Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADC, DUAL-SLOPE; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE;
Median Price
$5.880
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
$4.400
1k+ parts
$3.650
10k+ parts
$3.250
Renesas
$6.130
$4.584
$3.477
$3.348
Verical
-
$4.380
$3.860
Nova Conductors
$4.040
Vyrian
Ampacity Inc.
$2.640
Semicontronic
$2.574
$2.561
Vigor
$3.590
Argo Parts USA
$3.980
Continental Prestige Electronics
$3.900
Advanced Electronics
$12.885
$12.241
Aztec Data Supply Inc.
$15.012
Corohmni
$26.897
Microchip USA
$27.680
$27.510
$27.420
$27.340
QUARKTWIN TECHNOLOGY LTD
Netroflash
$3.959
$3.838
$3.757
Supply Digital
Analog-to-Digital Converters ICL7107CM44ZT attributes and parameters. Explore more Analog-to-Digital Converters devices from Intersil
Converter Type:
No. of Analog In Channels:
No. of Functions:
No. of Bits:
Sub-Category:
Output Bit Code:
Output Format:
Maximum Linearity Error (EL):
Power Supplies:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Nominal Supply Voltage:
Nominal Negative Supply Voltage:
Moisture Sensitivity Level (MSL):
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Peak Reflow Temperature:
Maximum Time At Peak Reflow Temperature:
Terminal Position:
No. of Terminals:
Terminal Form:
Terminal Pitch:
Surface Mount:
Width:
Length:
Maximum Seated Height:
Package Body Material:
Package Style:
Package Shape:
Package Equivalence Code:
Package Code:
JESD-30 Code:
Qualified:
JESD-609 Code:
ICL7107CM44ZT Converters trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Label Change-All Devices 01/Dec/2022
Japanese semiconductor company Renesas acquired Intersil on February 24, 2017. Intersil Corporation (NASDAQ:ISIL), a wholly owned subsidiary of Renesas Electronics Corporation, is a leading provider of innovative power management and precision analog solutions. The company's products form the building blocks of increasingly intelligent, mobile and power hungry electronics enabling advances in power management to improve efficiency and extend battery life. With a deep portfolio of intellectual property and a rich history of design and process innovation, Intersil is the trusted partner to leading companies in some of the world's largest markets, including the industrial and infrastructure, mobile computing, automotive and aerospace.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
Central Semiconductor
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ICL7107CPLZ
Intersil
ADC, DUAL-SLOPE; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
ADS7828EB/250G4
Texas Instruments ADS7828EB/250G4 is a 12-bit ADC with 8 analog in channels, 0.0244% EL, and 0.05 MHz sample rate. Ideal for industrial applications, it operates at -40 to 85°C with a supply voltage of 2.7-5V. Package style: SOIC, THIN PROFILE, SHRINK PITCH.
LTC1867IGN#WPBF
Analog Devices
LTC1867IGN#WPBF by Analog Devices is a 16-bit ADC with 8 analog in channels, 0.0061% max linearity error, and 0.2 MHz sample rate. Ideal for industrial applications, it operates b/w -40 to 85°C, with a small outline package style and 3.5 us conversion time.
AD7192BRUZ
AD7192BRUZ by Analog Devices is a 24-bit ADC with 6 analog in channels, 0.0015% max linearity error, and 3/5V power supplies. Ideal for industrial applications requiring high precision data conversion at temperatures ranging from -40 to 105°C. This small outline converter features a serial output format and operates at a sample rate of 0.0048 MHz.
MAX11645EUA+
Maxim Integrated
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
LTC2433-1IMS#PBF
Linear Technology
ADC, DELTA-SIGMA; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
ADS124S08IPBS
Texas Instruments' ADS124S08IPBS is a 24-bit ADC with 12 analog in channels, operating from -50 to 125°C. It features a serial output format, quad terminal position, and automotive temperature grade suitability. Ideal for applications requiring precise analog-to-digital conversion in compact spaces.
ADS1255IDBTG4
Texas Instruments ADS1255IDBTG4 is a 24-bit ADC with 0.001% EL, 2 analog in channels, and 0.03 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package.
AD7732BRUZ-REEL7
AD7732BRUZ-REEL7 by Analog Devices is a 24-bit ADC with 2 analog in channels, 0.003% EL, and 82.034us conversion time. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package with dual terminals and serial output format.
MCP3221A5T-I/OT
Microchip Technology
MCP3221A5T-I/OT by Microchip is a 12-bit ADC with 1 analog input channel, operating at 3/5V. It features 0.0488% max linearity error and 0.0223 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in compact designs.
AD7995YRJZ-0500RL7
AD7995YRJZ-0500RL7 by Analog Devices is a 10-bit ADC with 4 analog in channels. It operates at -40 to 125 °C and has a linearity error of 0.0391%. Suitable for automotive applications, it features a small outline package with dual terminal position and serial output format.
LTC2420CS8#PBF
LTC2420CS8#PBF by Analog Devices is a 20-bit ADC with 0.1375% linearity error, ideal for commercial applications. It operates at 0-70°C, has a 3.3V supply voltage, and outputs data in binary format via serial communication. The small outline package with dual terminals makes it suitable for space-constrained designs requiring precise analog-to-digital conversion.
LTC1857IG#TRPBF
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
MCP3008T-I/SL
Telcom Semiconductor
Analog to Digital Converters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
ADS8320E/250
Texas Instruments' ADS8320E/250 is a 16-bit ADC with 0.018% EL, 3/5V supplies, and 0.1MHz sample rate. Ideal for industrial applications, it features a small outline package with dual terminals and GULL WING form. Operating from -40 to 85°C, this CMOS converter offers precise analog-to-digital conversion in a compact design.
ADS1114BQDGSRQ1
ADS1114BQDGSRQ1 by Texas Instruments is a 16-bit ADC with 0.0015% linearity error, ideal for automotive applications. It operates at -40 to 125°C, with a supply voltage of 2-3.3V and max analog input voltage of 6.144V. This small-outline converter has a sample rate of 0.00086 MHz and outputs data in serial format.
ADC128S102CIMTX
National Semiconductor
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
ADS1258IRTCTG4
ADS1258IRTCTG4 by Texas Instruments is a 24-bit ADC with 16 analog input channels, 0.001% linearity error, and 0.125 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact chip carrier package.
LTC1867LIGN#PBF
LTC1867LIGN#PBF by Analog Devices is a 16-bit ADC with 8 analog input channels, 0.0061% linearity error, and 0.175 MHz sample rate. It is used in industrial applications for precise analog-to-digital conversion in a compact package with small outline and shrink pitch design.
AD7894ARZ-10REEL
AD7894ARZ-10REEL by Analog Devices is a 14-bit ADC with 5V supply, 87.5 MHz sample rate, and 0.0122% linearity error. It is ideal for industrial applications requiring high-speed data conversion in a compact package. With a small outline design and serial output format, it offers precise analog-to-digital conversion for various electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ICL7107CPL
Thomson Consumer Electronics
ADC, PROPRIETARY METHOD; Nominal Negative Supply Voltage: -5 V; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel; No. of Functions: 1; Maximum Supply Current: 1.8 mA;
General Electric Solid State
ICL7107CPL+
Harris Semiconductor
ICL7107CPL by Maxim Integrated is a 23-bit ADC with 0% linearity error, operating at +-5V. This CMOS technology converter has a dual-slope design and outputs in binary format. It is commonly used in commercial applications requiring precise analog-to-digital conversion within a temperature range of 0-70°C.
Analog Devices' ICL7107CPL+ is a 23-bit ADC with 0% linearity error, ideal for commercial applications. It operates on +-5V supplies, CMOS technology, and dual-slope conversion type. With a rectangular package style and through-hole terminal form, it offers parallel word output at 5V nominal voltage.
ICL7107CM44Z
ICL7136CM44ZT
Renesas Electronics
Renesas Electronics' ICL7136CM44ZT is a 44-terminal ADC with CMOS technology, operating b/w 0-70°C. It features dual-slope conversion, binary output code, and parallel word format. Ideal for commercial applications requiring a 9V supply voltage in a compact square flatpack package.
ICL7135CPIZ
ADC, DUAL-SLOPE; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR;
Renesas Electronics' ICL7135CPIZ is a 4-bit ADC with 6.25% EL, ideal for commercial applications. It features a rectangular PLASTIC/EPOXY package style, IN-LINE meter shape, and operates b/w 0-70°C. With BCD output format and dual-slope technology, it's suitable for various analog-to-digital conversion needs.
ICL7136CM44Z
Renesas Electronics ICL7136CM44Z is a 44-terminal ADC with CMOS technology, operating at -40 to 70°C. It features dual-slope conversion, 9V supply voltage, and binary output code. Ideal for applications requiring high-precision analog-to-digital conversion in commercial temperature environments.
ICL7106CPLZ
ICL7136CPLZ
Renesas Electronics' ICL7136CPLZ is a 40-terminal ADC with CMOS technology, operating b/w 0-70°C. It features a dual-slope converter type, 9V supply voltage, and binary output code. Widely used in applications requiring precise analog-to-digital conversion in commercial temperature environments.
ICL7107CPL+3
A/D CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
ICL7107CM44T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved