Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AUIR3315STRR by International Rectifier is a 5-terminal peripheral driver with max supply voltage of 32V. It offers built-in protections for transient, over current, and over voltage. Widely used in automotive applications due to its small outline package style and source output current flow direction.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Nova Conductors
AZTECH Wire
$17.531
Ampacity Inc.
$28.500
Bastille Electronics
PLASTIC/EPOXY - Provides durability and protection for the internal components, making it suitable for various applications.
YES - Allows for easy and secure mounting on circuit boards, saving space and simplifying the assembly process.
32 V - Supports a wide range of voltage inputs, making it versatile and compatible with different power sources.
RECTANGULAR - Fits well in typical electronic devices and facilitates efficient PCB layout designs.
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE - Ensures the safety and longevity of the peripheral driver and connected components.
14 - Provides sufficient power output for driving peripherals, ensuring reliable performance.
5 - Offers flexibility for connecting to external components while keeping the design simple.
SMALL OUTLINE - Saves space and allows for compact integration in electronic systems.
6 V - Can operate at low voltage levels, ideal for battery-powered applications.
150 °C - Can withstand high temperatures, suitable for harsh environments or extended operation.
40 °C - Can operate in low-temperature conditions, making it versatile for various applications.
SINGLE - Simplifies the connection process and enhances reliability of the connections.
4.83 mm - Compact design enables installation in space-constrained environments.
9.08 mm - Compact form factor makes it easy to integrate into electronic systems with limited space.
10.16 mm - Fits well within standard PCB dimensions, ensuring easy placement and installation.
AUTOMOTIVE - Meets automotive industry standards for temperature range, ensuring reliability in automotive applications.
14 A - Provides sufficient current for driving peripherals, ensuring robust performance.
GULL WING - Facilitates easy soldering and secure connection to the PCB.
14 V - Ideal for applications that require a stable and consistent voltage supply.
100 us - Offers fast response times for activating connected peripherals, enhancing overall system efficiency.
1.7 mm - Allows for easy connection and compatibility with standard PCB layouts.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER - Supports different types of interfaces for driving various peripheral components.
11 us - Provides quick response times for deactivating connected peripherals, enhancing system performance.
SOURCE - Specifies the direction of current flow, ensuring proper operation of connected peripherals.
Peripheral Drivers AUIR3315STRR attributes and parameters. Explore more Peripheral Drivers devices from International Rectifier
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Maximum Output Current:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
AUIR3315STRR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Surge Components
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
Won-top Electronics
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
New England Semiconductor
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
Promax-johnton
Cheng-yi Electronic
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
VND830SP-E
STMicroelectronics
VND830SP-E by STMicroelectronics is a 2-function peripheral driver with max supply voltage of 36V. It offers built-in protections against transient, over current, and over voltage. Ideal for applications requiring a source output current flow direction and nominal output peak current limit of 9A.
VND5025AK-E
VND5025AK-E by STMicroelectronics is a Peripheral Driver with 2 functions, operating at 4.5-36 V. It offers built-in protections for transient, thermal, and under voltage issues. This CMOS technology driver has a small outline package style and is ideal for buffer or inverter based peripheral driver applications.
AUIPS7091GTR
Infineon Technologies
AUIPS7091GTR by Infineon: Peripheral driver with 1.5A output current, 35us turn-on time, and 45us turn-off time. Ideal for automotive applications requiring transient, overcurrent, and thermal protection in a compact small outline package. Supply voltage range from 6V to 35V makes it versatile for various automotive systems.
BTS3035EJXUMA1
BTS3035EJXUMA1 by Infineon is a peripheral driver with 8 terminals, AEC-Q100 screening level, and built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 3V to 5.5V and has a nominal output peak current limit of 5A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
BTS5210LAUMA1
BTS5210LAUMA1 by Infineon is a peripheral driver with 2 functions, operating at 5.5-40V. It offers built-in protections for transient, over current, and over voltage scenarios. This small outline device is ideal for applications requiring a nominal output peak current limit of 3.9A and turn-on/off times of 250/270µs.
ISP742RIFUMA1
ISP742RIFUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals, operating at -30 to 85 °C. It offers built-in protections for over current, over voltage, and thermal issues. This small outline package has a max supply voltage of 34 V and sink output current flow direction, suitable for buffer or inverter-based interface IC applications.
MIC2981/82YN
MIC2981/82YN by Microchip Technology is an 8-function peripheral driver with a max supply voltage of 50V and built-in transient protection. It operates in industrial temperature range (-40 to 85°C) and has a turn-on time of 2µs. Ideal for applications requiring source current flow direction, such as buffer or inverter-based interface ICs.
L298N
L298N by STMicroelectronics is a full bridge based peripheral driver with 2 functions and over current protection. It operates at a nominal voltage of 5V to 42V, with output polarity as true and source/sink current flow direction. This rectangular package is commonly used in applications requiring high power motor control.
UDN2987A
Allegro MicroSystems' UDN2987A is an 8-function peripheral driver with a max supply voltage of 35V. It offers built-in protections against transient, over current, and thermal issues. Ideal for applications requiring a true output polarity and a max output current of 0.35A.
VNQ860SPTR-E
STMicroelectronics' VNQ860SPTR-E is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and has a nominal output peak current limit of 0.7A. This small outline driver is ideal for applications requiring source flow direction in automotive systems.
ISO1H815GAUMA1
ISO1H815GAUMA1 by Infineon Technologies is a 36-terminal peripheral driver with 1.2A output current and 4.4A peak current limit. It features a half-bridge interface, sink output flow direction, and operates on power supplies of 3.3/5V to 15/30V. Ideal for applications requiring precise control in compact designs.
ULN2065B
ULN2065B by STMicroelectronics is a 16-terminal peripheral driver with 4 functions. It features built-in transient protection and operates in an industrial temperature range from -20°C to 85°C. This rectangular package with through-hole terminals is ideal for applications requiring true output polarity and fast turn-on/off times of 1 us and 1.5 us, respectively.
TPS22916CLYFPT
TPS22916CLYFPT by Texas Instruments is a 4-terminal peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and operating temp range from -40 to 85°C. It features built-in transient protection and is ideal for industrial applications requiring buffer or inverter-based interface ICs.
ISP452HUMA1
ISP452HUMA1 by Infineon Technologies is a Peripheral Driver with 4 terminals, operating voltage range of 5-34V. It offers transient protection, sink output current flow direction, and turn-on/off times of 100/150 us. Ideal for buffer or inverter-based applications in commercial extended temperature environments.
TPS22965QWDSGTQ1
TPS22965QWDSGTQ1 by Texas Instruments is a small outline, heat sink package with built-in transient protection. It operates b/w -40 to 125 °C and supports a supply voltage range of 2.5V to 5.5V, making it ideal for automotive applications requiring source and sink current flow control.
VN820PT-E
VN820PT-E by STMicroelectronics is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and can handle a max output current of 9A. This small outline package driver is ideal for applications requiring source flow direction in automotive and industrial settings.
MIC2026-2YM
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TPS27S100BRRKT
TPS27S100BRRKT by Texas Instruments is a high-side driver with built-in protections for transient, over current, thermal, and under voltage. It operates b/w -40 to 125°C with a supply voltage range of 4-40V. Ideal for automotive applications due to its robust design and fast turn-on/off times of 80/50µs.
VN808-32-E
STMicroelectronics' VN808-32-E is a peripheral driver with 8 functions, operating at supply voltages of 10.5V to 32V. This automotive-grade device offers built-in protections against transient, thermal, and under-voltage issues. With a max output current of 0.5A, it is suitable for various applications requiring source flow direction control in compact spaces.
BTS428L2
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE; Qualification: Not Qualified;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AUIR2085STR
AUIR2085STR by Infineon is a CMOS peripheral driver with 8 terminals, operating voltage of 10-15V. It offers built-in protections against transient, over current, and under voltage. Ideal for automotive applications due to AEC-Q100 screening and small outline package style.
AUIR3313STRL
AUIR3313STRL by Infineon Technologies is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It has a max output current of 23A and is suitable for applications requiring interface IC type buffer or inverter based peripheral drivers. The package style is small outline with heat sink/slug, making it ideal for compact designs.
AUIR3315STRL
AUIR3315STRL by Infineon is a 5-terminal peripheral driver with built-in protections for automotive applications. It operates b/w -40 to 150 °C, with a supply voltage range of 6-32 V and max output current of 14 A. This small outline package features gull wing terminals and offers fast turn-on/off times suitable for buffer or inverter-based interfaces.
AUIRS21844S
International Rectifier
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
AUIRS21811STR
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AUIRS21844STR
AUIRS2181STR
AUIRS2117STR
Peripheral Drivers; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AUIRS2118STR
AUIRS2118STR by Infineon is an 8-terminal peripheral driver with a supply voltage of 15V, operating b/w -40 to 125°C. Its small outline package and matte tin finish make it suitable for automotive applications requiring a surface-mountable solution. With a peak reflow temperature of 260°C, this Gull Wing terminal device is ideal for high-temperature environments.
AUIRS2113STR
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
AUIRS21814STR
AUIRS21814STR by Infineon is a CMOS peripheral driver with 14 terminals and built-in transient and under voltage protections. It operates b/w -40 to 125 °C, with a supply voltage range of 10-20 V. Ideal for automotive applications, it features a turn-on time of 0.27 us and turn-off time of 0.33 us.
AUIRS2184S
AUIR2085S
AUIRS2184STR
AUIR3314STRL
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Shape: RECTANGULAR; Width: 9.08 mm; Terminal Position: SINGLE;
AUIR3313STRR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 1; Terminal Position: SINGLE;
AUIR3313
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Maximum Output Current: 23 A; Built-in Protections: TRANSIENT; OVER CURRENT; THERMAL;
AUIR3316STRL
LATCH BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Maximum Output Current: 23 A; Package Equivalence Code: SMSIP5H,.6,67TB;
AUIRS2113S
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved