Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AC MOTOR CONTROLLER; No. of Terminals: 48; Package Code: HTFQFP; Package Shape: SQUARE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Modulus Dynamics
$19.270
$18.499
$17.728
Corphita
Motion Control ICs TLE7183QUSCD3 attributes and parameters. Explore more Motion Control ICs devices from Infineon Technologies
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
TLE7183QUSCD3 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Taiwan Semiconductor
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
PDRV8220DRLR
The Texas Instruments PDRV8220DRLR is a Motion Control IC with 12V nominal voltage, 1.76A max output current, and automotive temperature grade. It is ideal for brush DC motor control applications due to its small outline package, dual terminal position, and wide operating temperature range from -40°C to 125°C.
DRV8353HMRTAT
DRV8353HMRTAT by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage of 9-10V, and output current up to 1A. Ideal for Brushless DC Motor control applications in military-grade environments, featuring a compact square package design for surface mounting.
DRV8436RGER
DRV8436RGER by Texas Instruments is a Motion Control IC with 24 V nominal voltage, suitable for automotive applications. It features a max output current of 0.01 A and operates in a temperature range from -40 to 125 °C. This IC is designed as a stepper motor controller with surface mount packaging and quad terminal position.
L6235QTR
L6235QTR by STMicroelectronics is a Motion Control IC with 48V nominal voltage, suitable for automotive applications. It features a square package shape, BCDMOS technology, and supports brushless DC motor control. With a max operating temperature of 150°C and surface mount capability, it offers high performance in compact designs.
E-L6219R013TR
E-L6219R013TR by STMicroelectronics is a motion control IC with a supply voltage range of 4.75V to 5.25V and a max output current of 1A. It is a bipolar stepper motor controller, suitable for applications requiring precise motion control in compact designs.
DRV8702DQRHBRQ1
DRV8702DQRHBRQ1 by Texas Instruments is a Motion Control IC with 32 terminals, operating voltage range of 5.5V to 45V, and temperature grade suitable for automotive applications. It features a package style of CHIP CARRIER and is designed for BRUSH DC MOTOR CONTROL in harsh environments with an operating temperature range from -40°C to 125°C.
A3982SLBTR-T
Allegro MicroSystems
Allegro MicroSystems' A3982SLBTR-T is a motion control IC with 24 terminals, operating at -20 to 85°C. It features a max output current of 2A and supports stepper motor control applications. The IC has a small outline package style, measures 15.4mm in length, and operates on power supplies of 3.3/5V.
SLA7076MPR
Allegro MicroSystems' SLA7076MPR is a Motion Control IC with 23 terminals, operating voltage of 3-5.5V, and output current up to 1.5A. Ideal for stepper motor control applications, it has a temperature range of -20 to 85°C and peak reflow temp of 260°C.
DRV8838DSGR
DRV8838DSGR by Texas Instruments is a motion control IC with a small outline, heat sink package. It operates at a nominal voltage of 3V and can handle a max output current of 1.8A. This IC is commonly used as a brush DC motor controller in industrial applications.
LM629M-8/NOPB
National Semiconductor
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV8703DQRHBRQ1
DRV8703DQRHBRQ1 by Texas Instruments is a Motion Control IC with 32 terminals, operating at -40 to 125°C. It supports supply voltage range of 5.5V to 45V and is ideal for automotive applications due to its compact size (5x5mm) and robust construction in PLASTIC/EPOXY package.
L6234PD
STMicroelectronics L6234PD is a Motion Control IC with 20 terminals, operating voltage of 7-42V, and max output current of 5A. Ideal for automotive applications due to its BICMOS technology, it's a Brushless DC Motor Controller in small outline package suitable for surface mount assembly.
BD63150AFM-E2
ROHM
ROHM's BD63150AFM-E2 is a motion control IC with a max output current of 6A. It operates at a nominal voltage of 24V and has a small outline package style. This IC is suitable for brush DC motor control applications.
DRV8871DDA
DRV8871DDA by Texas Instruments is a motion control IC with 8 terminals and a supply voltage range of 6.5V to 45V. It offers a max output current of 3.6A, making it suitable for brush DC motor control applications in automotive environments. With a compact rectangular package style and dual terminal position, it operates b/w -40°C to 125°C temperature range.
TC647BEOA
Microchip Technology
Microchip TC647BEOA is a Motion Control IC with 8 terminals, operating voltage of 3.3-5V, and temp range -40 to 85°C. Ideal for Brushless DC Motor control applications due to small outline package and industrial temperature grade suitability. Features matte tin finish, gull wing terminals, and moisture sensitivity level of 3.
DRV10970PWPR
DRV10970PWPR by Texas Instruments is a Motion Control IC for BLDC motors. It operates at 5-18V, with 2A output current and 12V nominal voltage. With a small outline package and industrial temperature grade, it's ideal for various motion control applications.
DRV8320SRTVT
Texas Instruments' DRV8320SRTVT is a Motion Control IC with 32 terminals, operating from -40 to 125°C. It supports BLDC motors, with a supply voltage range of 6-60V and max output current of 1A. Ideal for automotive applications due to its compact size and high temperature grade.
LB1836M-TLM-E
Sanyo Electric
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC33HB2001EK
NXP Semiconductors
MC33HB2001EK by NXP Semiconductors is a Motion Control IC with 32 terminals, operating voltage range of 5-28V, and max output current of 16A. Ideal for automotive applications due to AEC-Q100 screening, MOS technology, and compact design.
FNB34060T
FNB34060T by Onsemi is a Motion Control IC with 27 terminals, operating b/w -40 to 150°C. It supports AC motor control, offering a max output current of 80A at supply voltages ranging from 14V to 16.5V. Ideal for automotive applications due to its temperature grade and flange mount package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLE7181EMXUMA1
TLE7181EMXUMA1 by Infineon is a Motion Control IC with 24 terminals, operating voltage range of 5.5V to 45V. It's designed for brush DC motor control applications, featuring a small outline package with low profile and gull wing terminal form.
TLE7182EMXUMA1
TLE7182EMXUMA1 by Infineon Technologies is a Motion Control IC with 24 terminals, operating at a nominal voltage of 12V. It is designed for brush DC motor control applications, featuring a small outline package style and dual terminal position. The IC has a max supply voltage of 45V and can operate within a range of 5.5V to 45V.
TLE7181EMXUMA1/SAMPLE
BRUSH DC MOTOR CONTROLLER;
TLE7183QUXUMA1
AC MOTOR CONTROLLER; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 3;
TLE72093RAUMA1
Infineon's TLE72093RAUMA1 is a Motion Control IC for automotive applications. It operates b/w -40 to 125°C with Vsup ranging from 5V to 28V. This small outline, heat sink package has 20 terminals and is ideal for stepper motor control in tight spaces.
TLE71851EXUMA1
TLE71851EXUMA1 by Infineon Technologies is a motion control IC with a nominal voltage of 7V. It is a small outline package with 36 terminals and can be used as an AC motor controller. Its compact size (12.8mm length, 7.6mm width) makes it suitable for various applications requiring precise motion control.
TLE7184FXUMA2
BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 48; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES; Nominal Supply Voltage (Vsup): 8 V;
TLE7183QUSCD2
AC MOTOR CONTROLLER; No. of Terminals: 48; Package Code: HTFQFP; Package Shape: SQUARE; Surface Mount: YES; Maximum Supply Voltage (Vsup): 20 V;
TLE7183FXUMA5
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 48; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
TLE7183QUSCD4
AC MOTOR CONTROLLER; No. of Terminals: 48; Package Code: HTFQFP; Package Shape: SQUARE; Surface Mount: YES; Maximum Seated Height: 1.2 mm;
TLE7183FXUMA6
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
TLE7183QUSCD5
AC MOTOR CONTROLLER; No. of Terminals: 48; Package Code: HTFQFP; Package Shape: SQUARE; Surface Mount: YES; Nominal Supply Voltage (Vsup): 14 V;
TLE7183FXUMA7
TLE7183QUSCD1
TLE7183FXUMA4
TLE7182EM
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 24; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Peak Reflow Temperature (C): 260;
TLE7183FXUMA8
TLE7183F
TLE7183FXUMA9
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved