Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Orange-Red; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e0;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Modulus Dynamics
$0.146
$0.140
$0.134
Corphita
Visible LEDs LSM670-K2 attributes and parameters. Explore more Visible LEDs devices from Infineon Technologies
Color At Wavelength:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Sub-Category:
Terminal Finish:
Viewing Angle:
LSM670-K2 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDV303N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
Promax-johnton
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Db Lectro
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
CMD15-21VGD/TR8
Chicago Miniature Lighting
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.5; Lens Type: DIFFUSED; Packing Method: TR;
591-3001-002F
Dialight
Dialight's 591-3001-002F is a dual color LED with separate configuration and 2.84 mm size. It has a max forward current of 0.03 A and peak wavelengths of 635/572 nm. This LED is suitable for surface mount applications requiring super red/green illumination.
HSMG-C190
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 9.5; Lens Type: DIFFUSED; Terminal Pitch: 1.3 mm;
158302230
Wuerth Elektronik & Kg
SINGLE COLOR LED;
XHP35B-H0-0000-0D0UB440G
Cree Led
APT1608SGC
Kingbright Electronic
APT1608SGC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with a peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring SUPER BRIGHT GREEN illumination, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
597-3401-407NF
Dialight's 597-3401-407NF is a 2mm SINGLE COLOR LED with peak wavelength of 580nm. It has max forward current of 0.03A and viewing angle of 70°. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
CMD15-21UGC/TR8
Visual Communications Company
CMD15-21UGC/TR8 by Visual Communications Company is a 2mm GREEN LED with peak wavelength of 565nm. It has a max forward current of 0.025A and viewing angle of 140°. Ideal for surface mount applications, this single color LED operates b/w -40 to 85 °C temperatures.
SML-A12UTT86
ROHM
ROHM's SML-A12UTT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 630nm, forward current of 0.03A. Ideal for applications requiring colorless transparent lens, it operates b/w -40 to 85°C and has a luminous intensity of 100mcd.
553-0212-200F
Dialight's 553-0212-200F is a dual color LED array with separate, 2-element configuration. Featuring red/green colors and diffused lens type, it has peak wavelengths of 635nm/565nm. Ideal for applications requiring radial mount LEDs with nominal luminous intensity of 10.0/12.6 mcd at a viewing angle of 60°.
TLUV5300
Vishay Telefunken
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 2.5; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Silver (Sn/Ag);
VLMS1500-GS08
Vishay Intertechnology
VLMS1500-GS08 by Vishay Intertechnology is a 0.5mm SINGLE COLOR LED with peak wavelength of 639nm. It has max forward current of 0.03A and viewing angle of 130°. Ideal for applications requiring SUPER RED illumination in compact spaces.
APT2012SGC
APT2012SGC by Kingbright Electronic is a 1.3mm SUPER BRIGHT GREEN LED with 0.025A forward current, emitting at 565nm peak wavelength. Ideal for surface mount applications, it offers a wide 120° viewing angle and operates b/w -40°C to 85°C temperatures.
150141RS73100
150141RS73100 by Wurth Elektronik is a single color LED with peak wavelength of 630nm and max forward current of 0.03A. With a viewing angle of 120°, it's ideal for applications requiring red light emission in compact spaces. This surface mount LED operates b/w -40 to 85°C, making it suitable for various lighting projects.
597-5312-407NF
Dialight's 597-5312-407NF is a single color LED with peak wavelength of 560nm. It has a max forward current of 0.03A and viewing angle of 152°. Ideal for surface mount applications requiring green light emission in compact spaces.
150060VS75000
150060VS75000 by Wurth Elektronik is a single color LED with peak wavelength of 572nm and viewing angle of 140°. Ideal for applications requiring bright green light, it has a max forward current of 0.03A and operates b/w -40°C to 85°C. Suitable for surface mount installations in various electronic devices.
HSMZ-C190
Broadcom
HSMZ-C190 by Broadcom is a 1mm red LED with peak wavelength of 643nm. It has a max forward current of 0.025A and viewing angle of 170°. Ideal for surface mount applications in electronics, displays, and indicator lights due to its compact size and high luminous intensity.
HLMP-1301-E0002
HLMP-1301-E0002 by Broadcom is a 3mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and nominal luminous intensity of 4.95mcd. Ideal for applications requiring high efficiency red light emission, such as indicator lights in electronic devices.
150066M153000
TRIPLE COLOR LED;
HLMP-1503-D0002
Broadcom's HLMP-1503-D0002 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.03A, it emits high performance green light at 6.15mcd luminous intensity. Ideal for applications requiring radial mounting and a viewing angle of 60°, such as indicator lights in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LSM676-P2R1-1-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LSM676-P2R1-1-Z is a 1.5mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for applications requiring super red light emission, such as indicator lights in automotive or consumer electronics due to its high luminous intensity of 98mcd.
LSM67K-H2L1-1-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.78; Lens Type: COLORLESS CLEAR; Shape: RECTANGULAR;
LSM676-P2S1-1-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 140.0; Lens Type: COLORLESS CLEAR; Size: 1.5 mm;
LSM676-P2R1-1
Infineon Technologies
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .03 A;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 98.0; Lens Type: COLORLESS CLEAR; Terminal Finish: TIN;
LSM676-P2S1-1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 140.0; Lens Type: COLORLESS CLEAR; Terminal Finish: TIN;
LSM676-Q2S1-1
Osram Opto Semiconductors' LSM676-Q2S1-1 is a 1.5mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for applications requiring a super red light source, such as indicator lights in electronic devices due to its high luminous intensity of 157.0mcd and wide viewing angle of 120°.
LSM676-P2
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 645; Maximum Reverse Voltage: 3 V; Height: 1.4 mm;
LSM670-J2L1-1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; Maximum Forward Voltage: 2.6 V; Viewing Angle: 0 deg;
LSM670-L1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 635; Maximum Forward Voltage: 2.6 V; Maximum Operating Temperature: 100 Cel;
LSM676-MQ
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Color: SUPER RED; JESD-609 Code: e0; Maximum Forward Voltage: 2.6 V;
LSM676-P1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; Maximum Operating Temperature: 100 Cel; Peak Wavelength (nm): 645;
LSM670-HK
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 635; Color: SUPER RED; Color At Wavelength: Red;
LSM670-JM
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Size: 1.5 mm; Peak Wavelength (nm): 635; Viewing Angle: 120 deg;
LSM676-N
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Red; Maximum Forward Current: .02 A; No. of Functions: 1;
LSM676-N2
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Orange-Red; JESD-609 Code: e0; Maximum Forward Voltage: 2.5 V;
LSM670-K
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Viewing Angle: 120 deg; Maximum Forward Current: .01 A;
LSM676-N2P2-1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Viewing Angle: 120 deg; Maximum Reverse Voltage: 3 V;
LSM676-NR
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Shape: RECTANGULAR; Maximum Operating Temperature: 100 Cel; No. of Functions: 1;
LSM670-J1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Peak Wavelength (nm): 635; Height: 1.4 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved