Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FEED THROUGH CAPACITOR;
Median Price
$0.096
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.340
100+ parts
$0.108
1k+ parts
$0.091
10k+ parts
$0.074
Master Electronics
$0.534
-
$0.110
$0.071
Chip1Stop
Arrow
$0.073
Verical
$0.072
Farnell
$0.117
$0.097
$0.086
Nova Conductors
Mobius Materials
$0.170
$0.140
Vyrian
VNN
A2Z Electronics, Inc.
Bristol Electronics
$0.188
$0.113
LIBRA Elektronik GmbH
Prism Electronics
Advanced Electronics
$0.025
$0.023
$0.020
Aztec Data Supply Inc.
$0.080
Aranea Global
$0.089
$0.085
Argo Parts USA
$0.088
Continental Prestige Electronics
Corohmni
$0.369
Perfect Parts
Authorized Procurement Solutions
Data Line Filters 500X14N101MV4T attributes and parameters. Explore more Data Line Filters devices from Johanson Dielectrics
Filter Type:
500X14N101MV4T Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Johanson Dielectrics, Inc. has been a worldwide producer of high quality ceramic chip capacitors for over 30 years. Our success has enabled steady expansion of manufacturing facilities and focus on new product development ensuring our ability to respond to the ever changing needs of our customers. Our corporate mission is to achieve profitable growth by totally satisfying our customer's requirements for high quality, technologically advanced ceramic chip capacitors. We establish and maintain long term sourcing relationships with our customers by providing responsive service, competitive costs and lead times, and superior product quality. Advanced materials engineering, state of the art processing, statistical analysis tools, and a quality system which emphasizes continuous process improvement are all employed to achieve goals in defect reduction, cost reduction, and design and manufacturing cycle time improvement. Johanson Dielectrics designs and manufactures capacitors in a state-of-the-art facility in Southern California. Located in Camarillo, this facility produces Standard and High Voltage SMT Ceramic Capacitors, as well as a variety of standard and custom High Voltage & High Capacitance value Ceramic Capacitors.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
EU2B-YS3303C
Idec
ROTARY SWITCH;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
ACM2520-301-2P-T002
TDK
TDK's ACM2520-301-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.4A. With dimensions of L2.5xB2.0xH1.2 (mm), it offers insulation resistance of 10 Mohm for data line filtering applications in electronics, ensuring reliable performance from -40 to 85 °C temperatures.
ACH4518-102-TD01
TDK ACH4518-102-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 150 MHz. It has 1000 Mohm insulation resistance, rated for 50 V and 2 A current. Ideal for data line filtering in surface mount applications due to its compact L4.5XB1.8XH3.2 mm dimensions and -25 to 85 °C operating temperature range.
PCMF1USB3SZ
The Nexperia PCMF1USB3SZ is a 5V data line filter with 5 terminals, IEC approval, and -40 to 85°C operating temperature range. It has a compact size of L1.22xB0.82xH0.6 mm and capacitance of 0.25uF. Ideal for applications requiring noise filtering in USB data lines.
7448262013
Wuerth Elektronik & Kg
Wurth Elektronik 7448262013 Data Line Filter has UL approval, rated voltage of 250V, and inductance of 1300uH. With dimensions L43.5xB23.5xH43.0 (mm), it is ideal for applications requiring a max operating temperature of 125°C and min of -40°C, rated current up to 20A.
HZ0603B112R-10
Laird Technologies
HZ0603B112R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With a max frequency of 1000 MHz and DC resistance of 0.8 ohm, it is ideal for applications requiring noise suppression in high-frequency circuits. This surface mount filter measures L1.6XB.8XH.8 mm and has an output impedance of 1100 OHM, making it suitable for compact electronic devices.
DLW21HN121SQ2L
Murata Manufacturing
DLW21HN121SQ2L by Murata is a Data Line Filter with 2 functions and rated voltage of 50V. It has a max operating temperature of 85°C and min insulation resistance of 10 Mohm. This filter is suitable for applications requiring noise suppression in data lines.
FBMJ3216HS480NT
Taiyo Yuden
Taiyo Yuden's FBMJ3216HS480NT is a chip bead data line filter with 2 terminals. It operates b/w -40 to 85 °C, offering 48 OHM output impedance and 6A rated current. Ideal for surface mount applications, it measures L3.2XB1.6XH1.1 mm and is constructed with ferrite material for effective noise suppression at frequencies up to 100 MHz.
MMZ2012S121AT000
MMZ2012S121AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.15 ohm and output impedance of 120 ohm, suitable for surface mount applications in electronics to suppress electromagnetic interference.
BLM31SN500SH1L
Murata Manufacturing's BLM31SN500SH1L is a FERRITE CHIP filter with 2 terminals, AEC-Q200 compliant. It operates b/w -55°C to 125°C, has a DC resistance of 0.0016 ohm, and rated current of 12A. Ideal for data line filtering applications with an output impedance of 50 OHM.
BLM18PG121SN1D
Murata's BLM18PG121SN1D is a chip bead data line filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, offering 120 ohm impedance at 100MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
2425-001-X5U0-102AALF
Tusonix
FEED THROUGH CAPACITOR; Mounting Type: PCB MOUNT; Capacitance: 1000 uF; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel; Minimum Insulation Resistance: 10000 Mohm;
BLM41PG750SN1L
Murata Manufacturing's BLM41PG750SN1L is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 0.025 ohm and output impedance of 75 OHM at frequencies ranging from 100 MHz. Ideal for surface mount applications requiring high-frequency filtering.
MMZ2012R301ATD25
MMZ2012R301ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP technology, it has 2 terminals and operates b/w -55 to 125 °C. With dimensions of L2.0xB1.25xH0.85 (mm), it's ideal for automotive electronics and industrial applications due to its 300 OHM output impedance and 0.6A rated current capacity.
7427512
Wurth Elektronik 7427512 is a chip bead data line filter with 3 functions. It operates b/w -40 to 125°C, has an output impedance of 580Ω, and rated current of 5A. Used in surface mount applications for filtering frequencies from 25-100MHz in electronic circuits.
74279226101
Wurth Elektronik 74279226101 is a chip bead data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has 2 terminals, and measures L4.5XB3.2XH2.3 (mm). With a max frequency of 1100 MHz and output impedance of 100 OHM, it's ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.
ACM9070-701-2PL-TL
ACM9070-701-2PL-TL by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and insulation resistance of 10 Mohm. It operates b/w -25 to 85 °C and has a DC resistance of 0.01 ohm. Ideal for applications requiring filtering in data lines with surface mounting type.
NFL21SP506X1C3D
Murata Manufacturing's NFL21SP506X1C3D is a 16V data line filter with 1000 Mohm insulation resistance. Featuring 0.305uH inductance, it operates b/w -55 to 125 °C and has a rated current of 0.15A. Ideal for applications requiring noise suppression in data lines with three terminals, this surface mount filter measures L2.0xB1.25xH0.85mm and uses TIN terminal finish.
744231091
Wurth Elektronik 744231091 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has 4 terminals, tin finish, and dimensions of L2.0xB1.2xH1.2 (mm). Ideal for applications requiring filtering in data lines with a current rating of 0.37A.
MPZ1608S121ATAH0
The TDK MPZ1608S121ATAH0 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 120 ohms and rated current of 2A, suitable for surface mount applications in various electronic devices.
EMIF06-USD14F3
STMicroelectronics
EMIF06-USD14F3 by STMicroelectronics is a data line filter with 6 functions and 15 terminals. It operates b/w -30°C to 85°C, with a capacitance of 12uF. This surface mount filter is ideal for applications requiring IEC and UL approvals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
500X18W104MV4E
Johanson Dielectrics
Johanson Dielectrics' 500X18W104MV4E is a 50V feed through capacitor with matte tin finish. It has a capacitance of 100000uF and dimensions of L2.150xB1.6xH1.27mm, suitable for data line filters applications.
500X07W102MV4T
500X07W102MV4T by Johanson Dielectrics is a 50V feed through capacitor with capacitance of 0.000000001 uF. It measures 0.7112mm in width, 1.2192mm in length, and 0.508mm in height. Ideal for data line filtering applications due to its compact size and high voltage rating.
500X07W222MV4T
500X07N470MV4T
500X14N221MV4T
500X43W474MV4E
500X14W471MV4T
500X14N100MV4T
500X14N270MV4T
500X14W101MV4T
500X14W152MV4T
500X14W221MV4T
500X14W223MV4T
FEED THROUGH CAPACITOR; Length: 1.626 mm; Width (mm): 0.889; No. of Terminals: 4; Rated Voltage: 50 V; JESD-609 Code: e3;
500X14N470MV4T
500X14W472MV4T
500X14N5R0DV4T
500X14N5R6DV4T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved