Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 26; Package Code: QCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$3.645
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$3.240
1k+ parts
$2.900
10k+ parts
$2.730
Verical
$4.050
$3.625
$3.413
DF Sales Co.
$2.000
Nova Conductors
$3.521
Maritex
$5.230
Martec Srl
Chip Stock
Sensible Micro Corp
Bristol Electronics
Classic Components Corporation
Conversion2
Digiode
Vyrian
Ampacity Inc.
$3.500
Continental Prestige Electronics
$3.451
Argo Parts USA
Netroflash
$3.345
$3.275
Modulus Dynamics
$3.380
$3.239
Corohmni
Semicontronic
$6.500
$6.338
$6.305
AZTECH Wire
$13.552
Aztec Data Supply Inc.
$19.310
Component Stockers USA
$99.990
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
A-Z Elektronik GmbH
RC Electronics
$3.590
$3.280
$3.180
Kepictronics
Alle Elektronik GmbH
Futuretech Components
Metaverse IC Inc.
Lixinc
Assy Fe
Corphita
Microchip USA
Speed Components Ltd (Excess)
Authorized Procurement Solutions
Switching Regulators & Controllers IR3846MTRPBF attributes and parameters. Explore more Switching Regulators & Controllers devices from International Rectifier
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
IR3846MTRPBF Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
LM2594HVMX-ADJ/NOPB
LM2594HVMX-ADJ/NOPB by Texas Instruments is a switching regulator with a voltage-mode control technique, operating b/w -40 to 125°C. It offers a max output current of 0.5A and supports input voltages from 4.5V to 60V, making it ideal for automotive applications requiring efficient power management in compact spaces.
LM5008ASDX/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SON; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: SOLCC8,.15,32;
LM5118MHX/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2674M-5.0/NOPB
LM2674M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V, suitable for automotive applications. Operating b/w -40°C to 125°C, it has a small outline package style and offers a wide input voltage range from 6.5V to 40V, making it ideal for various power supply designs.
UCC28950QPWRQ1
UCC28950QPWRQ1 by Texas Instruments is a switching controller with current-mode control technique, operating at -40 to 125°C. It features a 12V nominal input/output voltage and supports a max switching frequency of 1000 kHz. Ideal for automotive applications due to AEC-Q100 screening level and compact design in small outline package.
TPS63030DSKR
TPS63030DSKR by Texas Instruments is a switching regulator with a max output voltage of 5.5V and max output current of 0.4A, suitable for automotive applications. It operates b/w -40 to 125°C, with a control mode of current-mode PWM and a compact square package style measuring 2.5mm x 2.5mm x 0.8mm.
LM25011AQ1MY/NOPB
LM25011AQ1MY/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage, 2A max output current, and 2000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.
LM2596DSADJG
Onsemi
LM2596DSADJG by Onsemi is a 5-terminal switching regulator with voltage-mode control. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 7.5A and a buck switcher configuration, it supports input voltages from 4.5V to 40V, making it ideal for various power supply designs.
LMZ14203EXTTZ/NOPB
LMZ14203EXTTZ/NOPB by Texas Instruments is a switching regulator with 3A output current, 6V max output voltage, and 1000 kHz max switching frequency. Ideal for military applications due to its MIL-TEMP grade, it operates b/w -55°C to 125°C and has a compact package style suitable for space-constrained designs.
MC33063ADRJR
MC33063ADRJR by Texas Instruments is a switching regulator with VOLTAGE-MODE control, operating at -40 to 85 °C. It has a max output voltage of 40V and can handle up to 1.5A output current. Ideal for industrial applications requiring efficient buck-boost configurations in compact designs.
LMZ34002RKGT
LMZ34002RKGT by Texas Instruments is a voltage-mode switching regulator with a max output current of 2A and a max switching frequency of 900kHz. It operates in industrial temperature grade range (-40 to 85°C) and is suitable for applications requiring a compact rectangular package with surface mount capability.
LM2664M6/NOPB
SWITCHED CAPACITOR CONVERTER; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AP64501SP-13
Diodes Incorporated
AP64501SP-13 by Diodes Inc. is a switching regulator with max output voltage of 40V, min input voltage of 3.8V, and max operating temp of 85°C. Ideal for industrial applications requiring pulse frequency modulation control technique in a small outline package style.
PLM5164QDDATQ1
PLM5164QDDATQ1 by Texas Instruments is a switching regulator with 8 terminals, operating at -40 to 150°C. It supports input voltage range of 6-100V and output voltage from 1.2-90V, delivering up to 1A current at a frequency of 1000kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LT8640EUDC#PBF
Analog Devices
Analog Devices' LT8640EUDC#PBF is a 12.5A switching regulator with a buck configuration, operating at up to 2150 kHz. It features a wide input voltage range of 3.4V to 42V and offers pulse width modulation control for automotive applications requiring high efficiency and precise current regulation.
TL494IN
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPSM828222SILR
TPSM828222SILR by Texas Instruments is a switching regulator with 2A output current and 1.8V nominal output voltage, suitable for automotive applications. It operates b/w -40 to 125°C, with a max switching frequency of 4000 kHz. This MICROELECTRONIC ASSEMBLY package has a compact size of 2.5mm x 2mm x 1.1mm, making it ideal for space-constrained designs.
LM22675MR-5.0/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-PDSO-G8;
LMZM23601V5SILR
LMZM23601V5SILR by Texas Instruments is a switching regulator with 1A output current, 1100kHz max switching frequency, and 5V nominal output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact rectangular package style. Suitable for various power management needs in automotive electronics.
LTM4607IV#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 141; Package Code: LGA; Package Shape: SQUARE; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IR3870MTR1PBF
International Rectifier
IR3870MTR1PBF by International Rectifier is a VOLTAGE-MODE switching regulator with 10A output current, 1000 kHz switching frequency, and BUCK switcher config. Ideal for applications requiring high efficiency power conversion in compact spaces due to its very thin profile chip carrier package style.
IR3841WMTR1PBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 15; Package Code: HQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
Infineon Technologies
IR3841WMTR1PBF by Infineon is a voltage-mode switching regulator with 8A output current, 1650kHz switching frequency, and -40 to 125°C operating temperature range. Ideal for automotive applications, this chip carrier package has 15 terminals and supports a buck switcher configuration.
IR38063MTRPBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 34; Package Code: HQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
IR38063MTRPBF by Infineon Technologies is a voltage-mode switching regulator with a max output current of 25A and a max switching frequency of 1650kHz. This chip carrier, heat sink/slug package style regulator operates in automotive temperature grades and is ideal for buck switcher configurations. With a wide input voltage range from 1.2V to 21V, it is suitable for various power management applications.
IR3820MTRPBF
IR3846MTRPBF
IR3847MTRPBF
SWITCHING REGULATOR; No. of Terminals: 32; Surface Mount: YES; Maximum Switching Frequency: 1650 kHz; Maximum Output Current: 25 A; Qualification: Not Qualified;
SWITCHING REGULATOR; No. of Terminals: 32; Surface Mount: YES; Package Equivalence Code: LCC33(UNSPEC); Maximum Output Current: 25 A; Package Body Material: PLASTIC/EPOXY;
IR3870MTRPBF
SWITCHING REGULATOR; No. of Terminals: 17; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES; Additional Features: ALSO OPERATES IN ADJUSTABLE MODE FROM 0.5V TO 12V; PWM CONTROL TECHNIQUE ALSO POSSIBLE;
SWITCHING REGULATOR; No. of Terminals: 17; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Input Voltage: 3 V;
IR3853MTRPBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 17; Package Code: HQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
IR3853MTRPBF by Infineon Technologies is a voltage-mode switching regulator with a max output current of 4A and a max switching frequency of 1650 kHz. It is designed for automotive applications, operates b/w -40 to 125 °C, and supports input voltages from 1.5V to 21V.
IR38064MTRPBF
IR38064MTRPBF by Infineon Technologies is a voltage-mode switching regulator with a max output current of 35A and a max switching frequency of 1650kHz. This rectangular package style IC is ideal for automotive applications, offering a wide operating temperature range from -40°C to 125°C. With 26 terminals and pulse width modulation control technique, it provides efficient power management in compact designs.
IR3827MTRPBF
SWITCHING REGULATOR; Package Code: QCCN; Surface Mount: YES; Control Mode: VOLTAGE-MODE; Maximum Output Current: 6 A; Package Style (Meter): CHIP CARRIER;
SWITCHING REGULATOR; Package Code: QCCN; Surface Mount: YES; Qualification: Not Qualified; Terminal Position: QUAD; Moisture Sensitivity Level (MSL): 2;
IR38064MTRPBF/SAMPLE
SWITCHING REGULATOR;
IR3898MTRPBF
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 17; Package Code: QCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved