Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
B04B-PNISK-1A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, made of COPPER ALLOY. It has a terminal pitch of 2mm and uses Tin (Sn) for termination. Ideal for applications requiring straight male connectors on circuit boards.
Median Price
$0.264
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.360
100+ parts
$0.258
1k+ parts
$0.216
10k+ parts
$0.184
Future Electronics
-
$0.169
$0.158
Chip Stock
NexGen Digital
VNN
Nova Conductors
Ampacity Inc.
$0.150
Modulus Dynamics
$7.075
Aztec Data Supply Inc.
$7.370
Corohmni
$10.210
EMSNET (Excess)
Continental Prestige Electronics
Kepictronics
Argo Parts USA
Aranea Global
The tin finish helps prevent oxidation and ensures a good electrical connection, making this product a reliable choice for long-term use.
This type of connector is commonly used for efficient and secure connections on circuit boards, making it a suitable choice for electronic applications.
Copper alloy provides good conductivity and durability, ensuring stable performance and longevity of the product.
This code indicates that the product has a high level of flame resistance, making it a safe choice for use in various environments.
Having 4 contacts allows for multiple connections to be made, providing versatility and flexibility in device configurations.
Being designed for board mounting simplifies installation and ensures a secure attachment, making it convenient and reliable for use.
A pitch of 2mm provides a suitable spacing for the contacts, enabling easy mating and ensuring proper alignment for stable connections.
Solder termination offers a strong and reliable connection, ensuring signal integrity and mechanical stability for the product.
Male contacts are commonly used for providing a secure and reliable connection with female connectors, making them a standard choice for many applications.
The straight mounting style allows for easy and simple installation, providing a clean and organized look to the overall setup.
Headers & Edge Type Connectors B04B-PNISK-1A(LF)(SN) attributes and parameters. Explore more Headers & Edge Type Connectors devices from J S T Mfg
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
B04B-PNISK-1A(LF)(SN) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Harris Semiconductor
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
Diodes Incorporated
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
NSHR-03V-S
J S T Mfg
NSHR-03V-S by J S T Mfg is a 3-contact BOARD CONNECTOR with TIN finish, ideal for CABLE mounting. Made of COPPER ALLOY, it has UL 94V-0 flammability rating and features FEMALE contacts suitable for CRIMP termination.
S4B-XH-SM4-TB(LF)(SN)
S4B-XH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2.5mm and is ideal for surface mount applications in electronics for right angle mounting on boards.
1-1473005-4
TE Connectivity
TE Connectivity 1-1473005-4 is a CARD EDGE CONNECTOR with 200 contacts, 0.024" pitch, and 50000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings due to its durability, right angle mounting style, and female contact gender.
B8B-PH-SM4-TB(LF)(SN)
B8B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 8 contacts, made of COPPER ALLOY. It features Tin/Copper (Sn/Cu) termination finish and has a terminal pitch of 2mm. Ideal for surface mount applications in headers & edge type connectors.
B4B-PH-K-S(LF)(SN)
B4B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. It has POLYAMIDE66 insulator material and BRASS contact material. Ideal for applications requiring a male SQ PIN-SKT contact style on a RECTANGULAR PCB pattern.
35362-0350
Molex
Molex 35362-0350 is a board connector with 3 contacts, featuring a mating contact pitch of 0.079" and body dimensions of 0.382" x 0.217" x 0.335". It uses TIN over copper termination for reliability in commercial applications.
746-016-520-606
Edac
Edac 746-016-520-606 is a 16-contact card edge connector with 0.125" pitch, suitable for PCB mounting. Featuring 3A signal current rating, it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for applications requiring high insulation resistance and UL94V-0 flammability compliance.
B03B-PASK-1(LF)(SN)
B03B-PASK-1(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3A signal current rating, 0.079" contact pitch, and 800VAC dielectric voltage. Ideal for board mounting applications, it features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and tin over copper mating finish. Operating b/w -25 to 85 °C, this UL-rated connector offers high insulation resistance of 1000000000 ohm.
61306421021
Wuerth Elektronik & Kg
Wurth Elektronik 61306421021 is a 64-contact board connector with 0.1" pitch, suitable for commercial applications. It features gold over nickel termination, polybutylene terephthalate insulator, and operates b/w -40 to 125°C. Ideal for PCBs requiring reliable signal transmission at up to 3A current rating.
B04B-PASK-1
B04B-PASK-1 by J S T Mfg is a 4-contact male board connector with tin/lead finish, copper alloy contacts, and UL 94V-0 flammability rating. It has a terminal pitch of 2mm and solder termination, suitable for various applications requiring reliable board-to-board connections in electronic devices.
66506-354
Berg Electronics
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 40; Mounting Type: BOARD; Mixed Contacts: NO;
357-074-422-278
Edac 357-074-422-278 is a Card Edge Connector with 74 contacts, 0.156" pitch, and 5A signal rating. It has a dielectric voltage of 2545VAC and operates b/w -40 to 105°C. Ideal for board and panel mounting applications requiring high insulation resistance and UL certification.
VHR-2N-BL
BOARD CONNECTOR;
M22-2521005
Harwin Plc
The Harwin PLC M22-2521005 is a 20-contact male board connector with gold finish, suitable for commercial applications. Featuring a mating contact pitch of 0.079", insulation resistance of 100M ohm, and operating temperature range from -55 to 105°C, it offers reliable connectivity in various electronic devices. Ideal for PCB mounting with a terminal pitch of 2mm, this durable connector has a UL flammability rating of 94V-0.
35362-0250
Molex 35362-0250 is a board connector with 2 contacts, featuring TIN COPPER finish. It has a mating contact pitch of 0.079" and body dimensions of 0.303" x 0.217" x 0.335". Ideal for commercial applications requiring reliable rectangular PCB contact patterns and solder termination.
SQT-120-01-F-D
Samtec
SQT-120-01-F-D by Samtec is a 40-contact board connector with a contact pitch of 0.079". It features a matte tin finish, liquid crystal polymer insulator, and gold flash over nickel mating contacts. Ideal for applications requiring high durability and reliability in commercial settings.
826629-2
TE Connectivity 826629-2 is a board connector with 0.1" pitch, suitable for commercial applications. It features tin finish, 5A signal current rating, and operates b/w -65 to 105°C. Ideal for use in electronics requiring a male square pin socket contact style on a rectangular PCB pattern.
22-03-2021
Molex 22-03-2021 is a board connector with mating contact pitch of 0.1", insulation resistance of 50000000000 ohm, and dielectric voltage of 1500VAC. It has a male contact gender, rated current of 4A for signal transmission, and is suitable for commercial applications requiring durable connections on PCBs.
351-10-139-00-004101
Preci-dip Sa
351-10-139-00-004101 by Preci-dip Sa is a BOARD CONNECTOR with GOLD contact finish. Featuring 39 contacts on a 2.54mm pitch, it is ideal for board mounting applications requiring male BRASS contacts. With UL Flammability Code of 94V-0, this STRAIGHT mounting style connector ensures reliable solder termination.
DF11-10DP-2DSA(24)
Hirose Electric
DF11-10DP-2DSA(24) by Hirose Electric is a 10-contact, 2-row board connector with 0.079" pitch and 650VAC dielectric voltage. It features POLYAMIDE insulation, TIN finish, and operates b/w -30 to 85°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL certification.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B04B-PASK-1(LF)(SN)
B04B-PASK-1(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C. Featuring tin finish contacts and UL-rated insulation material, it offers high insulation resistance of 1000000000 ohm and dielectric voltage withstand of 800VAC. Ideal for PCB mounting with solder termination, this male connector has a contact resistance of 20 mohm and can handle up to 3A signal current.
B04B-PASK(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 800VAC; No. of Connectors: ONE; IEC Conformity: NO;
B04B-XASK-1(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE; No. of Rows Loaded: 1;
B04B-XASK-1-A(LF)(SN)
B04B-XASK-1-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, made of COPPER ALLOY. It has a terminal pitch of 2.5mm and uses Tin (Sn) over Copper (Cu) for termination. Ideal for applications requiring reliable connections in electronic devices.
B04B-XASK-1-A
B04B-XASK-1-A by J S T Mfg is a BOARD CONNECTOR with 4 contacts, made of COPPER ALLOY. It has a terminal pitch of 2.5mm and uses TIN for termination contact finish. Ideal for applications requiring reliable male connectors in headers & edge type connectors.
B04B-PASK
B04B-PASK by J S T Mfg is a 4-contact male board connector with tin/lead finish. It has a terminal pitch of 2mm and UL94V-0 flammability rating. Ideal for straight mounting on boards, it suits applications requiring reliable soldered connections in headers & edge type connectors.
B04B-XASK-1N-A(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Mounting Style: STRAIGHT; JESD-609 Code: e3;
B04B-ZESK-1D(T)(LF)(SN)(N)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Filter Feature: NO; MIL Conformity: NO;
B04B-XASK-1N(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: TIN OVER COPPER; Mounting Style: STRAIGHT; Total No. of Contacts: 4;
B04B-J21SK-GGXR(LF)(AU)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 4; Terminal Pitch (mm): 2.5; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier;
B04B-PNISK-1(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Filter Feature: NO; IEC Conformity: NO;
B04B-PNISK-1A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; UL Flammability Code: 94V-0; Additional Features: SHROUDED;
B04B-PNISK-1
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; MIL Conformity: NO; Mating Contact Finish: TIN OVER COPPER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved