Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF RIGHT ANGLED ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-MALE; Filter Feature: NO; Additional Features: INSERTION LOSS MAX AT 6GHZ; DIN Conformance: NO;
Median Price
$11.830
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$1.541
100+ parts
$1.402
1k+ parts
$1.264
10k+ parts
-
PEI Genesis
$6.440
Powell Electronics
$8.390
$7.490
Farnell
$11.720
$8.640
$7.910
DigiKey
$9.518
$7.049
RS Americas
$12.340
$9.500
$9.010
Mouser Electronics
$17.680
$14.200
Element14
$18.490
$13.690
RS (Exports)
$20.980
$16.150
Newark
$22.640
$18.930
Verical
Master Electronics
$9.800
$8.330
Chip1Stop
$9.564
Arrow
$14.620
Nova Conductors
$9.040
VNN
Electro Sonic
$9.240
$8.740
IBS Electronics
$12.710
$10.785
Prism Electronics
R&J Components
QIE Inc.
Vyrian
Advanced Electronics
Ampacity Inc.
$2.850
Corohmni
$8.992
Continental Prestige Electronics
$8.860
Netroflash
$8.588
$8.408
Allen Electronics Distributors
$12.990
$9.990
Perfect Parts
Argo Parts USA
RF Adapters 142-0901-941 attributes and parameters. Explore more RF Adapters devices from Johnson Components
Adapter Style:
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
MIL Conformity:
Maximum Operating Frequency:
Option:
Panel Mount:
Voltage Standing Wave Ratio:
142-0901-941 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.80.00
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Wuxi Xuyang Electronic
Electronic Transistors
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
STM32H743IIT6
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
5712
Api Technologies
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; IEC Conformity: NO; JESD-609 Code: e4; Contact Material: BRASS/BERYLLIUM COPPER;
BNC-V75
Phoenix Contact
RF CONNECTOR ADAPTER;
1329505
Winchester Interconnect
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Adapter Style: N-SMA; Filter Feature: NO; Contact Style: COAX;
5106
Aeroflex/inmet
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; Coupling Type: THREADED; Characteristic Impedance: 50 ohm; MIL Conformity: NO;
R191966001W
Radiall S A
Radiall S A R191966001W RF Adapter features 0.76 dB insertion loss, 1.7 VSWR, and 40 GHz max operating frequency. With SMA2.9-SBMO style, it's ideal for high-frequency RF connections in aerospace and telecommunications applications.
242224
Amphenol
Amphenol's 242224 RF Adapter features PTFE insulator, F-SMB style, and BeCu contact material. Ideal for commercial applications, this straight adapter with AU finish is designed for coax connections in RF systems. Its jack-jack body style offers reliable mounting in natural color insulators.
242107RP
Amphenol's 242107RP RF Adapter features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for commercial applications with a frequency range up to 11 GHz. Operating temperatures from -65°C to 165°C make it versatile for various environments.
1053633-1
TE Connectivity
TE Connectivity's 1053633-1 RF Adapter features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for commercial applications up to 18 GHz with a VSWR of 1.1, this QMA-SMA adapter is made of stainless steel and operates b/w -65°C to 165°C.
2818148
RF CONNECTOR ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; Mating Contact Finish: NOT SPECIFIED; Panel Mount: NO; Characteristic Impedance: 50 ohm;
6700
Pomona Electronics
The Pomona Electronics 6700 RF Adapter features BNC-BNC-BNC style with gold finish, ideal for 4 GHz applications. With a VSWR of 1.3 and impedance of 50 ohm, it offers high-quality signal transmission. The adapter has bayonet coupling and PTFE insulator for reliable connections in RF U setups.
5189
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; Filter Feature: NO; Contact Material: BERYLLIUM COPPER; Coupling Type: THREADED;
R125771001
R125771001 by Radiall S A is an RF adapter with 0.3 dB insertion loss, gold termination contact finish, and threaded coupling type. It features a 50 ohm characteristic impedance and operates up to 18 GHz. Ideal for applications requiring SMA-SMA right-angled adapters with male-female contact gender.
5018
Cobham Plc
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; Characteristic Impedance: 50 ohm; IEC Conformity: NO; MIL Conformity: NO;
22-10-53
Trompeter Electronics
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-MALE; MIL Conformity: NO; Coupling Type: SNAP-THREADED; DIN Conformance: NO;
132171
The Amphenol 132171 RF Adapter features threaded coupling, PTFE insulator, and operates b/w -65 to 165°C. With SMA-SMA adapter style, it has a characteristic impedance of 50 ohm and supports up to 18 GHz frequency. Ideal for commercial applications requiring reliable RF connections with male-female contact gender.
1056344-1
TE Connectivity's 1056344-1 RF Adapter has a 0.717" body length, 0.26 dB insertion loss, and threaded coupling type. Ideal for applications requiring QMA-SMA adapter style with 50 ohm impedance, it operates up to 27 GHz frequency range. Suitable for commercial use in various RF straight adapter connections.
5247
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; Panel Mount: NO; Termination Contact Finish: GOLD; Contact Material: BERYLLIUM COPPER;
22-07-5
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-MALE; Panel Mount: NO; Filter Feature: NO; Adapter Style: C-N;
221551-1
Tyco Electronics Amp
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Additional Features: STANDARD: MIL-C-39012; IEC Conformity: NO; Body or Shell Style: JACK;
1057463-1
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; MIL Conformity: NO; Insertion Loss: .18 dB; Filter Feature: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
142-0901-941
Cinch Connectivity Solutions
RF RIGHT ANGLED ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-MALE; Maximum Operating Frequency: 18 GHz; Insertion Loss: .25 dB; Panel Mount: NO;
Vertiv
RF RIGHT ANGLED ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-MALE; Insertion Loss: .25 dB; Additional Features: INSERTION LOSS MAX AT 6 GHZ; Body or Shell Style: JACK-PLUG;
Bel Fuse
RF RIGHT ANGLED ADAPTER; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Voltage Standing Wave Ratio: 1.04; Contact Material: BERYLLIUM COPPER, BERYLLIUM COPPER; Maximum Operating Temperature (Cel): 165;
142-0901-931
Johnson Components
RF RIGHT ANGLED ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; Characteristic Impedance: 50 ohm; MIL Conformity: NO; Voltage Standing Wave Ratio: 1.32;
142-0901-401
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Coupling Type: THREADED; Insertion Loss: .25 dB; MIL Conformity: NO;
142-0901-801
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Insertion Loss: .25 dB; Filter Feature: NO; Characteristic Impedance: 50 ohm;
142-0901-806
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Mating Contact Finish: NOT SPECIFIED; Insulator Material: POLYTETRAFLUOROETHYLENE; Characteristic Impedance: 50 ohm;
142-0901-821
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; Characteristic Impedance: 50 ohm; Body or Shell Style: PLUG-JACK; Insertion Loss: .15 dB;
142-0901-826
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO; Insertion Loss: .15 dB;
142-0901-811
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; Voltage Standing Wave Ratio: 1.23; Insertion Loss: .15 dB; Coupling Type: THREADED;
142-0901-816
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; Characteristic Impedance: 50 ohm; Voltage Standing Wave Ratio: 1.23; Body or Shell Style: PLUG;
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Panel Mount: NO; MIL Conformity: NO; Coupling Type: THREADED;
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Characteristic Impedance: 50 ohm; MIL Conformity: NO; Coupling Type: THREADED;
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; Voltage Standing Wave Ratio: 1.23; MIL Conformity: NO; Maximum Operating Frequency: 18 GHz;
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; Panel Mount: NO; MIL Conformity: NO; Body or Shell Style: PLUG-JACK;
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Insertion Loss: .25 dB; IEC Conformity: NO; Panel Mount: YES;
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; Insertion Loss: .25 dB; Characteristic Impedance: 50 ohm; Filter Feature: NO;
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; DIN Conformance: NO; MIL Conformity: NO; Panel Mount: NO;
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; Contact Material: NOT SPECIFIED; Additional Features: INSERTION LOSS MAX AT 6 GHZ; Insertion Loss: .25 dB;
RF RIGHT ANGLED ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; Dielectric Withstanding Voltage (V): 2100VAC; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 14 GHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved