Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BM06B-GHS-TBT(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.049" pitch, 10.75" length, and 100000000 ohm insulation resistance. Ideal for PCBs, it features POLYAMIDE insulator, Tin (Sn) over Copper (Cu) finish, and operates b/w -25 to 85 °C.
Median Price
$0.465
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
TLC Electronics
1+ parts
100+ parts
$0.362
1k+ parts
$0.250
10k+ parts
$0.226
RS (Exports)
-
$0.584
$0.512
Verical
$0.338
Nova Conductors
$0.306
Component Electronics Inc.
$0.500
$0.380
$0.330
Chip Stock
Vyrian
NAC Semi
$0.354
VNN
EMSNET
Diverse Electronics
ACDS - Activité Composants Distribution Service
Sunrise Surplus Inc.
Prism Electronics
Resion
Ampacity Inc.
$0.208
Semicontronic
$0.203
$0.202
Continental Prestige Electronics
$0.235
$0.230
Argo Parts USA
$0.228
Netroflash
$0.300
CoreStaff
$0.481
$0.237
$0.190
Advanced Electronics
$4.642
$4.410
Corohmni
$5.929
Aztec Data Supply Inc.
$7.160
Perfect Parts
GreenTree Electronics
Kepictronics
EMSNET (Excess)
Futuretech Components
Robosynatics
Lucentia Tech
$10.129
$9.923
The close proximity of mating contacts allows for efficient signal transmission and connection stability.
Long body length provides ample space for multiple contacts, making it suitable for applications requiring multiple connections.
High insulation resistance ensures reliable performance and prevents electrical leakage, enhancing safety.
The high dielectric voltage rating allows the connector to withstand high voltages, ensuring durability and protection.
Phosphor bronze is a reliable and durable material for contacts, offering good conductivity and corrosion resistance.
Having multiple contacts allows for multiple signal connections, making it suitable for complex circuitry applications.
Surface mount termination allows for easy and secure attachment to PCBs, facilitating quick and efficient assembly.
Headers & Edge Type Connectors BM06B-GHS-TBT(LF)(SN) attributes and parameters. Explore more Headers & Edge Type Connectors devices from J S T Mfg
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
BM06B-GHS-TBT(LF)(SN) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Crimson Semiconductor
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Eic Semiconductor
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
Shenzhen Socay Electronics
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
50-57-9003
Molex
The Molex 50-57-9003 is a board connector with a mating contact pitch of 0.1 inch. It has a body width of 0.099 inch and depth of 0.6 inch, making it suitable for various applications in headers & edge type connectors. Its insulator material is glass filled polyester, and it has a total of 3 contacts with female SQ PIN-SKT contact style.
50-57-9007
The Molex 50-57-9007 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It has 7 female contacts with SQ pin-skt style for cable mounting applications. The UL 94V-0 rated connector is made of glass filled polyester and meets commercial reliability standards.
M80-5002042
Harwin Plc
The Harwin PLC M80-5002042 is a 20-contact board connector with 0.079" mating contact pitch, suitable for PCB applications. Featuring tin finish with nickel barrier, it offers high insulation resistance of 100M ohm and operates b/w -55°C to 125°C. With a durable design rated for 500 cycles, this male plug connector is ideal for commercial use in electronics requiring reliable signal transmission.
306-022-520-102
Edac
Edac 306-022-520-102 is a 22-contact card edge connector with 0.156" pitch, rated at 5A power. With POLYETHYLENE POLYESTER insulator and UL94V-0 flammability, it operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and dielectric voltage withstand capabilities.
102387-1
TE Connectivity
TE Connectivity's 102387-1 is a board connector with 10 contacts, rated at 3A signal current. It features a mating contact pitch of 0.1", insulation resistance of 5G ohm, and operates in temperatures ranging from -65 to 105°C. Ideal for commercial applications requiring reliable female connectors with crimp termination.
53398-0571
Molex 53398-0571 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a male blade pin-skt contact style and surface mount termination on a straight receptacle body for durability in PCB mounting.
8-5353189-0
TE Connectivity 8-5353189-0 is a board stacking connector with 140 contacts, 2 rows, and 0.024" mating pitch. Ideal for commercial applications, it features a 200VAC dielectric voltage rating and polyethylene insulation material. Operating b/w -40°C to 85°C, this female connector offers durability with a 50-cycle lifespan.
DM3AT-SF-PEJM5
Hirose Electric
The Hirose Electric DM3AT-SF-PEJM5 is a card edge connector with 8 contacts, gold termination finish, and liquid crystal polymer insulator. It has a mating contact pitch of 0.043", withstands up to 500VAC, and operates b/w -25°C to 85°C. Ideal for board mounting applications in commercial settings with durability up to 10,000 cycles.
70553-0001
Molex 70553-0001 is a board connector with 0.1" pitch, matte tin finish, and glass-filled polycarbonate insulator. Ideal for commercial applications, it features right-angle mounting and solder termination for reliable connections in electronic devices.
09031646921
Harting Electronics & Kg
09031646921 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Body Length of 3.701", and Insulation Resistance of 1000000000000 ohm. Ideal for board connections in applications requiring high durability, it features a PCB Contact Row Spacing of 2.54mm, UL Flammability Code of 94V-0, and Rated Current - Signal at 2A.
B10B-PHDSS(LF)(SN)
J S T Mfg
B10B-PHDSS(LF)(SN) by J S T Mfg is a 2-row BOARD CONNECTOR with 10 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 800VAC, it is ideal for applications requiring reliable board-to-board connections in electronics.
B3B-EH-A(LF)(SN)
B3B-EH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3 contacts, 0.098" pitch, and 0.394" body length. It features Tin/Copper termination for soldering applications. Ideal for use in electronic devices requiring reliable male connectors on circuit boards.
52207-1160
The Molex 52207-1160 is a FFC/FPC connector with 11 contacts, mating pitch of 0.039", and tin termination finish. It operates b/w -30 to 85°C, suitable for board mounting in applications requiring a right angle receptacle design.
TSW-106-17-T-S
Samtec
Samtec TSW-106-17-T-S is a 6-contact board connector with 0.1" pitch, ideal for commercial applications. Featuring tin contact finish and polybutylene terephthalate insulator, it operates b/w -55°C to 105°C. With a rectangular PCB pattern and solder termination, this male connector offers reliable performance in various electronic devices.
22-23-2081
The Molex 22-23-2081 is a board connector with 8 contacts, featuring a mating contact pitch of 0.1" and insulation resistance of 1Gohm. It has a body length of 0.794", body width of 0.25", and insulator material made from polyamide. This connector is commonly used in commercial applications requiring reliable connections on PCBs.
M80-5401042
M80-5401042 by Harwin PLC is a 10-contact board connector with 0.079" mating contact pitch, suitable for PCB mounting with a temperature range of -55 to 125°C. Featuring tin finish contacts and glass-filled polyphenylene sulfide insulator, it offers high durability with 500 cycles and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable right-angle mounting in black color housing.
MTSW-102-07-G-S-240
Samtec's MTSW-102-07-G-S-240 is a board stacking connector with 0.1" pitch, gold-plated contacts, and glass-filled polyester insulator. Ideal for commercial applications, it features 2.54mm terminal pitch, solder termination, and male contact gender for reliable PCB connections.
DF11-18DS-2C
DF11-18DS-2C by Hirose Electric is a 2-row board connector with 18 contacts, rated at 2A signal current. It features a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for commercial applications requiring durable connectors with crimp termination and black insulator color.
FTSH-110-01-L-DV-K-A-P
Samtec's FTSH-110-01-L-DV-K-A-P is a 2-row, 20-contact board connector with a contact pitch of 1.27mm. It features gold mating contacts over nickel, suitable for commercial applications with an operating temperature range from -55 to 125°C. The connector has a straight mounting style and uses liquid crystal polymer insulator material.
1658621-1
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Mating Contact Finish: GOLD (15) OVER NICKEL (50)/GOLD FLASH (15) OVER PALLADIUM NICKEL (15); Filter Feature: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BM06B-SRSS-TB(LF)(SN)
BM06B-SRSS-TB(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.039" pitch, 100M ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCB applications requiring male SQ PIN-SKT contacts in a polarized housing with surface mount termination.
BM06B-GHS-TBT(LF)(SN)(N)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Terminal Pitch (mm): 1.25;
BM06B-SRSS-TBT(LF)(SN)
BM06B-SRSS-TBT(LF)(SN) by J S T Mfg is a 6-contact board connector with copper alloy contacts and tin over copper finish. It is a straight mounting style, surface mount termination type suitable for applications requiring UL 94V-0 flammability code compliance in headers & edge type connectors.
BM06B-GHS-TBT
BM06B-GHS-TBT by J S T Mfg is a 6-contact BOARD CONNECTOR with Tin (Sn) finish. It features PHOSPHOR BRONZE contacts, 1.25mm pitch, and UL 94V-0 flammability rating. Ideal for surface mount applications in electronics for reliable male contact connections.
BM06B-PASS-1-TFT(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 800VAC; No. of Connectors: ONE; JESD-609 Code: e3;
BM06B-SURS-TF(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Mixed Contacts: NO; Terminal Pitch (mm): .8;
BM06B-SRSS-TB
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn); Mounting Style: STRAIGHT;
BM06B-PASS-TFT(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 800VAC; No. of Connectors: ONE; Minimum Operating Temperature: -25 Cel;
BM06B-NSHSS-TBT(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e3; MIL Conformity: NO; Manufacturer Series: NSH;
BM06B-GHS-GB-TBT(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Additional Features: TOP ENTRY TYPE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved