Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Body Height: 1.9 mm; Body Length/Diameter: 4 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
ComSIT Distribution GmbH
Vyrian
Modulus Dynamics
$2.237
$2.148
$2.058
Metaverse IC Inc.
Authorized Procurement Solutions
Kepictronics
Perfect Parts
Corphita
Linear Position Sensors SFH9202-3/4 attributes and parameters. Explore more Linear Position Sensors devices from Infineon Technologies
Body Width:
Body Height:
Body Length/Diameter:
Maximum Measurement Range (mm):
Minimum Measurement Range (mm):
Mounting Feature:
No. of Channels:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Circuit Type:
Maximum Output Current:
Output Type:
Package Shape or Style:
Response Time:
Sensors or Transducers Type:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
Maximum VCEsat:
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Formosa Microsemi
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
NXP Semiconductors
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Rectron
Changzhou Galaxy Century Microelectronics
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
IRLML6402TRPBF
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
EEAGA1H4R7
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
HLC1395-002
Honeywell Sensing And Control
Honeywell Sensing And Control's HLC1395-002 is a linear position sensor with a max VCEsat of 0.5V, ideal for applications requiring precise measurements. With a response time of 15us and max output voltage of 30V, it offers accurate and reliable performance in temperature ranges from -40°C to 85°C. The sensor's transistor output circuit type and compact rectangular design make it suitable for various industrial automation and control systems.
EX-32B-PN
Panasonic's EX-32B-PN is a linear position sensor with 26.4V max supply voltage, 11" body width, and PNP output type. Ideal for applications requiring precise measurement within a 50mm range, such as industrial automation systems or robotics.
EE-SPY302
Omron
Omron's EE-SPY302 is a linear position sensor with 5mm measurement range, 24V max supply voltage, and 80mA output range. Ideal for applications requiring precise position sensing in industrial automation systems.
SM312CV2MHSQD
Hans Turck & Kg
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE;
CX-424
Panasonic's CX-424 is a Linear Position Sensor with 26.4V max supply voltage, 11.2" body width, and NPN output type. Ideal for applications requiring precise position sensing in a range of 0-100mm, this sensor operates b/w -25°C to 55°C temperatures with a quick response time of 1000µs.
E3AS-F1500IPD2M
LINEAR POSITION SENSOR,PHOTOELECTRIC,TOF,VCSEL; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Minimum Supply Voltage: 10 V; Output Circuit Type: Open Collector; Response Time: 150000 us;
EX-32A-PN
The Panasonic EX-32A-PN is a linear position sensor with a 50mm measurement range, PNP output type, and 500us response time. Ideal for applications requiring precise distance measurements in industrial settings.
EE-SX4173-P2
LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM;
E3AS-HL150MT5M
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Output Type: PNP, NC/NO; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 28.7 mm; Output Circuit Type: Open Collector; Minimum Supply Voltage: 10 V;
E3S-AD912M
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: BOARD MOUNT; Output Type: PNP; Package Shape or Style: RECTANGULAR; Maximum Supply Voltage: 30 V; Body Width: 12 inch;
SFH9206-6/7
Osram Opto Semiconductors
SFH9206-6/7 by Osram Opto Semiconductors is a linear position sensor with dimensions 3.2" x 4mm x 2mm, operating b/w -40°C to 100°C. It features photoelectric diffuse sensing technology and matte tin over nickel terminal finish. Ideal for surface mount applications requiring precise linear position detection.
TLP908(LB,F)
Toshiba
Linear Position Sensors; Mounting Feature: THROUGH HOLE MOUNT; Maximum VCEsat: .4 V; Output Circuit Type: Transistor; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Current: 50 mA;
Micro Switch
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0.60mA; Response Time: 15 us;
E3T-FT12-M3J0.3M
LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM; Output Type: NPN; Package Shape or Style: RECTANGULAR; Body Height: 15.8 mm; Housing: PBT; Body Length/Diameter: 12 mm;
XUB1BPBNL5
Schneider Electric Sa
SFH9202-3/4
SI7210-B-03-IV
Silicon Labs
LINEAR POSITION SENSOR, HALL EFFECT; Operating Frequency: 400 Hz; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
PM-L65
The Panasonic PM-L65 is a linear position sensor with 5-24V supply voltage range. Featuring through-beam photoelectric sensors, it offers fast response time of 80us and high repeatability of 0.01. Ideal for applications requiring precise position detection in temperatures ranging from -25 to 55°C.
CNY70
Vishay Intertechnology's CNY70 is a linear position sensor with max supply voltage of 1.6V and VCEsat of 0.3V. Ideal for applications requiring precise analog current output in a compact square package, operating b/w -40 to 85 °C with measurement range up to 5mm.
E3Z-D61K-M3J0.3M
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 30 mA; Minimum Operating Temperature: -25 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Body Height: 2 mm; Maximum Operating Temperature: 100 Cel; Body Width: 3.2 inch;
SFH9206
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 100 Cel; Body Length/Diameter: 4 mm; Body Width: 3.2 inch;
SFH9206-5/6
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 4 mm; Minimum Operating Temperature: -40 Cel; Terminal Finish: MATTE TIN OVER NICKEL;
SFH9240-Z
Linear Position Sensors; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e3; Maximum Operating Current: 50 mA; No. of Channels: 1;
SFH902
Linear Position Sensors; Mounting Feature: SURFACE MOUNT; No. of Channels: 1; Gap Size: .005 mm; Maximum Operating Current: 50 mA; JESD-609 Code: e0;
SFH9201-3/4
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 4 mm; Body Width: 3.2 inch;
SFH9202-2/3
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Minimum Measurement Range (mm): 1 mm;
SFH900-1
Linear Position Sensors; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 80 Cel; Maximum Operating Current: 50 mA; Output Circuit Type: Transistor; Minimum Operating Temperature: -40 Cel;
SFH900-4
Linear Position Sensors; Mounting Feature: THROUGH HOLE MOUNT; Maximum Output Voltage: 30 V; Maximum VCEsat: .6 V; Output Circuit Type: Transistor; Maximum Output Current: 10 A;
SFH905-2
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0.50mA; Maximum Measurement Range (mm): 1 mm;
SFH9201-2/3
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Response Time: 50 us; Minimum Measurement Range (mm): 1 mm;
SFH901-2
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 10mA; Minimum Measurement Range (mm): 1 mm;
SFH9202
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; No. of Channels: 1; Termination Type: SOLDER;
SFH900-3
Linear Position Sensors; Mounting Feature: THROUGH HOLE MOUNT; Gap Size: .001 mm; Response Time: 50 us; Maximum VCEsat: .6 V; Maximum Output Voltage: 30 V;
SFH9101
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 3.50mA; Additional Features: DAY LIGHT FILTER;
SFH901
Linear Position Sensors; Mounting Feature: SURFACE MOUNT; Output Circuit Type: Transistor; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Current: 50 mA; Maximum Output Voltage: 30 V;
SFH9102
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0.50mA; Termination Type: SOLDER;
SFH9201
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Minimum Measurement Range (mm): 1 mm; Body Length/Diameter: 4 mm;
SFH905-1
SFH9202-5/6
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Output Range: 10mA; Termination Type: SOLDER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved