Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND LOW POWER; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Supply Current: 8 mA; Maximum Input Power (CW): 0 dBm; Terminal Finish: TIN;
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Bristol Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Cogito LLC
Vyrian
Digiode
Prism Electronics
Modulus Dynamics
$0.802
$0.770
$0.738
Andel Nordic
$14.090
$9.861
Kepictronics
A-Z Elektronik GmbH
Alle Elektronik GmbH
Assy Fe
Northwest PG Solutions
Native Components
Perfect Parts
Corphita
RF & Microwave Amplifiers BGA420 attributes and parameters. Explore more RF & Microwave Amplifiers devices from Infineon Technologies
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
Terminal Finish:
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Electronic Devices
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
Transys Electronics
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Taiwan Semiconductor
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
MSA-1105-TR1
Agilent Technologies
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Supply Current: 70 mA;
SGA-3363-TR1
Rf Micro Devices
SGA-3363-TR1 by Rf Micro Devices is a wide band low power RF amplifier with 15.5 dB gain, operating from 0 to 3600 MHz. It has a max input power of 5 dBm and VSWR of 1.2, suitable for RF & microwave applications requiring high performance in temperatures ranging from -40°C to 85°C.
MW7IC930NR1
NXP Semiconductors
The NXP Semiconductors MW7IC930NR1 is a MOS RF amplifier with 33 dB gain, operating b/w 920-960 MHz. It has a max input power of 20 dBm and VSWR of 10, suitable for narrowband high-power applications at 28V supply voltage.
GALI-6
Mini-circuits
The Mini-circuits GALI-6 is a wide band low power RF amplifier with 10 dB gain and 50 ohm impedance. It operates from 0 to 4000 MHz, handling up to 20 dBm CW input power. Ideal for surface mount applications in RF & microwave systems, it offers VSWR of 2 and operates b/w -45°C to +85°C.
HMC8500PM5E
Analog Devices
Analog Devices' HMC8500PM5E is a GAN RF amplifier with 12dB gain, operating from 10MHz to 2800MHz. It has a max input power of 33dBm and VSWR of 6, suitable for wideband high-power applications. The component features a plastic/epoxy package, surface mounting, and operates at temperatures ranging from -40°C to 85°C.
HMC499
Hittite Microwave
WIDE BAND MEDIUM POWER; Maximum Input Power (CW): 20 dBm; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm; Gain: 12 dB; Minimum Operating Frequency: 21000 MHz;
MAX2611EUS+T
Maxim Integrated
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Additional Features: LOW NOISE; JESD-609 Code: e3;
ADL5545ARKZ-R7
ADL5545ARKZ-R7 by Analog Devices is a wide band medium power RF amplifier with 24.8 dB gain and 50 ohm impedance. It operates from 30 MHz to 6 GHz, with a max input power of 18 dBm. This component is ideal for RF and microwave applications requiring high performance in a compact surface mount package.
ABA-52563-BLKG
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Additional Features: HIGH RELIABILITY;
HMC372LP3E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
BGU7004,115
The NXP Semiconductors BGU7004,115 is a RF & Microwave Amplifier with 6 terminals and AEC-Q100 screening. Operating voltage of 1.8V, max supply current of 14.4mA, and temp range from -40 to 125°C make it ideal for automotive applications. Its surface mount package body material is plastic/epoxy with tin terminal finish.
HMC505LP4TR
Analog Devices' HMC505LP4TR is a RF amplifier with 24 terminals, operating from -40 to 85°C. It has a voltage supply of 3V and uses bipolar technology for narrowband low-power applications. The package body material is plastic/epoxy, suitable for surface mounting.
MGA-81563-BLKG
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC998APM5E
HMC998APM5E by Analog Devices is a wide band medium power RF amplifier with 13 dB gain and 27 dBm max input power. It operates from 0 to 22000 MHz, suitable for various RF applications. With a VSWR of 7, it offers reliable performance in temperatures ranging from -40 to 85°C.
NPA1003QAR
Nitronex
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; No. of Functions: 1; Package Equivalence Code: LCC16,.16SQ,25;
HMC460LC5
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Frequency: 0 MHz;
BGU8009,115
NXP Semiconductors' BGU8009,115 is a RF & Microwave Amplifier with 6 terminals and PLASTIC/EPOXY package. It operates b/w -40 to 85 °C with power supplies of 1.8/2.85 V. Ideal for surface mount applications in various electronic devices.
SP9711
Amplifonix
WIDE BAND LOW POWER; Minimum Operating Frequency: 1000 MHz; Maximum Operating Frequency: 2000 MHz; Maximum Input Power (CW): 10 dBm; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT;
MAX2691EWS+T
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; No. of Functions: 1;
MGA-61563-TR1G
Broadcom
Broadcom's MGA-61563-TR1G is a GAAS RF amplifier with 6.9 dB gain, operating from 100 MHz to 6000 MHz. It has a max input power of 18 dBm and VSWR of 2, suitable for wideband low-power applications in RF and microwave systems. The component features a plastic/epoxy package, matte tin terminals, and operates on 3-5V with a supply current of 48 mA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BGA420H6327XTSA1
Infineon Technologies
WIDE BAND LOW POWER; JESD-609 Code: e3; Terminal Finish: TIN; Gain: 11 dB; Maximum Operating Temperature: 150 Cel; Maximum Input Power (CW): 0 dBm;
BGA427H6327XTSA1
NARROW BAND MEDIUM POWER; Gain: 18.5 dB; JESD-609 Code: e3; Maximum Input Power (CW): -10 dBm; Minimum Operating Frequency: 100 MHz; Construction: COMPONENT;
BGA428
NARROW BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: TSSOP6,.08; Characteristic Impedance: 50 ohm;
BGA420E6327HTSA1
NARROW BAND LOW POWER; JESD-609 Code: e3; Minimum Operating Temperature: -65 Cel; Gain: 11 dB; Minimum Operating Frequency: 100 MHz; Maximum Operating Temperature: 150 Cel;
BGA425
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 3;
BGA427-E6433
RF/Microwave Amplifiers; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Supply Current: 9.4 mA; Power Supplies (V): 3; Package Equivalence Code: SOT-343R;
BGA420E6327
NARROW BAND LOW POWER; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Frequency: 100 MHz; Terminal Finish: Matte Tin (Sn); No. of Functions: 1;
BGA428-E6327
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 2.7; Package Equivalence Code: TSSOP6,.08;
BGA416E6327HTSA1
WIDE BAND LOW POWER; Minimum Operating Frequency: 900 MHz; Maximum Operating Temperature: 150 Cel; Construction: COMPONENT; Maximum Input Power (CW): 8 dBm; JESD-609 Code: e3;
BGA425E6327
NARROW BAND LOW POWER; Maximum Input Power (CW): -10 dBm; Maximum Operating Frequency: 1800 MHz; Maximum Operating Temperature: 150 Cel; Gain: 18.5 dB; Minimum Operating Temperature: -65 Cel;
BGA420E6327XT
WIDE BAND LOW POWER; Gain: 11 dB; Minimum Operating Temperature: -65 Cel; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 150 Cel; Characteristic Impedance: 50 ohm;
BGA427
NARROW BAND MEDIUM POWER; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT; Minimum Operating Frequency: 100 MHz; Maximum Supply Current: 9.4 mA;
BGA427E6327XT
NARROW BAND MEDIUM POWER;
BGA420H6327
RF/Microwave Amplifiers; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; No. of Functions: 1; Minimum Operating Temperature: -65 Cel; Power Supplies (V): 3;
BGA427E6327
NARROW BAND MEDIUM POWER; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; No. of Functions: 1; JESD-609 Code: e3; Power Supplies (V): 3;
BGA420H6433
WIDE BAND LOW POWER;
BGA416
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Temperature: 150 Cel;
BGA420-E6433
RF/Microwave Amplifiers; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 3; Maximum Operating Temperature: 150 Cel; Maximum Supply Current: 8 mA;
BGA427E6327HTSA1
NARROW BAND MEDIUM POWER; Gain: 28.5 dB; Terminal Finish: MATTE TIN; Maximum Input Power (CW): -10 dBm; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 1800 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved