Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
2450AT18B100E by Johanson Dielectrics is an RF antenna component with a characteristic impedance of 50 ohm. It operates b/w -40°C to 85°C, covering frequencies from 2400 MHz to 2500 MHz. This antenna is suitable for various RF and microwave applications requiring reliable performance in a wide temperature range.
Median Price
$0.454
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.560
100+ parts
$0.357
1k+ parts
$0.268
10k+ parts
$0.214
Arrow
-
Chip1Stop
$0.224
Farnell
$0.284
$0.213
$0.189
Verical
$0.696
$0.622
Nova Conductors
$0.353
Vyrian
Chip Stock
RLX Solution Inc.
North Shore Components
ACDS - Activité Composants Distribution Service
Q Components
VNN
Bristol Electronics
ComSIT USA
ComSIT Distribution GmbH
Halfin
Sunrise Surplus Inc.
Prism Electronics
Cyclops Electronics Ltd
NexGen Digital
Argo Parts USA
$0.253
$0.245
Continental Prestige Electronics
$0.248
Corohmni
$0.270
Aztec Data Supply Inc.
$1.030
Advanced Electronics
$1.549
$1.410
$1.270
Perfect Parts
Authorized Procurement Solutions
XScomponents
$0.410
Cyclops Electronics Ltd (Excess)
Speed Components Ltd (Excess)
iBuyXS LLC
Computer Components Inc. - USA
Glotronic Ltd.
Netroflash
$0.346
$0.335
$0.328
Futuretech Components
The high maximum operating temperature ensures a stable performance even in harsh environmental conditions, making it a reliable choice for various applications.
The low minimum operating temperature allows the antenna to function effectively in cold environments, expanding its usability in different settings.
The TIN terminal finish provides good conductivity and corrosion resistance, enhancing the longevity and performance of the antenna.
Being categorized as an 'other' type of antenna indicates versatility and potential for use in various RF and microwave communication systems, offering flexibility in application.
The 50 ohm characteristic impedance is a standard in RF communication systems, ensuring compatibility with a wide range of devices and minimizing signal loss during transmission.
The minimum operating frequency of 2400 MHz allows the antenna to be used in Wi-Fi, Bluetooth, and other wireless communication systems operating in this frequency range.
With a maximum operating frequency of 2500 MHz, the antenna is well-suited for applications that require high-frequency communication, such as certain satellite and radar systems.
RF/Microwave Antennas 2450AT18B100E attributes and parameters. Explore more RF/Microwave Antennas devices from Johanson Dielectrics
Additional Features:
Characteristic Impedance:
Construction:
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
Johanson Dielectrics, Inc. has been a worldwide producer of high quality ceramic chip capacitors for over 30 years. Our success has enabled steady expansion of manufacturing facilities and focus on new product development ensuring our ability to respond to the ever changing needs of our customers. Our corporate mission is to achieve profitable growth by totally satisfying our customer's requirements for high quality, technologically advanced ceramic chip capacitors. We establish and maintain long term sourcing relationships with our customers by providing responsive service, competitive costs and lead times, and superior product quality. Advanced materials engineering, state of the art processing, statistical analysis tools, and a quality system which emphasizes continuous process improvement are all employed to achieve goals in defect reduction, cost reduction, and design and manufacturing cycle time improvement. Johanson Dielectrics designs and manufactures capacitors in a state-of-the-art facility in Southern California. Located in Camarillo, this facility produces Standard and High Voltage SMT Ceramic Capacitors, as well as a variety of standard and custom High Voltage & High Capacitance value Ceramic Capacitors.
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
642
Lockheed Martin Microwave
Lockheed Martin Microwave's 642 is a circularly polarized horn antenna with a gain of 16.5 dB. Operating b/w 5400-8200 MHz, it boasts a low VSWR of 1.15. Ideal for RF applications requiring high gain and precise polarization control.
47950-2011
Molex
Molex's 47950-2011 is an Omni-Directional RF antenna with linear polarization, ideal for wireless applications. Featuring a gain of 3.5 dB and operating frequency range from 2400 MHz to 2483.5 MHz, it is designed for base station and broadcast transmission setups with a characteristic impedance of 50 ohm.
PRO-OB-440
Abracon
PRO-OB-440 by Abracon is a RF/Microwave Antenna with 50 ohm impedance. It operates b/w 2400-2500 MHz, ideal for Bluetooth, RFID, WLAN applications. With a VSWR of 2.65 and surface mount feature, it's suitable for mobile station antennas.
ANT3216LL00R2400A
ANT3216LL00R2400A by Yageo is an RF/Microwave Antenna with a ceramic and metal-sealed co-fired package. It has an omni-directional polarization and operates in the frequency range of 2400-2500 MHz. This antenna is commonly used for Bluetooth, ISM, wireless, and Zigbee applications.
ANT-DB1-RAF-RPS
Linx Technologies
ANT-DB1-RAF-RPS by Linx Technologies is an RF antenna with a VSWR of 1.9, omni-directional construction, and operates b/w 2400-2483 MHz. Ideal for base station/broadcast transmission applications, it has a temperature range of -40 to 80°C and a characteristic impedance of 50 ohm.
2042810100
Molex 2042810100 is a plastic module antenna with omni-directional construction for Bluetooth, wireless, and Zigbee applications. Linear polarization, suitable for mobile station antennas, operates b/w 2400-2483.5 MHz frequencies. Features panel mount for easy installation.
1461750001
Molex 1461750001 is an Omni-Directional RF antenna with 3dB gain. Linear polarization, operating from 2400MHz to 2483.5MHz. Ideal for Wireless/Zigbee applications due to its component construction and ANTENNA-OTHER type.
2195835-1
TE Connectivity
TE Connectivity's 2195835-1 is a RF/Microwave Antenna with VSWR of 2.5, linear polarization, and 3.2 dB gain. Ideal for mobile station applications, it has a characteristic impedance of 50 ohm and features panel mounting.
ACAG1204-915-T
Abracon's ACAG1204-915-T is a ceramic, metal-sealed cofired RF antenna with a VSWR of 2. It operates in temperatures from -40°C to 85°C and has an omni-directional linear polarization. Ideal for ISM/RFID/SIGFOX applications, this mobile station antenna offers a bandwidth of 15 MHz and features surface mounting.
W3544A
Pulse Electronics
W3544A by Pulse Electronics is a RF/Microwave Antenna for mobile stations with 50 ohm impedance. It supports 2G/3G/LTE applications, operates b/w -45°C to 85°C, and handles up to 3W transmission power. With a frequency range of 824-2170 MHz, it features a surface mount design in plastic/epoxy body.
2241
Thales Components
BASE STATION/BROADCAST TRANSMISSION ANTENNA; Minimum Operating Frequency: 1900 MHz; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 70 Cel; Front-To-Back Ratio: 30 dB; Wind Rating: 125.268 mph;
ANN-MB-00
U-blox Ag
GPS ANTENNA;
ANT1204LL05R0915A
ANTENNA-OTHER; Maximum Operating Temperature: 105 Cel; Omni-Directional: YES; Bandwidth: 20 MHz; Minimum Operating Temperature: -40 Cel; Application: ISM/WIRELESS/ZIGBEE;
APAMP-111
Abracon's APAMP-111 is a COAXIAL GPS ANTENNA with 1.5 VSWR, 4.5 dB Gain, and RHCP Polarization. It operates b/w -40°C to 80°C, ideal for GPS applications requiring precise signal reception in various environments. The antenna has a 50 ohm impedance and features PANEL MOUNT installation for easy setup.
HA22016GC
Renesas Electronics
ANTENNA SUPPORT CIRCUIT; Polarization: LINEAR; Omni-Directional: NO;
2701362
Phoenix Contact
Phoenix Contact 2701362 is an Omni-Directional COAXIAL antenna with linear vertical polarization. It operates b/w -20°C to 65°C, ideal for mobile and multipoint communication systems. With a gain of 2 dB and beamwidths of 75° (E-plane) and 360° (H-plane), it's suitable for base station and broadcast transmission applications.
EFF6925A3S-15MHF1
Laird Technologies
RF/Microwave Antennas;
ANT-433-CW-QW-SMA
The Linx Technologies ANT-433-CW-QW-SMA is an omni-directional RF antenna with a max transmission power of 10W. It operates b/w 400MHz to 470MHz, ideal for Bluetooth, cellular, GSM, ISM, IoT, LTE, Sigfox, and Zigbee applications. With a VSWR of 2 and linear polarization, it can withstand temperatures from -40°C to 90°C.
W3127
Pulse Electronics' W3127 is a 50 ohm HELIX ANTENNA with 2.9 dB Gain, operating b/w 433-435 MHz. It can withstand temperatures from -40 to 85 °C, making it ideal for RF/Microwave applications requiring reliable performance in extreme conditions.
74889502450
Wuerth Elektronik & Kg
ANTENNA-OTHER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2450AT18D0100E
Johanson Technology
Johanson Technology's 2450AT18D0100E is a 2W RF antenna with 50 ohm impedance, operating from -40°C to 125°C. Ideal for applications in the 2400-2500 MHz frequency range, this component offers reliable performance in RF/Microwave systems.
2450AT18A100E
2450AT18A100E by Johanson Technology is a RF/Microwave Antenna with 50 ohm impedance, operating from 2400-2500 MHz. It can handle up to 2W power and operates b/w -40°C to 125°C. Ideal for applications requiring high-frequency transmission in various electronic devices.
2450AT18D0100E-AEC
Johanson Dielectrics
MOBILE STATION ANTENNA; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
2450AT45A100E
ANTENNA-OTHER; Minimum Operating Frequency: 2400 MHz; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 2500 MHz; Gain: 1 dB; Characteristic Impedance: 50 ohm;
2450AT07A0100T
MOBILE STATION ANTENNA; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Equivalence Code: DIE OR CHIP; Characteristic Impedance: 50 ohm; Terminal Finish: Tin (Sn);
2450AT42E010BE
MOBILE STATION ANTENNA; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 2480 MHz; Minimum Operating Frequency: 2400 MHz;
2450AD18A7250E
MOBILE STATION ANTENNA;
2450AD18A6050E
2450AD18A6050E-AEC
2450AT43A100E
2450AT43A100E by Johanson Technology is a RF/Microwave Antenna with 2W power, 50 ohm impedance, and 0.5 dB gain. It operates b/w 2400-2500 MHz, suitable for various wireless communication applications due to its compact size and high transmission power capabilities.
2450AT07A0100
ANTENNA-OTHER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
2450AT42E0100E
MOBILE STATION ANTENNA; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
2450AT18B100S
ANTENNA-OTHER; Minimum Operating Frequency: 2400 MHz; Maximum Operating Frequency: 2500 MHz; Additional Features: ANTENNA GAIN IS -0.5 DBI; JESD-609 Code: e3; Construction: COMPONENT;
2450AT18B100
ANTENNA-OTHER; Minimum Operating Frequency: 2400 MHz; Additional Features: ANTENNA GAIN IS -0.5 DBI; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Maximum Operating Frequency: 2500 MHz;
2450AT18A100-AEC
ANTENNA-OTHER; Maximum Operating Temperature: 125 Cel; Maximum Transmission Power: 2 W; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 2400 MHz; Construction: COMPONENT;
2450AT18A100S
ANTENNA-OTHER; Maximum Operating Frequency: 2500 MHz; Minimum Operating Frequency: 2400 MHz; Construction: COMPONENT; JESD-609 Code: e3; Maximum Operating Temperature: 125 Cel;
2450AT18A100
ANTENNA-OTHER; Additional Features: ANTENNA GAIN IS -0.5 DBI; Construction: COMPONENT; Maximum Transmission Power: 2 W; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm;
2450AT18A100R
ANTENNA-OTHER; Maximum Operating Temperature: 125 Cel; Construction: COMPONENT; Terminal Finish: Tin (Sn); Additional Features: ANTENNA GAIN IS -0.5 DBI; Characteristic Impedance: 50 ohm;
2450AT18D0100S
ANTENNA-OTHER; Maximum Operating Frequency: 2500 MHz; Maximum Operating Temperature: 125 Cel; Minimum Operating Frequency: 2400 MHz; Minimum Operating Temperature: -40 Cel; Additional Features: ANTENNA GAIN IS -1 DBI;
2450AT14A0100T
ANTENNA-OTHER; Minimum Operating Frequency: 2400 MHz; Minimum Operating Temperature: -40 Cel; Application: WLAN; Additional Features: ANTENNA GAIN IS -2.0 DBI; Omni-Directional: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved