Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
IS31FL3730-QFLS2-TR by Integrated Silicon Solution is a DOT MATRIX LED DISPLAY DRIVER with SERIAL data input mode. It operates b/w -40 to 85 °C and supports up to 128 segments. Ideal for graphics display applications requiring a supply voltage range of 2.7V to 5.5V in industrial settings.
Median Price
$1.070
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.613
1k+ parts
$0.547
10k+ parts
$0.496
DigiKey
$0.535
-
Nova Conductors
$0.621
Maritex
$1.168
$0.755
$0.527
Chip Stock
Vyrian
Netroflash
$0.590
$0.577
Component Stockers USA
$1.130
$0.790
$0.510
$0.610
Perfect Parts
GreenTree Electronics
Eastek
Authorized Procurement Solutions
Provides versatile display options for different types of visual information, making the product suitable for a variety of applications.
Allows for easy and efficient data transmission, ensuring smooth communication between the driver and the display.
Enables easy and secure installation of the driver on a circuit board, saving space and promoting a compact design.
Ensures compatibility with a wide range of power sources, providing flexibility in usage scenarios.
Facilitates uniform and efficient placement on the circuit board, contributing to a neat and organized layout.
Offers sufficient connectivity options for interfacing with other components, enhancing the driver's versatility.
Combination of package styles ensures efficient heat dissipation and compact dimensions, enhancing the overall performance and design of the driver.
Allows operation under low power conditions, making the driver suitable for energy-efficient applications.
Ensures the driver can function reliably in a wide range of environmental conditions, improving its durability and performance.
Capable of operating in extreme temperature conditions, expanding the range of potential applications for the product.
Provides a durable and corrosion-resistant finish, ensuring long-term reliability and stability of the connections.
Optimal voltage level for consistent and efficient performance of the driver, enhancing the overall reliability of the display.
Graphics Display Drivers IS31FL3730-QFLS2-TR attributes and parameters. Explore more Graphics Display Drivers devices from Integrated Silicon Solution
Data Input Mode:
Display Mode:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Minimum fmax:
IS31FL3730-QFLS2-TR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
ISSI is a technology leader that designs, develops, and markets high performance integrated circuits for the following key markets: (i) automotive, (ii) industrial and medical, (iii) communications/enterprise, and (iv) digital consumer. Our primary products are high speed and low power SRAM and low and medium density DRAM, NOR/NAND Flash, and eMMC products. We target these key markets with our cost-effective, high-quality semiconductor products and seek to build long-term relationships with our customers. We have been a committed long-term supplier of memory products, including lower density and smaller volume products, even during periods of tight manufacturing capacity. Our outsourced manufacturing model is based upon a history of joint technology development relationships with key foundries. We also make strategic equity purchases in selected foundries. We have expanded our presence in important markets by adding to design groups in US, China, Korea and Taiwan, and investing in applications engineering and technical support in closer proximity to end customers. These groups complement our core engineering and product management teams located in our Silicon Valley Headquarters in California. In recent years, the need for sophisticated semiconductor memory has expanded beyond the personal computer market and into the automotive, communications, digital consumer, industrial and medical markets. Increased memory content is required in these products in order to help process large amounts of data.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
NC7WZ17P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bkc Semiconductors
LM3410XMFX/NOPB
LM3410XMFX/NOPB by Texas Instruments is a small outline LED display driver with 5 terminals, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage range of 2.7V to 5.5V. The package style is low profile and surface mountable, making it ideal for graphics display drivers in compact designs.
LM27961TLX/NOPB
National Semiconductor
LM27961TLX/NOPB by National Semiconductor is a Graphics Display Driver with 18 terminals, operating voltage range of 2.7V to 5.5V, and peak reflow temperature of 260°C. It is ideal for LED display driver applications due to its thin profile package style and fine pitch terminal design.
CD4056BMT
CD4056BMT by Texas Instruments is a graphics display driver with 7-bit data input mode, operating at 3-18V. Ideal for segment display applications, it features a MILITARY-grade temperature range of -55 to 125 °C and a small outline package style.
PCF85176T
PCF85176T by NXP Semiconductors is a 56-terminal graphics display driver with dot matrix display mode and serial data input. It operates b/w -40 to 85 °C, supports multiplexed displays, and has a max supply voltage of 6.5 V. Ideal for industrial applications requiring a CMOS technology interface IC for liquid crystal displays.
LM3409HVMY/NOPB
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE;
TLC5925IPWRG4
TLC5925IPWRG4 by Texas Instruments is a graphics display driver with 16 segments, operating at 3-5.5V. It features constant-current output, serial data input mode, and small outline package style. Ideal for LED displays in automotive applications due to its wide temperature range (-40 to 125°C) and low supply current (13mA).
CAP1188-1-CP-TR
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
CAP1114-1-EZK-TR
Microchip Technology
CAP1114-1-EZK-TR by Microchip Technology is a SERIAL graphics display driver with 32 terminals, operating at temperatures from -40 to 125 °C. It has a max supply voltage of 3.6 V and a low supply current of 1 mA, making it ideal for automotive LED display driver applications.
MXHV9910BE
IXYS Corporation
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR;
CAP1126-1-AP-TR
CAP1126-1-AP-TR by Microchip Technology is a graphics display driver with SERIAL data input mode, 16 terminals, and TRUE output polarity. It operates b/w 0 to 85 °C and has a supply voltage range of 3V to 3.6V. Ideal for LED display driver applications due to its compact square chip carrier package style.
MAX6951EEE
Maxim Integrated
MAX6951EEE by Maxim Integrated is a graphics display driver with 8-digit segments, 8 segments per digit, and a max supply voltage of 5.5V. It operates in industrial temperature range (-40 to 85°C) and uses CMOS technology. Ideal for LED displays, it features serial data input mode and small outline package style.
BCR401RE6327HTSA1
Infineon Technologies
Infineon Technologies' BCR401RE6327HTSA1 is a LED display driver with 2 segments, operating at a nominal voltage of 10V and max supply voltage of 18V. This small outline, thin profile package with gull wing terminals is designed for graphics display applications.
CAT4104V-GT3
CAT4104V-GT3 by Onsemi is a LED display driver with 4 segments, operating at 3-5.5 V. Its small outline package and dual terminal position make it suitable for industrial applications requiring temperatures from -40 to 85°C. With a compact size of 4.9mm x 3.9mm x 1.75mm, it's ideal for graphics display drivers in various electronic devices.
LM3914VX/NOPB
LM3914VX/NOPB by Texas Instruments is a LED display driver with 10 channels and segments. It operates on 3-20 V, with constant-current output and analog data input mode. Ideal for bar graph displays in commercial applications, it comes in a square chip carrier package with 20 terminals.
PCF8577CT/F3,118
NXP Semiconductors' PCF8577CT/F3,118 is a 40-terminal graphics display driver with dot matrix display mode and serial data input. Operating b/w -40 to 85 °C, it supports multiplexed displays and has a max supply voltage of 6 V. Ideal for industrial applications requiring liquid crystal display drivers in compact spaces.
FAN5702UC08X
FAN5702UC08X by Onsemi is a graphics display driver with 16 terminals, operating voltage range of 2.7V to 5.5V, and peak reflow temperature of 260°C. It features a serial data input mode and is designed for LED display driver applications in industrial settings. The package style is grid array with very thin profile and fine pitch, making it suitable for compact designs requiring precise control over multiple segments.
TLC59108IPWR
TLC59108IPWR by Texas Instruments is an LED display driver with 8 channels, constant-current output, and serial data input mode. It operates in industrial temperature range (-40 to 85°C) and supports a supply voltage of 3-5.5V. Ideal for graphics displays, it comes in a small outline package with dual terminals for surface mount applications.
MLX81113KDC-BAB-000-RE
Melexis N V
MLX81113KDC-BAB-000-RE by Melexis N V is a LED display driver with 8 terminals, operating temperature range of -40 to 125°C, and supply voltage from 4.5V to 18V. It is used in graphics displays for various applications requiring true output polarity and standard input characteristics.
LM27952SD/NOPB
LM27952SD/NOPB by Texas Instruments is a graphics display driver with 14 terminals, operating voltage range of 3-5.5V, and constant-current output for LED displays. It features a small outline package style, industrial temperature grade, and CMOS technology suitable for LED display applications in various industries.
UAA180
UAA180 by Infineon Technologies is a Graphics Display Driver with 12 segments and 18 terminals. It operates b/w -25°C to 85°C, with a supply voltage range of 10V to 18V. This rectangular package in-line driver is ideal for segment display applications requiring bipolar technology.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IS31FL3731-QFLS2-TR
Integrated Silicon Solution
IS31FL3731-QFLS2-TR by Integrated Silicon Solution is a DOT MATRIX LED DISPLAY DRIVER with SERIAL data input mode. Operating voltage range from 2.7V to 5.5V, suitable for INDUSTRIAL applications. Features 144 segments in a SQUARE package style, making it ideal for graphics display drivers in compact designs.
IS31FL3236A-QFLS2-TR
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 44; Package Code: HVQCCN; Package Shape: SQUARE;
IS31FL3731-SALS2
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
IS31FL3743B-QULS4-TR
IS31FL3743B-QULS4-TR by Integrated Silicon Solution is a DOT MATRIX LED DISPLAY DRIVER with SERIAL data input mode. It operates b/w -40 to 125 °C and supports up to 198 segments. Ideal for automotive applications due to its low profile CHIP CARRIER package style and wide supply voltage range of 2.7V to 5.5V.
IS31FL3731-SALS2-TR
IS31FL3731C-SALS2
IS31FL3236A-QFLS4-TR
IS31FL3236A-QFLS4-TR by Integrated Silicon Solution is a SERIAL graphics display driver with 36 segments. It operates b/w -40 to 125 °C and has a supply voltage range of 2.7V to 5.5V, making it suitable for automotive applications. The chip carrier package style with a very thin profile and open-collector output polarity make it ideal for compact LED display designs.
IS31FL3193-DLS2-TR
IS31FL3193-DLS2-TR by Integrated Silicon Solution is a LED display driver with 10 terminals, operating voltage range of 2.7V to 5.5V, and max frequency of 0.4 MHz. It is ideal for graphics displays, featuring a small outline package style and serial data input mode for industrial applications at temperatures ranging from -40°C to 85°C.
IS31FL3731C-QFLS2-TR
IS31FL3731C-QFLS2-TR by Integrated Silicon Solution is a DOT MATRIX LED DISPLAY DRIVER with SERIAL data input mode. It operates b/w -40 to 85 °C, suitable for INDUSTRIAL applications. This chip carrier has 144 segments, terminal pitch of 0.4 mm, and a compact size of 4x4 mm for surface mount installation.
IS31FL3205-QFLS4-TR
Lumissil Microsystems
IS31FL3205-QFLS4-TR by Lumissil Microsystems is a graphics display driver with 12 segments, operating at 1 MHz. It features a serial data input mode, true output polarity, and operates b/w -40 to 125 °C. Ideal for LED displays in applications requiring precise control and low power consumption.
IS31FL3194-CLS2-TR
IS31FL3194-CLS2-TR by Integrated Silicon Solution is a LED display driver with 3 segments, serial data input mode, and 5.5V max supply voltage. Ideal for industrial applications requiring fine pitch grid array packages in temperature range of -40 to 85°C.
IS31FL3218-QFLS2-TR
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
IS31FL3736B-QFLS4-TR
IS31FL3736B-QFLS4-TR by Lumissil Microsystems is a graphics display driver with dot matrix display mode and serial data input mode. It is surface mountable, has a max supply voltage of 5.5V, and is commonly used in automotive applications.
IS31FL3726A-ZLS4-TR
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HTSSOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
IS31FL3732A-QFLS2-TR
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;
IS31FL3736A-QFLS4-TR
LED DISPLAY DRIVER; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
IS31FL3737B-QFLS4-TR
IS31FL3733-QFLS4-TR
IS31FL3733-QFLS4-TR by Integrated Silicon Solution is a graphics display driver with dot matrix display mode and serial data input. It is surface mountable, has 48 terminals, and operates at a supply voltage range of 2.7V to 5.5V. This LED display driver is commonly used in automotive applications due to its temperature grade and compact size (6mm x 6mm).
IS31FL3733B-TQLS4-TR
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HTFQFP; Package Shape: SQUARE; No. of Segments: 192;
IS31FL3730-QFLS2-TR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved