Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CERAMIC LPF; Maximum Insertion Loss: .75 dB; Center/Cutoff Frequency (fo/fc): 2450 MHz; Width (mm): 0.5; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Ceramic Filters 2450FM07A0035 attributes and parameters. Explore more Ceramic Filters devices from Johanson Dielectrics
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
Maximum Operating Temperature:
Minimum Operating Temperature:
Width (mm):
Johanson Dielectrics, Inc. has been a worldwide producer of high quality ceramic chip capacitors for over 30 years. Our success has enabled steady expansion of manufacturing facilities and focus on new product development ensuring our ability to respond to the ever changing needs of our customers. Our corporate mission is to achieve profitable growth by totally satisfying our customer's requirements for high quality, technologically advanced ceramic chip capacitors. We establish and maintain long term sourcing relationships with our customers by providing responsive service, competitive costs and lead times, and superior product quality. Advanced materials engineering, state of the art processing, statistical analysis tools, and a quality system which emphasizes continuous process improvement are all employed to achieve goals in defect reduction, cost reduction, and design and manufacturing cycle time improvement. Johanson Dielectrics designs and manufactures capacitors in a state-of-the-art facility in Southern California. Located in Camarillo, this facility produces Standard and High Voltage SMT Ceramic Capacitors, as well as a variety of standard and custom High Voltage & High Capacitance value Ceramic Capacitors.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitronic Enterprise
LFCN-320D+
Mini-circuits
LFCN-320D+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at 180000 kHz. Operating b/w -55 to 100 °C, it has a center frequency of 460 MHz and max insertion loss of 3 dB. Ideal for applications requiring surface mount filters with 50 OHM impedance.
SFECV10M7KA00-R0
Murata Manufacturing
SFECV10M7KA00-R0 by Murata Manufacturing is a ceramic filter with 3 terminals. It has a max operating temperature of 80°C and a min operating temperature of -20°C. This surface mount filter has a center/cutoff frequency of 10.7 MHz and an insertion loss of 6 dB, making it suitable for various applications requiring precise filtering at high frequencies.
LFCN-3800
The Mini-circuits LFCN-3800 is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3.45 GHz. With a compact size of 3.2x1.6x0.94 mm, it's ideal for surface mount applications in RF circuits requiring precise filtering at frequencies up to 4.85 GHz.
HFCW-5500+
The Mini-circuits HFCW-5500+ is a Ceramic HPF filter with a center frequency of 16750 MHz, handling up to 2.5 W power. Operating from -55°C to 125°C, it's ideal for RF applications requiring a surface mount ceramic filter with 50 Ohm impedance.
LFCN-120
LFCN-120 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 105 MHz. With a center frequency of 195 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating from -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 8.5 W efficiently.
LFCN-800+
LFCN-800+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 990 MHz. With a compact size of L3.2XB1.6XH0.94 (mm), it's ideal for surface mount applications in RF circuits, offering low insertion loss of 3 dB and VSWR of 1.2 for impedance matching.
5697BP44A0360E
Johanson Dielectrics
Johanson Dielectrics' 5697BP44A0360E is a Ceramic BPF filter with 5662.5 MHz center frequency, 2.5 dB insertion loss, and 3 W power rating. Ideal for surface mount applications in the temperature range of -40 to 85°C, it features silver/platinum terminal finish and TR packing method.
LFCN-2250D
LFCN-2250D by Mini-circuits is a Ceramic LPF filter with 4 terminals, 2575 MHz cutoff frequency, and 20 dB attenuation at max frequency. Ideal for applications requiring a compact surface mount filter with low insertion loss and high power handling up to 10W.
LFCN-6000D
LFCN-6000D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3.7 GHz. With a center frequency of 6.8 GHz and insertion loss of 3 dB, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has an impedance of 50 ohms and dimensions of L3.2xB1.6xH0.94 mm.
LFCN-1800
LFCN-1800 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 375 MHz. With a center frequency of 2125 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling capabilities.
BFCN-1860+
BFCN-1860+ by Mini-circuits is a ceramic bandpass filter with a center frequency of 1860 MHz and max insertion loss of 3.5 dB. It has a temperature range from -55 to 100 °C and is suitable for surface mount applications in the 50 OHM impedance range, with SMA FEMALE output connector.
7000BP15A1600E-AEC
Johanson Technology
7000BP15A1600E-AEC by Johanson Technology is a Ceramic BPF filter with a center frequency of 7000 MHz and max insertion loss of 2 dB. It operates b/w -40°C to 105°C, suitable for applications requiring a compact design with surface mounting type and an input power of up to 3W.
2450BM14G0011T-AEC
Johanson Dielectrics' 2450BM14G0011T-AEC is a ceramic BPF filter with a center frequency of 2450 MHz and max insertion loss of 1.8 dB. It operates in temperatures ranging from -40 to 105°C and is suitable for surface mount applications requiring an I/O impedance of 50 ohms.
HFCN-5500D+
HFCN-5500D+ by Mini-circuits is a ceramic filter with a cutoff frequency of 5500 MHz and attenuation of 30 dB at max frequency. It operates in temperatures ranging from -55 to 100 °C and is suitable for surface mount applications requiring high pass filtering.
2450FM07D0034T
2450FM07D0034T by Johanson Technology is a FERRITE CHIP ceramic filter with a center frequency of 2450 MHz. It has a max insertion loss of 1 dB and can handle an average input power of 3 W. Ideal for surface mount applications in the temperature range of -40 to 85°C, this filter is designed for use in systems requiring a compact and efficient filtering solution.
SFECF10M7FA00-R0
Murata's SFECF10M7FA00-R0 is a Ceramic BPF filter with 6 terminals, operating from -20 to 80°C. It offers a center frequency of 10.7 MHz and max insertion loss of 3 dB. Ideal for surface mount applications with an impedance of 330Ω, it measures L3.45xB3.1xH1.3 mm and is suitable for various electronic devices requiring precise signal filtering.
LFCN-1800+
LFCN-1800+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 300000 kHz. With a center frequency of 2125 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters in the 50 OHM impedance range.
LFCN-80+
LFCN-80+ by Mini-circuits is a ceramic LPF filter with a center frequency of 145 MHz and attenuation of 20 dB at min frequency and 40 dB at max frequency. It is used in applications requiring surface mount filters with a wide operating temperature range (-55 to 100 °C) and low insertion loss (3 dB).
LFCN-2250
LFCN-2250 by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 2575 MHz and offers attenuation of up to 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 325000 kHz and an I/O impedance of 50 ohms.
LFCN-1000D
LFCN-1000D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3 MHz. With a center frequency of 1300 MHz and VSWR of 1.3, it's ideal for RF applications requiring high attenuation and low insertion loss in a compact surface-mount design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved