Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-C-39012; Filter Feature: NO; DIN Conformance: NO;
Median Price
$4.810
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$2.740
100+ parts
$2.090
1k+ parts
-
10k+ parts
PEI Genesis
$2.750
Richardson RFPD
$5.250
$3.720
$3.140
Element14
$5.803
DigiKey
$6.180
$4.462
$4.016
Mouser Electronics
$6.710
$4.870
$3.960
Farnell
$6.915
$6.219
$5.752
Newark
$13.530
$11.810
$11.320
Verical
$2.973
$2.855
Arrow
Avnet
$2.880
Master Electronics
$3.860
$3.840
Chip1Stop
$4.650
Nova Conductors
$5.144
Component Electronics Inc.
$5.380
$4.040
$3.500
Mobius Materials
$9.662
$7.696
Vyrian
Electro Sonic
$5.500
$4.150
$4.110
IBS Electronics
$6.190
$5.499
$5.471
Bisco
VNN
Semtec, LLC
Prism Electronics
Lantek
Inventory MP
Bristol Electronics
Elcom Components
Resion
Sunrise Surplus Inc.
DF Sales Co.
Ampacity Inc.
$2.140
Allen Electronics Distributors
$5.610
$4.210
Continental Prestige Electronics
$9.840
$6.430
Authorized Procurement Solutions
Perfect Parts
Argo Parts USA
GreenTree Electronics
Formix International (Excess)
SSMA Connectors 142-0701-841 attributes and parameters. Explore more SSMA Connectors devices from Johnson Components
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
142-0701-841 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
SDR0604-101KL
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Philips Components
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
901-9602-3SF
Amphenol
Amphenol 901-9602-3SF is an RF SMA connector with 0.11 dB insertion loss, gold termination contact finish, and threaded coupling type. It has a max operating frequency of 12.4 GHz and is ideal for applications requiring a 50 ohm characteristic impedance, such as cable mounting in high-frequency communication systems.
142-1701-616
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: MICROSTRIP; Termination Contact Finish: NICKEL; Mounting Style: STRAIGHT;
1045651-1
TE Connectivity
TE Connectivity's 1045651-1 is an RF SSMA connector with a threaded coupling type and PTFE insulator material. With a max operating frequency of 38 GHz, it offers low insertion loss of 0.5 dB and high insulation resistance of 5 Gohm. Ideal for commercial applications requiring reliable connections in environments ranging from -65 to 165°C.
2037-5100-00
Tyco Electronics M/a-com
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: THREADED; Panel Mount: NO; Additional Features: OPERATING FREQUENCY AS PER MIL-C-17;
R125.426.000
Radiall S A
Radiall S A's R125.426.000 is an RF SMA connector with a threaded coupling type and a characteristic impedance of 50 ohm. It has a max operating frequency of 18 GHz and is suitable for commercial applications.
141-0701-402
Vertiv
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1; Maximum Operating Frequency: 18 GHz;
2052-1352-02
M/a-com Technology Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Body or Shell Style: RECEPTACLE; Panel Mount: YES;
R124172123W
R124172123W by Radiall S A is an RF SMA connector with gold termination, threaded coupling, and PTFE insulator. It has a VSWR of 1.52, operates up to 12.4 GHz, and features a 50 ohm impedance. Ideal for applications requiring high-frequency signal transmission in cable assemblies with right-angle mounting needs.
BJ27
Trompeter Electronics
RF BNC CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Style: STRAIGHT; No. of Ports: 1; Total No. of Contacts: 1;
R125.236.000
R125.236.000 by Radiall S A is an RF SMA connector with 50 ohm impedance, 0.21 dB insertion loss, and 1.4 VSWR suitable for RG-188 cables. It has a dielectric voltage of 750VAC, gold-nickel termination finish, and PTFE insulator ideal for applications requiring durability up to 500 cycles at temperatures ranging from -65 to 165 °C.
1340151
Phoenix Contact
RF SMA CONNECTOR;
132170-12N
2921-6002
Sv Microwave
The SV Microwave 2921-6002 SSMA Connector features a dielectric voltage of 1400VAC, insulation resistance of 5G ohm, and operating frequency up to 18GHz. Ideal for RF applications requiring a durable female jack connector with a characteristic impedance of 50 ohm.
M39012/83B3004
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Termination Contact Finish: GOLD; Mounting Style: STRAIGHT;
M39012/55-4502
Winchester Interconnect
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Filter Feature: NO; Mounting Type: CABLE;
142-0701-301
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Panel Mount: NO;
901-9531-3SF
Amphenol 901-9531-3SF is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 1.15 VSWR. Ideal for RG-316 cables in applications requiring durability up to 500 cycles, such as commercial-grade communication systems operating at frequencies up to 12.4 GHz.
142-0761-891
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.5; Filter Feature: NO; IEC Conformity: NO;
R125.462.001
R125.462.001 by Radiall S A is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.3 dB, suitable for applications up to 18 GHz. Featuring gold-plated contacts with nickel barrier, it offers high durability with 500 cycles and insulation resistance of 5 Gohm. This panel-mount connector has a threaded coupling type and operates in temperatures ranging from -65 to 165 °C.
R125072000W
R125072000W by Radiall S A is an RF SMA connector with 50 ohm impedance, gold termination finish, and 1.08 dB insertion loss. It is suitable for applications requiring a max operating frequency of 18 GHz, such as in cable assemblies for high-frequency communication systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
142-0701-851
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; IEC Conformity: NO; Mounting Style: STRAIGHT;
Bel Fuse
The Bel Fuse 142-0701-851 SSMA Connector features a body length of 0.375", insulation resistance of 5G ohm, and dielectric voltage of 1400VAC. Ideal for RF applications up to 18GHz, this female connector with brass shell is designed for surface mount on boards, offering durability with 500 cycles.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; DIN Conformance: NO; Panel Mount: NO;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Type: BOARD;
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Coupling Type: THREADED; Insulator Material: POLYTETRAFLUOROETHYLENE;
142-0701-801
Emerson Electric
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Termination Type: SOLDER;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; DIN Conformance: NO; Maximum Operating Frequency: 18 GHz;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1414VAC; Insulator Material: POLYTETRAFLUOROETHYLENE; Contact Style: COAX;
Bel Fuse's 142-0701-801 SSMA Connector features a dielectric voltage of 1400VAC, insulation resistance of 5000000000 ohm, and operates b/w -65 to 165 °C. Ideal for RF applications up to 18 GHz, this female connector with brass shell is durable for 500 cycles in commercial settings.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Additional Features: STANDARD: MIL-C-39012; Manufacturer Series: SMA;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Ports: 1;
142-0701-201
Bel Fuse's 142-0701-201 is an RF SMA connector with a characteristic impedance of 50 ohm and dielectric voltage of 1400VAC. With a durability of 500 cycles, it is ideal for commercial applications requiring high insulation resistance and operating temperatures ranging from -65 to 165°C.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Body Depth: .375 inch; Body Diameter: .312 inch;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Termination Contact Finish: GOLD (30); Mounting Style: STRAIGHT;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; Manufacturer Series: SMA; Panel Mount: NO;
142-0701-871
The Bel Fuse 142-0701-871 is an RF SMA connector with a dielectric voltage of 1400VAC, impedance of 50 ohm, and operating frequency up to 18 GHz. It is used in commercial applications requiring durable connectors for board mounting with a right-angle style.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Maximum Operating Frequency: 18 GHz; Body or Shell Style: RECEPTACLE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Termination Contact Finish: GOLD; JESD-609 Code: e4;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mounting Style: STRAIGHT; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved