Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
IPS7091GPBF by International Rectifier is a MOS technology peripheral driver with 8 terminals. It has built-in protections for transient, over current, and over voltage. With a max output current of 1.5A, it is ideal for automotive applications requiring sink flow direction.
Median Price
$7.330
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Nova Conductors
1+ parts
$3.303
100+ parts
-
1k+ parts
10k+ parts
DF Sales Co.
Chip Stock
Vyrian
Sensible Micro Corp
Bristol Electronics
Connector Distribution Corp
Right Parts Inc.
Atlantic Semiconductor
Argo Parts USA
Netroflash
$3.138
$3.072
Continental Prestige Electronics
$3.237
Corohmni
$7.812
AZTECH Wire
$9.000
$8.640
$8.470
$8.300
Aztec Data Supply Inc.
$10.260
Ampacity Inc.
$18.500
Semicontronic
$23.500
$22.912
$22.795
A-Z Elektronik GmbH
Alle Elektronik GmbH
Authorized Procurement Solutions
Glotronic Ltd.
Microchip USA
Kepictronics
This material provides durability and protection for the internal components of the peripheral driver.
Ease of installation on PCBs and space-saving design.
Ability to handle higher voltages, suitable for a variety of applications.
Ensures the peripheral driver and connected devices are safeguarded from potential damage.
Provides sufficient current for driving peripherals without overload.
Quick response time for activating connected peripherals.
Capable of operating in high-temperature environments, suitable for automotive applications.
Peripheral Drivers IPS7091GPBF attributes and parameters. Explore more Peripheral Drivers devices from International Rectifier
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Maximum Output Current:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
IPS7091GPBF Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
SPC TECHNOLOGY/ MULTICOMP
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Panjit International
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Silicon Standard
Diodes Incorporated
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
Promax-johnton
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
International Semiconductor
TLE6232GPAUMA2
Infineon Technologies
TLE6232GPAUMA2 by Infineon is a 36-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a supply voltage range of 4.5V to 5.5V and has a nominal output peak current limit of 4A. Ideal for applications requiring buffer or inverter based interface ICs with sink output current flow direction.
BTM7810KAUMA1
Infineon's BTM7810KAUMA1 is a half bridge peripheral driver with 2 functions, operating at 1.8-42V. It offers over/under voltage protection and thermal safeguards in a small outline package. Ideal for applications requiring source/sink current flow control with fast turn-on/off times.
BSP77E6433HUMA1
BSP77E6433HUMA1 by Infineon is a MOS technology-based peripheral driver with built-in protections for transient, over current, and over voltage. It operates at an industrial temperature grade range from -40 to 85°C, with a nominal voltage of 12V and output peak current limit of 2.8A. This rectangular-shaped device in small outline package is suitable for applications requiring sink output current flow direction.
TPS22916CLYFPT
TPS22916CLYFPT by Texas Instruments is a 4-terminal peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and operating temp range from -40 to 85°C. It features built-in transient protection and is ideal for industrial applications requiring buffer or inverter-based interface ICs.
MC33879APEK-R2
Freescale Semiconductor
MC33879APEK-R2 by Freescale is a peripheral driver with 32 terminals, operating at -40 to 125 °C. It offers built-in protections for transient, over current, and over voltage situations. Ideal for automotive applications due to its MOS technology and true output polarity.
E-L9338MD
STMicroelectronics
E-L9338MD by STMicroelectronics is a 4-function peripheral driver with built-in protections for transient, over current, and thermal issues. It operates within a supply voltage range of 4.5V to 32V and has a max output current of 0.3A. This small outline package driver is ideal for applications requiring sink output current flow direction in BCD technology environments.
BTS711L1XUMA1
BTS711L1XUMA1 by Infineon is a MOS technology peripheral driver with 4 functions, 20 terminals, and built-in protections. It operates at supply voltages b/w 5V to 34V and has a nominal output peak current limit of 4.4A. This small outline package is ideal for applications requiring source and sink output current flow direction control.
BSP75NTA
Zetex Plc
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Turn-off Time: 20 us;
BSP75GTA
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 40;
NUD3160LT1G
Onsemi
NUD3160LT1G by Onsemi is a peripheral driver with a max supply voltage of 60V and output current of 0.15A. It features built-in transient protections, operates in automotive temperature grades, and is ideal for buffer or inverter-based applications.
BTS441RG
BTS441RG by Infineon is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 4.75V to 43V and has a nominal output peak current limit of 21A. This rectangular package style device is ideal for automotive applications requiring a sink output current flow direction.
BTS432E2
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 44 A; No. of Functions: 1;
IMP803LG
Daily Silver Imp Microelectronics
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FPF2700MPX
FPF2700MPX by Onsemi is a peripheral driver with a supply voltage range of 2.8V to 36V, offering built-in protections against overcurrent, thermal issues, and undervoltage. This industrial-grade device has a compact square package style with 8 terminals and operates in temperatures ranging from -40°C to 85°C. It serves as an interface IC type for buffer or inverter-based applications requiring a max output peak current limit of 0.4A.
ISO1H816GAUMA1
Infineon's ISO1H816GAUMA1 is a 36-terminal peripheral driver with 1.2A output current, suitable for sink applications. It operates on power supplies of 3.3/5V and 15/30V, featuring a half-bridge interface IC type for driving various peripherals efficiently in electronic systems. The package style is small outline with gull wing terminals, making it ideal for compact designs requiring high peak current limits up to 4.4A.
IRS2183STRPBF
IRS2183STRPBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V. It is used in automotive applications and offers built-in protections against transients and under voltage. Its turn-on time is 0.27us and it has a nominal output peak current limit of 1.9A.
LTC4376HDHD#WTRPBF
Analog Devices
LTC4376HDHD#WTRPBF by Analog Devices is a CMOS technology-based peripheral driver with a supply voltage range of 4V to 40V. It features built-in transient protection and operates in automotive-grade temperatures from -40°C to 125°C. This small outline, heat sink package is ideal for buffer or inverter applications in automotive electronics.
MIC5801YWM-TR
Micrel
LATCH BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2004ANSRG4
ULN2004ANSRG4 by Texas Instruments is a 7-bit buffer/inverter-based peripheral driver with open-collector output. It operates b/w -20°C to 70°C, has a max supply voltage of 8V, and built-in transient protection. Ideal for applications requiring sink current flow direction in compact designs due to its small outline package style.
MAX845ESA+
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IPS7081RPBF
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 7 A; Moisture Sensitivity Level (MSL): 1;
IPS7091GTRPBF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Supply Voltage: 35 V;
IPS7091GPBF
International Rectifier Hirel Products
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Seated Height: 1.75 mm;
IPS7091PBF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Qualification: Not Qualified; Minimum Supply Voltage: 6 V;
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Driver No. of Bits: 1;
IPS7071GTRPBF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 1;
IPS7091STRPBF
Peripheral Drivers; No. of Terminals: 5; Package Equivalence Code: SMSIP5H,.6,67TB; Driver No. of Bits: 1; Qualification: Not Qualified; Power Supplies (V): 14;
IPS7091SPBF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Terminal Pitch: 1.7 mm; Technology: MOS;
IPS7091STRRPBF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Minimum Supply Voltage: 6 V;
IPS7071GPBF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Driver No. of Bits: 1;
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Built-in Protections: OVER CURRENT; THERMAL; TRANSIENT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved