Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EPM7128STC100-15 by Intel is a 128 macrocell EE PLD with 84 I/O lines, in-system programmable with JTAG boundary scan test. It operates at a max clock frequency of 100 MHz and has a propagation delay of 15 ns. Ideal for applications requiring fast processing speeds and high I/O capabilities.
Median Price
$11.980
Lifecycle Status
Suppliers In-Stock
45
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$10.040
1k+ parts
$9.060
10k+ parts
$7.770
Verical
Digiode
$11.381
-
Bristol Electronics
$21.600
Nova Conductors
$24.170
Component Electronics Inc.
$38.460
$28.850
$25.000
Vyrian
Chip Stock
Sensible Micro Corp
Velocity Electronics
ComSIT Distribution GmbH
Speed Components Ltd
Q Components
Maverick Electronics, Inc.
Greenchips
SIE Connect GmbH - GreenChips
LIBRA Elektronik GmbH
Cyclops Electronics Ltd
Quantum Digital Technology
Diverse Electronics
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
LWI Electronics Inc
Electronic Expediters
ACDS - Activité Composants Distribution Service
Legend Electronics Inc.
PC Components Company LLC
Holdelec - ElecDif-Pro
Sunrise Surplus Inc.
Semi Source
Cogito LLC
J2 Sourcing AB
Connector Distribution Corp
Right Parts Inc.
Sinequanon
North Shore Components
NexGen Digital
Semtec, LLC
Pegasus Components GmbH
Resion
Prism Electronics
BCID Electronics Ltd.
Mil-Aero Solutions, Inc.
J & M Industries LLC
Lantek
Inland Empire Components Inc.
Andel Nordic
$2.347
$2.253
Vigor
$7.000
One Stop Electronics
$10.180
Semicontronic
$9.926
$9.875
Ampacity Inc.
Corphita
$10.782
Continental Prestige Electronics
$23.687
MARBEL Systems
$33.037
Texas Native Microelectronics
$40.394
$35.547
Kenton Components
$45.568
$40.099
Microchip USA
$49.900
Modulus Dynamics
$88.930
Qasali Group International
$102.527
$90.224
Corohmni
$154.751
Lixinc
A-Z Elektronik GmbH
Authorized Procurement Solutions
Argo Parts USA
Alle Elektronik GmbH
Glotronic Ltd.
GreenTree Electronics
Perfect Parts
Assy Fe
Supply Digital
Cyclops Electronics Ltd (Excess)
Pacific Micro-Tech
Kepictronics
Speed Components Ltd (Excess)
Provides durability while keeping the weight of the device light, making it ideal for various applications.
Low propagation delay ensures efficient and quick processing of data.
Allows for a wide range of input voltages, increasing compatibility with different systems.
Ample macro cells provide flexibility and scalability for intricate programmable logic configurations.
CMOS technology offers low power consumption and high noise immunity, enhancing overall performance.
Standard nominal supply voltage ensures compatibility with common power sources.
High clock frequency enables rapid processing of instructions and data, suitable for real-time applications.
Programmable Logic Devices (PLD) EPM7128STC100-15 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Intel
Programmable IC Type:
In-System Programmable:
Organization:
Output Function:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Moisture Sensitivity Level (MSL):
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
EPM7128STC100-15 Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Intel Corporation (commonly known as Intel) is an American multinational corporation and technology company headquartered in Santa Clara, California. It is one of the world's largest semiconductor chip manufacturer by revenue, and is one of the developers of the x86 series of instruction sets found in most personal computers (PCs). Incorporated in Delaware, Intel ranked No. 45 in the 2020 Fortune 500 list of the largest United States corporations by total revenue for nearly a decade, from 2007 to 2016 fiscal years. Intel supplies microprocessors for computer system manufacturers such as Acer, Lenovo, HP, and Dell. Intel also manufactures motherboard chipsets, network interface controllers and integrated circuits, flash memory, graphics chips, embedded processors and other devices related to communications and computing. Intel (integrated and electronics) was founded on July 18, 1968, by semiconductor pioneers Gordon Moore (of Moore's law) and Robert Noyce (1927–1990), and is associated with the executive leadership and vision of Andrew Grove. Intel was a key component of the rise of Silicon Valley as a high-tech center. Noyce was a key inventor of the integrated circuit (microchip). Intel was an early developer of SRAM and DRAM memory chips, which represented the majority of its business until 1981. Although Intel created the world's first commercial microprocessor chip in 1971, it was not until the success of the personal computer (PC) that this became its primary business.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diotec Semiconductor Ag
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
PIC18F4550-I/PT
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
1N5819HW-7-F
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
EP20K160ETC144-2X
Intel
EP20K160ETC144-2X by Intel is a PLD with 6400 logic cells, 1.93 ns propagation delay, and 160 MHz max clock frequency. Ideal for applications requiring high-speed processing and complex logic functions in a compact form factor.
EPM3256ATI144-10N
Altera
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EPM240M100C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: BGA; Package Shape: SQUARE;
ATF1504BE-7AU100
Microchip Technology's ATF1504BE-7AU100 is a 100-terminal PLD with 7.5ns propagation delay, suitable for industrial applications. Featuring CMOS technology and a max supply voltage of 1.9V, it offers 64 I/O lines and operates b/w -40 to 85°C. Ideal for designs requiring fast response times in compact form factors.
5962-8867005LA
Teledyne E2v (Uk)
OT PLD; Grading Of Temperature: MILITARY; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
EPM3064ATI100-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
5M570ZF256C5N
The Intel 5M570ZF256C5N is a FLASH PLD with 440 macro cells, 159 I/O lines, and a max clock frequency of 118.3 MHz. It is used in applications requiring programmable logic devices with low profile grid array package style for surface mount technology. The device offers fast propagation delay of 17.7 ns and operates at temperatures ranging from 0 to 85°C.
GAL16V8D-15LJN
Lattice Semiconductor
GAL16V8D-15LJN by Lattice Semiconductor is a 5.25V EE PLD with 15ns propagation delay, featuring 18 inputs and 8 I/O lines. Ideal for applications requiring a max clock frequency of 45.5MHz, such as PAL-type architectures in commercial-grade environments.
LC4064V-10TN48I
LC4064V-10TN48I by Lattice Semiconductor is a 3.3V EE PLD with 64 macro cells, 36 inputs, and 32 I/O lines. With a propagation delay of 10ns and max clock frequency of 86MHz, it's ideal for applications requiring fast processing speeds like industrial automation and telecommunications equipment. The device is surface mountable with a square package shape and in-system programmability for easy integration into various electronic designs.
LC4032V-5TN44C
LC4032V-5TN44C by Lattice Semiconductor is a 32 macrocell EE PLD with 32 inputs and 30 outputs. It has a max clock frequency of 156 MHz and can be used for programmable logic applications.
EPM7064SLC44-5N
The EPM7064SLC44-5N by Altera is a programmable logic device with 64 macro cells. It operates at a maximum clock frequency of 250 MHz and has a propagation delay of 5 ns. This device is surface mountable and can be programmed in-system. It has 36 I/O lines and supports configurable I/O operation with 3.3V or 5V. The package shape is square with a J bend terminal form. With a package code of QCCJ, it has a maximum seated height of 4.572 mm. This PLD is commonly used for various applications that require programmable logic functions.
EPF10K10TI144-4N
The EPF10K10TI144-4N by Altera is a programmable logic device with 576 logic cells, propagation delay of 0.6 ns, and CMOS technology. It has 102 inputs and outputs, a maximum supply voltage of 5.25 V, and is surface mountable. This PLD is suitable for industrial applications.
5M80ZE64C4N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 64; Package Code: HTFQFP; Package Shape: SQUARE;
ATF1504AS-10AU44
Atmel
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
LC4064V-75TN100E
LC4064V-75TN100E by Lattice Semiconductor is a 3.3V EE PLD with 64 macro cells and 74 inputs. With a propagation delay of 7.5 ns, it operates at up to 111 MHz clock frequency. Ideal for applications requiring in-system programmability and JTAG boundary scan testing in a compact square package with gull wing terminals.
M4A5-64/32-10VNC48
M4A5-64/32-10VNC48 by Lattice Semiconductor is a 64 macrocell EE PLD with 34 inputs and 32 I/O lines. It operates at a max clock frequency of 62.5 MHz, has a propagation delay of 10 ns, and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile I/O configurations in commercial-grade environments.
ATF1502AS-10JU44
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
XC95288XL-10TQG144C
Xilinx
The Xilinx XC95288XL-10TQG144C is a FLASH PLD with 288 macro cells, 117 I/O lines, and 100 MHz clock frequency. It operates at a max supply voltage of 3.6V and has a propagation delay of 10ns. Ideal for applications requiring programmable logic devices in commercial temperature environments.
XC9572XL-7TQG100I
The Xilinx XC9572XL-7TQG100I is a 72 macrocell FLASH PLD with 7.5 ns propagation delay and 125 MHz max clock frequency. Ideal for industrial applications, it features in-system programmability, 72 I/O lines, and JTAG boundary scan test capability.
XC2C32A-6VQ44I
Xilinx XC2C32A-6VQ44I is a 32 macrocell FLASH PLD with 6 ns propagation delay and 300 MHz clock frequency. Ideal for industrial applications, it features in-system programmability, 33 I/O lines, and JTAG boundary scan test capability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EPM7064STC44-10N
EPM7064STC44-10N by Intel is a 64 macrocell EE PLD with 36 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile input/output configurations in commercial-grade environments.
The EPM7064STC44-10N by Altera is a Programmable Logic Device (PLD) with 64 macro cells. It has a maximum clock frequency of 125 MHz and a propagation delay of 10 ns. This PLD is surface mountable and operates at a nominal supply voltage of 5V. It is commonly used for in-system programmable applications.
EPM7128AETC100-5N
Intel's EPM7128AETC100-5N is a 128 macrocell EE PLD with 5ns propagation delay and 192.3MHz clock frequency. Ideal for applications requiring in-system programmability, it features 84 I/O lines, operates at max temp of 70°C, and has a package style of flatpack with low profile and fine pitch.
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
EPM7128SQI100-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
The Intel EPM7128SQI100-10N is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed logic processing within a temperature range of -40 to 85°C.
EPM7064AETI100-7N
EPM7064AETI100-7N by Intel is a 64 macrocell EE PLD with 68 I/O lines, operating at up to 135.1 MHz clock frequency. It features a propagation delay of 7.5 ns and can handle a max supply voltage of 3.6 V. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing capabilities.
EPM7128STC100-15N
EPM7128STC100-15N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 100 MHz. It features a propagation delay of 15 ns and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile I/O capabilities in commercial-grade environments.
EPM7256AETI144-7N
EPM7128BTC100-4N
EPM7128BTC100-4N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 243.9 MHz clock frequency. It has a propagation delay of 4 ns and can be used for in-system programmable applications requiring low profile, fine pitch packaging.
EPM7128STI100-10N
The EPM7128STI100-10N by Altera is a programmable logic device with 128 macro cells. It has a propagation delay of 10 ns and can operate at a maximum clock frequency of 125 MHz. The device supports in-system programming and has 84 I/O lines. It can be powered by 3.3V or 5V supplies and is compatible with CMOS technology. It is commonly used in industrial applications.
EPM7128STI100-10N by Intel is a 128 macrocell EE PLD with 10 ns propagation delay and 125 MHz max clock frequency. It is used in industrial applications, featuring in-system programmability, JTAG boundary scan test, and 84 I/O lines for versatile connectivity.
EPM7192SQI160-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 160; Package Code: QFP; Package Shape: SQUARE;
EPM7064SLC44-10N
The EPM7064SLC44-10N by Altera is a programmable logic device with 64 macro cells. It has a propagation delay of 10 ns and a maximum supply voltage of 5.25 V. This CMOS device is surface mountable and in-system programmable. Its application includes output function as macrocell and it can operate at a maximum clock frequency of 125 MHz.
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved