Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
B10B-PASK-1(LF)(SN) by J S T Mfg is a 10-contact board connector with 0.079" pitch, 800VAC dielectric voltage, and 3A signal current rating. Ideal for PCB applications requiring male contacts, solder termination, and UL certification.
Median Price
$0.422
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.510
100+ parts
$0.371
1k+ parts
$0.315
10k+ parts
$0.272
Arrow
$0.514
$0.331
-
Verical
$0.332
RS (Exports)
$0.780
$0.720
Chip1Stop
$0.254
$0.253
Future Electronics
$0.335
$0.320
$0.300
Sensible Micro Corp
ComSIT Distribution GmbH
IBS Electronics
$0.472
$0.409
$0.423
NAC Semi
$0.670
VNN
LIBRA Elektronik GmbH
Nova Conductors
Prism Electronics
Corohmni
$1.086
Perfect Parts
Authorized Procurement Solutions
EMSNET (Excess)
GreenTree Electronics
Kepictronics
Argo Parts USA
Continental Prestige Electronics
Futuretech Components
Aranea Global
The small contact pitch allows for a high density of connections, making this product suitable for applications where space is limited.
High insulation resistance ensures there is minimal leakage of current between contacts, enhancing the overall reliability of the product.
The high dielectric voltage rating ensures the connector can handle high voltage applications safely.
The high rated current allows for reliable signal transmission without the risk of overheating or damaging the connector.
The UL 94V-0 flammability rating indicates that the connector is highly flame resistant, providing added safety in case of a fire.
Headers & Edge Type Connectors B10B-PASK-1(LF)(SN) attributes and parameters. Explore more Headers & Edge Type Connectors devices from J S T Mfg
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
B10B-PASK-1(LF)(SN) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Renesas Electronics
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Bytesonic Electronics
Shandong Yiguang Electronic Joint Stock
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Continental Device India
1473005-1
TE Connectivity
TE Connectivity's 1473005-1 is a CARD EDGE CONNECTOR with 200 contacts, POLYETHYLENE insulator, and 0.024" mating contact pitch. Ideal for board mounting applications, it offers a durability of 25 cycles and operates b/w -55°C to 85°C.
S2B-XH-A(LF)(SN)
J S T Mfg
S2B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. Ideal for applications requiring a right angle mounting style, this connector features tin over copper termination finish and polyamide66 insulator material.
70107-0002
Molex
Molex 70107-0002 is a board connector with 0.1" pitch, GLASS FILLED POLYESTER insulator, and -40 to 105°C operating range. Ideal for cable mounting applications requiring a polarized rib key, UL94V-0 flammability rating, and SQ PIN-SKT male contacts.
70553-0003
Molex 70553-0003 is a board connector with 0.1" pitch, suitable for commercial applications. Features include tin finish, phosphor bronze contacts, and UL94V-0 rated insulator in black color. Ideal for PCB mounting with right angle style and solder termination.
1410186-1
TE Connectivity 1410186-1 is a BOARD CONNECTOR with 72 contacts, 9 rows, and 0.071" contact pitch. It has LIQUID CRYSTAL POLYMER insulator for -55 to 105 °C operation. Ideal for applications requiring FEMALE connectors with SOLDER termination in a STRAIGHT mounting style.
FTSH-105-01-F-D-K
Samtec
Samtec's FTSH-105-01-F-D-K is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
FTSH-105-01-L-DV-K
Samtec's FTSH-105-01-L-DV-K is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, straight-mount male connector with surface mount termination.
35362-0250
Molex 35362-0250 is a board connector with 2 contacts, featuring TIN COPPER finish. It has a mating contact pitch of 0.079" and body dimensions of 0.303" x 0.217" x 0.335". Ideal for commercial applications requiring reliable rectangular PCB contact patterns and solder termination.
1-2199230-4
TE Connectivity 1-2199230-4, a card edge connector with 67 contacts, features 0.5A signal current rating. With POLYETHYLENE insulator and UL94V-0 flammability code, it operates b/w -40 to 80°C. Ideal for board mounting applications with right-angle mounting style.
14-56-4045
The Molex 14-56-4045 is a board connector with 0.1" mating contact pitch, gold termination finish, and 600VAC dielectric voltage. Ideal for commercial applications, it has a black insulator color, UL flammability rating of 94V-0, and operates b/w -40 to 120°C.
22-23-2061
The Molex 22-23-2061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring a reliable connection with solder termination and rectangular contact pattern.
746-068-520-601
Edac
Edac 746-068-520-601 is a 68-contact card edge connector with 0.125" pitch, suitable for PCB mounting. It features a dielectric voltage of 1500VAC, insulation resistance of 5Gohm, and operating temperatures from -40 to 105°C. Ideal for applications requiring high current signal transmission in black insulator color with UL94V-0 flammability rating.
50-37-5023
The Molex 50-37-5023 is a board connector with a mating contact pitch of 0.098". It features an insulation resistance of 1G ohm and can withstand up to 1000VAC. This dual-polarized connector, suitable for commercial applications, has a rated current of 3A and operates b/w -40°C to 105°C.
SSM-116-L-SV
SSM-116-L-SV by Samtec is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 5G ohm. It is commonly used in applications requiring high temperature resistance and surface mount termination.
DM3AT-SF-PEJM5(40)
Hirose Electric
The Hirose Electric DM3AT-SF-PEJM5(40) is a PCB connector with 0.043" mating contact pitch, GOLD finish, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features a liquid crystal polymer insulator, operates b/w -25 to 85 °C, and offers durability of 10000 cycles.
VHR-2N-R
BOARD CONNECTOR;
B13B-PH-K-S(LF)(SN)
B13B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 1.098" length, and 800VAC dielectric voltage. Ideal for applications requiring male connectors with 2A signal current, operating b/w -25°C to 85°C.
1658621-1
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Mating Contact Finish: GOLD (15) OVER NICKEL (50)/GOLD FLASH (15) OVER PALLADIUM NICKEL (15); Filter Feature: NO;
3220-10-0300-00-TR
Cnc Tech
3220-10-0300-00-TR by Cnc Tech is a BOARD CONNECTOR with 2 rows, 10 contacts, and BRASS material. It features Gold (Au) termination with Nickel (Ni) barrier for durability. Ideal for surface mount applications in electronics requiring high-quality male connectors.
22-29-2041
The Molex 22-29-2041 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a dielectric voltage of 1500VAC and insulation resistance of 5000000000 ohm. With a rated current of 2.5A, this connector has a red insulator color and uses matte tin over nickel termination finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B10B-PHDSS(LF)(SN)
B10B-PHDSS(LF)(SN) by J S T Mfg is a 2-row BOARD CONNECTOR with 10 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 800VAC, it is ideal for applications requiring reliable board-to-board connections in electronics.
B10B-PH-K-S(LF)(SN)
B10B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 10 contacts, 0.079" pitch, and 2A signal rating. It features POLYAMIDE66 insulation, 800VAC dielectric voltage, and -25 to 85°C operating range. Ideal for board mounting applications requiring reliable male connectors with press fit termination.
B10B-PUDSS-1(LF)(SN)
B10B-PUDSS-1(LF)(SN) by J S T Mfg is a 10-contact board connector with TIN termination finish. It features copper alloy contacts, UL 94V-0 flammability rating, and solder termination type. Ideal for applications requiring male connectors with 2mm terminal pitch on straight mounting style boards.
B10B-PH-SM4-TB(LF)(SN)
B10B-PH-SM4-TB(LF)(SN) by J S T Mfg is a 10-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C and insulation resistance of 1Gohm. It features tin over copper termination, POLYAMIDE66 insulator material, and UL94V-0 flammability rating, making it ideal for PCB connections in electronics.
B10B-XH-A(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Tin (Sn) over Copper (Cu); Mounting Style: STRAIGHT; Mounting Type: BOARD;
B10B-PUDSS-1
B10B-PUDSS-1 by J S T Mfg is a BOARD CONNECTOR with 10 contacts, made of COPPER ALLOY with Tin (Sn) finish. It has a terminal pitch of 2mm and UL Flammability Code of 94V-0. Ideal for board mounting applications requiring reliable male connectors.
B10B-ZR-SM4-TFT(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Contact Material: BRASS; IEC Conformity: NO;
B10B-PH-SM4-TBT(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Termination Contact Finish: TIN; Contact Material: COPPER ALLOY;
B10B-ZR-SM4-TF(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Terminal Pitch (mm): 1.5; Additional Features: SHROUDED, TOP ENTRY; MIL Conformity: NO;
B10B-PHDSS-B(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN; Mating Contact Finish: TIN OVER COPPER; Contact Material: COPPER ALLOY;
B10B-XH-AM(LF)(SN)
B10B-XH-AM(LF)(SN) by J S T Mfg is a 10-contact BOARD CONNECTOR with BRASS contacts and TIN finish. Featuring a 2.5mm terminal pitch, it is ideal for board mounting applications requiring a male connector with straight mounting style.
B10B-PHDSS
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Additional Features: TOP ENTRY, LOW PROFILE; DIN Conformance: NO;
B10B-PADSS-1F(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN; No. of Rows Loaded: 2; JESD-609 Code: e3;
B10B-ZR-SM4-TF(LF)(SN)(P)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: TIN; Mixed Contacts: NO; Mounting Type: BOARD;
B10B-XADSS-N(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: TOP ENTRY, SHROUDED, POLARIZED; No. of Rows Loaded: 2; Mounting Style: STRAIGHT;
B10B-ZR(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Mounting Style: STRAIGHT;
B10B-XASK-1-A(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; MIL Conformity: NO; Terminal Pitch (mm): 2.5;
B10B-EH-A(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Termination Contact Finish: Tin (Sn) - reflowed; MIL Conformity: NO;
B10B-XH-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Terminal Pitch (mm): 2.5; Mounting Type: BOARD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved