Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TLE4286G by Infineon is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1.1V. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
Median Price
$1.435
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Maritex
1+ parts
100+ parts
$0.711
1k+ parts
$0.551
10k+ parts
-
ComSIT Distribution GmbH
Vyrian
Digiode
Nova Conductors
Modulus Dynamics
$6.063
$5.820
$5.578
Ampacity Inc.
$11.500
AZTECH Wire
$16.935
Andel Nordic
$34.780
$24.346
Perfect Parts
Kepictronics
A-Z Elektronik GmbH
Assy Fe
Argo Parts USA
Continental Prestige Electronics
Bastille Electronics
Corphita
ChipstoGo Electronic ltd
The use of plastic/epoxy material in the package body makes the regulator lightweight and cost-effective.
Low dropout voltage ensures efficient regulation of output voltage even when input voltage decreases close to output voltage.
Surface mount capability makes it easy to integrate this regulator onto printed circuit boards, saving space and potentially reducing assembly costs.
High operating temperature range allows the regulator to function reliably in a wide range of environmental conditions.
Compliance with AEC-Q100 automotive qualification standard ensures the regulator meets high reliability and quality standards for automotive applications.
Stable 5V output voltage makes it suitable for powering a wide range of electronic devices and components.
Fixed Regulators - Positive Single Output LDO TLE4286G attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Infineon Technologies
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Screening Level:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Voltage Tolerance:
Width:
TLE4286G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1554216002
Molex
WIRE AND CABLE;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Thinking Electronic Industrial
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
2N7002DWH6327XTSA1
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Rectron
MCP1825ST-3302E/DB
Microchip Technology
MCP1825ST-3302E/DB by Microchip is a 3.3V fixed positive LDO regulator with 0.5A output current and 2.5% voltage tolerance. It operates b/w -40 to 125°C, ideal for applications requiring stable voltage supply in compact spaces like IoT devices or portable electronics.
TLV70033DCKR
TLV70033DCKR by Texas Instruments is a fixed positive single output LDO regulator with a max dropout voltage of 0.25 V. It operates at temperatures ranging from -40°C to 125°C and has a max output current of 0.2 A. This regulator is commonly used in applications that require stable and reliable power supply, such as consumer electronics and industrial equipment.
LP2985IM5-3.3
LP2985IM5-3.3 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It has a small outline package style, Gull Wing terminal form, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LD3985M33R
STMicroelectronics
STMicroelectronics' LD3985M33R is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, low profile, shrink pitch, ideal for surface mount designs with limited space constraints.
LD39115J33R
STMicroelectronics LD39115J33R is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It has a very thin profile, fine pitch grid array package suitable for surface mount applications in various electronic devices operating within -40 to 125°C temperature range.
LD1117ADT33TR
LD1117ADT33TR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates in an input voltage range of 4.75V to 10V, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline with gull wing terminals, ideal for surface mount assembly in electronic devices where space is limited.
LT1129IST-5#TRPBF
Analog Devices
Analog Devices' LT1129IST-5#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.7V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
TLV1117-33IDRJR
TLV1117-33IDRJR by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.8A max output current, and 1.4V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact form factor with operating temperatures ranging from -40 to 125°C.
LM2936HVMAX-5.0/NOPB
LM2936HVMAX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 50mA. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers precise regulation with low dropout voltage for efficient power management solutions.
TPS73733QDRBRQ1
TPS73733QDRBRQ1 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. The package style is small outline with very thin profile, ideal for space-constrained designs.
NCV4274ADT50RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Qualification Status: Not Qualified; Maximum Time At Peak Reflow Temperature (s): 30;
LM2936MP-5.0/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
LP2985A-33DBVR
LP2985A-33DBVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It features a small outline, low profile package style and operates within an extended temperature range from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LP2951-33DRG4
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
LM2936HVBMAX3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
AP2114H-3.3TRG1
Bcd Semiconductor Manufacturing
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.5 %; Maximum Dropout Voltage-1: .75 V;
LM1117T-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %; Terminal Finish: Matte Tin (Sn);
MIC5353-3.3YMT-TR
MIC5353-3.3YMT-TR by Microchip: LDO regulator with 3.3V output, 0.5A max current, and 6V input. Ideal for applications requiring low dropout voltage, such as portable devices or IoT sensors. Package style is small outline with very thin profile, suitable for space-constrained designs.
LP38692MP-3.3/NOPB
Texas Instruments LP38692MP-3.3/NOPB is a 1A fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 1V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LT1086IM-3.3#TRPBF
Analog Devices' LT1086IM-3.3#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces due to its small outline package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLE4286GHTSA1
TLE4286GHTSA1 by Infineon is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.015A. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces. The package style is small outline, thin profile, with Gull Wing terminals for surface mount assembly.
TLE42744GSV33HTMA1
TLE42744GSV33HTMA1 by Infineon is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 1.1A. Operating temperature ranges from -40 to 150°C, making it suitable for automotive applications meeting AEC-Q100 standards. Its small outline package with gull wing terminals and tin finish offers space-efficient mounting in various electronic devices.
TLE42962GV50HTSA1
TLE42962GV50HTSA1 by Infineon Technologies is a fixed positive single output LDO regulator with a max dropout voltage of 0.3V and an operating temperature range of -40°C to 150°C. It is suitable for applications requiring a min input voltage of 5.5V and a max output current of 0.03A, such as power management systems in automotive electronics.
TLE42962GV50TR
TLE42962GV50TR by Infineon Technologies is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.3V. It operates in temperatures ranging from -40°C to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
TLE42962GV50XT
TLE42962GV50XT by Infineon Technologies is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.3V. It operates in temperatures ranging from -40°C to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline and thin profile package style, this regulator is ideal for surface mount designs where space is limited.
TLE42642GHTSA2
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 2 %;
TLE4286GXT
TLE4286GXT by Infineon is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1.1V. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications due to its AEC-Q100 screening level and small outline package style.
TLE42764GV50ATMA1
TLE42764GV50ATMA1 by Infineon is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
TLE4285GHTSA1
TLE4285GHTSA1 by Infineon is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1.1V. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
TLE4264GXT
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Operating Temperature (TJ-Max): 150 Cel;
TLE4286G
Siemens
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Voltage Tolerance: 4 %; Surface Mount: YES; Package Shape: RECTANGULAR;
TLE4286GNT
TLE4286GNT by Infineon is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1.1V. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
TLE4286GNTSA1
TLE4286GNTSA1 by Infineon is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1.1V. It operates in temperatures ranging from -40°C to 150°C, making it suitable for automotive applications meeting AEC-Q100 standards. The package style is small outline, thin profile, with gull wing terminals for surface mount assembly.
TLE4264GHTSA1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Maximum Dropout Voltage-1: .5 V;
TLE42712GATMA1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 7; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 65 V; Maximum Voltage Tolerance: 2 %;
TLE4285GXT
TLE4285GXT by Infineon Technologies is a fixed positive single output LDO regulator with a max dropout voltage of 1.1V and an operating temperature range of -40°C to 150°C. It is suitable for applications requiring a stable 5V output voltage, such as automotive electronics or industrial control systems.
TLE42764DV50ATMA1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TO-252; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; JESD-609 Code: e3;
TLE4294GV50HTSA1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 4 %; Surface Mount: YES;
TLE4274DV50ATMA2
TLE4274DV50ATMA2 by Infineon is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.5V. It operates in a temperature range from -40°C to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved