Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Operating Mode: ENHANCEMENT MODE; Package Shape: RECTANGULAR; JESD-30 Code: R-PSIP-T3;
Median Price
$1.887
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Verical
$1.775
Digiode
$1.786
Vyrian
Corphita
$1.692
Modulus Dynamics
$2.192
$2.104
$2.017
AZTECH Wire
$2.850
$2.740
$2.680
$2.630
Microchip USA
$11.765
Power Field Effect Transistors (FET) IPI120N06S402AKSA2 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Infineon Technologies
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Element Material:
IPI120N06S402AKSA2 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Dev Wafer Fab 12/Feb/2019
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Dc Components
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
Won-top Electronics
Plessey Semiconductors Discrete Components Div
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
IRF7507TRPBF
Infineon Technologies
IRF7507TRPBF by Infineon Technologies is a Power FET with N-CHANNEL and P-CHANNEL configuration. It has a max drain current of 2.4A, on-resistance of 0.14 ohm, and operates in enhancement mode for switching applications. This transistor is designed for surface mount with a package style of small outline, making it suitable for various electronic devices requiring efficient power management.
FDD4141
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 69 W; Terminal Finish: MATTE TIN; Terminal Position: SINGLE;
IRF4905STRLPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 170 W; Terminal Finish: MATTE TIN OVER NICKEL; Terminal Position: SINGLE;
DMP6023LE-13
Diodes Incorporated
DMP6023LE-13 by Diodes Inc. is a P-channel FET with 60V DS breakdown voltage and 50A IDM for switching applications. It operates in enhancement mode, has a max temp of 150°C, and features a drain-source resistance of 0.028 ohm. Ideal for automotive use due to AEC-Q101 standard compliance.
RJK0651DPB-00#J5
Renesas Electronics
Renesas Electronics RJK0651DPB-00#J5 is a N-channel FET with 60V DS breakdown voltage, ideal for switching applications. Features include 100A max pulsed drain current, 11.7mJ avalanche energy rating, and 0.018 ohm max drain-source resistance. Its small outline package and nickel palladium gold finish make it suitable for high-power enhancement mode operations up to 150°C.
SI7415DN-T1-GE3
SI7415DN-T1-GE3 by Vishay Intertechnology is a P-CHANNEL power FET with a min DS breakdown voltage of 60V. It is used for switching applications and has a max drain current of 3.6A and max power dissipation of 3.8W.
FDD6685
FDD6685 by Onsemi is a P-CHANNEL Power FET with 30V DS Breakdown Voltage and 11A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, GULL WING terminals, and operates in ENHANCEMENT MODE. With a max power dissipation of 52W and peak reflow temperature of 260°C, it offers reliable performance in various electronic devices.
CSD88537NDT
CSD88537NDT by Texas Instruments is an N-channel power FET with 60V DS breakdown voltage, ideal for switching applications. It features separate elements with built-in diode, 108A max pulsed drain current, and 0.019ohm max drain-source resistance. This MOSFET operates in enhancement mode, has a small outline package style, and can withstand temperatures from -55 to 150°C.
IRLR3110ZTRPBF
IRLR3110ZTRPBF by Infineon is a N-CHANNEL FET with 100V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode, capable of handling up to 250A pulsed drain current. With 0.014 ohm max on-resistance and 175°C max operating temp, it's suitable for high-power systems.
AUIRF7759L2TR
AUIRF7759L2TR by Infineon is a N-CHANNEL FET with 75V DS Breakdown Voltage and 640A Pulsed Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 0.0023 ohm On Resistance, and operates in ENHANCEMENT MODE.
IRFH4253DTRPBF
Infineon's IRFH4253DTRPBF is a N-CHANNEL Power FET with 35A Max Drain Current and 50W Max Power Dissipation. Ideal for high-power applications, it operates up to 150°C, featuring METAL-OXIDE SEMICONDUCTOR tech in a surface-mount package.
ZXMP6A13GTA
Zetex Plc
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Qualification: Not Qualified; Minimum DS Breakdown Voltage: 60 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
IRLML5203TRPBF
Infineon's IRLML5203TRPBF is a P-CHANNEL FET for SWITCHING applications. Features include 30V DS Breakdown Voltage, 24A IDM, and 0.098 ohm RDS(on). With a small outline package style and -55 to 150 °C operating range, it's ideal for power management in various electronic devices.
IRFP4468PBF
IRFP4468PBF by Infineon is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It has a max IDM of 1120A and EAS of 740mJ, ideal for SWITCHING applications. With 0.0026 ohm RDS(on) and 520W Pdiss, it operates in ENHANCEMENT MODE at up to 175°C.
BSZ160N10NS3GATMA1
Infineon Technologies' BSZ160N10NS3GATMA1 is a power FET with N-channel configuration and a built-in diode. It is suitable for switching applications, offering a min DS breakdown voltage of 100V and max pulsed drain current of 160A. Its small outline package style and high operating temperature make it ideal for various electronic devices.
SQJ431EP-T1_GE3
Vishay Intertechnology's SQJ431EP-T1_GE3 is a P-CHANNEL FET with 200V DS Breakdown Voltage, 40A IDM, and 0.221 ohm RDS(ON). Ideal for power applications requiring high drain current and low on-resistance in a small outline package.
IRLML6344TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
IRFP260NPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Qualification: Not Qualified; Transistor Application: SWITCHING;
FQB47P06TM_AM002
Fairchild Semiconductor's FQB47P06TM_AM002 is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 188A IDM, 820mJ EAS, and 0.026 ohm RDS(ON). With a max power dissipation of 160W and operating temperature up to 175°C, it offers reliable performance in various electronic systems.
SPP08N80C3
SPP08N80C3 by Infineon Technologies is a power FET with a min DS breakdown voltage of 800V. It has a max pulsed drain current of 24A and an avalanche energy rating of 340mJ. This N-channel transistor is commonly used in applications requiring high power dissipation and temperature resistance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IPI100N08S2-07
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; JEDEC-95 Code: TO-262AB; Minimum DS Breakdown Voltage: 75 V;
IPI100N06S303AKSA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JESD-30 Code: R-PSIP-T3; Additional Features: AVALANCHE RATED; Maximum Pulsed Drain Current (IDM): 400 A;
IPI100N04S403DXKSA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; JESD-30 Code: R-PSIP-T3; Avalanche Energy Rating (EAS): 320 mJ;
IPI100N08N3GHKSA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Avalanche Energy Rating (EAS): 90 mJ; JESD-30 Code: R-PSIP-T3;
IPI100N06S3L-03
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Maximum Pulsed Drain Current (IDM): 400 A; No. of Elements: 1;
IPI100N04S4H2XK
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Terminals: 3; Operating Mode: ENHANCEMENT MODE; Package Shape: RECTANGULAR;
IPI100N08S207AKSA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Avalanche Energy Rating (EAS): 810 mJ; Transistor Element Material: SILICON; Package Style (Meter): IN-LINE;
IPI100N04S303AKSA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JESD-30 Code: R-PSIP-T3; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Form: THROUGH-HOLE;
IPI100N06S3-04
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 214 W; Avalanche Energy Rating (EAS): 450 mJ; Terminal Form: THROUGH-HOLE;
IPI100N04S4-H2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Drain-Source On Resistance: .0027 ohm; Package Style (Meter): IN-LINE; Terminal Form: THROUGH-HOLE;
IPI100N08N3G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 100 W; Package Style (Meter): IN-LINE; Maximum Drain-Source On Resistance: .01 ohm;
IPI100N06S3L03AKSA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Pulsed Drain Current (IDM): 400 A; Avalanche Energy Rating (EAS): 690 mJ; Package Style (Meter): IN-LINE;
IPI100N04S4-H2M
Power Field-Effect Transistors;
IPI100N08N3GXKSA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Terminals: 3; JESD-609 Code: e3; Peak Reflow Temperature (C): NOT SPECIFIED;
IPI100N04S4-03D
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 231 W; Terminal Position: SINGLE; JEDEC-95 Code: TO-262AA;
IPI100N06S3-03
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; JESD-609 Code: e3; No. of Terminals: 3;
IPI100N04S3-03
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 214 W; Terminal Position: SINGLE; Package Shape: RECTANGULAR;
IPI100N04S303MATMA1
IPI100N04S4H2AKSA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JEDEC-95 Code: TO-262AA; Maximum Drain Current (ID): 100 A; Terminal Position: SINGLE;
IPI100N06S3L-04
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 214 W; JESD-609 Code: e3; Package Style (Meter): IN-LINE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved