Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Honeywell MS-27216-2 snap action switch has a body width of 6.35in and is hermetically sealed for corrosion protection. With SPDT switch function, it operates b/w -65°C to 125°C, handling up to 2A AC and 4A DC current. Ideal for panel mounting applications requiring momentary switch action with wire termination.
Median Price
$757.375
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Master Electronics
1+ parts
$751.790
100+ parts
-
1k+ parts
10k+ parts
TTI
$762.960
$716.960
IBS Electronics
$1,075.774
Vyrian
Nova Conductors
FDH Electronics
Bisco
AZTECH Wire
$2.710
$2.600
$2.550
$2.500
Aranea Global
The wide body design provides stability and durability to the switch, making it suitable for various applications.
The corrosion-proof and hermetically sealed design ensures the switch can withstand harsh environments and provides long-lasting performance.
The single-pole double-throw function allows the switch to control two separate circuits, increasing its versatility and functionality.
With a high maximum operating temperature, this switch can be used in demanding industrial settings without any performance issues.
The high AC contact current rating allows the switch to control heavy loads efficiently, making it ideal for various power applications.
The low minimum operating temperature ensures the switch remains operational even in extremely cold conditions, providing reliability in diverse environments.
The precise actuator travel distance ensures accurate switch operation, minimizing the risk of errors and enhancing overall performance.
The high DC contact voltage rating allows the switch to handle voltage fluctuations effectively, ensuring consistent performance in different electrical systems.
The snap acting and limit switch design provides quick and reliable switching action, making this switch suitable for applications that require fast response times.
The high AC maximum rating load for contacts ensures the switch can handle large electrical loads, making it suitable for heavy-duty applications.
The compact body length/diameter size makes the switch easy to install in tight spaces or on crowded panels, maximizing usability in various setups.
The moderate operating force required for the switch ensures smooth and ergonomic operation, reducing user fatigue and enhancing user experience.
The high DC maximum rating load for contacts allows the switch to handle heavy DC currents efficiently, making it suitable for power control applications.
The high DC contact current rating enables the switch to control large DC loads without overheating or damage, ensuring reliable performance in demanding conditions.
The momentary switch action provides temporary contact closure, making it ideal for applications that require short-term activation or signaling.
The wire termination type allows for easy and versatile installation, enabling the switch to be connected to various electrical systems without any compatibility issues.
The high AC contact voltage rating ensures the switch can handle standard voltage levels effectively, making it suitable for a wide range of AC applications.
The minimal pre-travel distance ensures immediate switch activation, reducing response time and enhancing overall system efficiency.
The panel mount feature allows for secure and stable installation on panels or surfaces, ensuring the switch stays in place during operation, making it suitable for industrial settings.
Snap Action & Limit Switches MS-27216-2 attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Actuator Travel (mm):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
MS-27216-2 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
EU2B-YS3203F
Idec
ROTARY SWITCH;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
XCKP2102G11
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
LSA2B-2D
Honeywell Sensing And Control
LSA2B-2D by Honeywell is a DPDT snap action/limit switch with IP65-67 sealing. It operates b/w -12°C to 121°C, handling up to 10A@600VAC. Ideal for panel mounting applications requiring momentary switch action in various industries.
SS-01GL2-F
Omron
Omron SS-01GL2-F is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator type, it has IP40 sealing and operates b/w -25 to 85 °C. Ideal for panel mounting applications, it offers 0.1A@125VAC AC max rating and 0.1A@30VDC DC max rating.
BZ-2RQ124-D6
BZ-2RQ124-D6 by Honeywell is a SPDT snap action/limit switch with 17.45" body width, 23.62mm height, and 5.94mm actuator travel. It operates at a max temperature of 121°C, handles up to 15A@480VAC AC load, and 0.5A@125VDC DC load. Ideal for panel mounting applications requiring momentary switch action with quick connect termination.
D2F-01L2-D
Omron's D2F-01L2-D is a SPDT snap action/limit switch with 30VDC contact voltage and 1.47N operating force. With IP40 sealing, it has an electrical life of 30000 cycles and operates b/w -25°C to 65°C. Ideal for panel mounting applications requiring momentary switch action with solder termination.
ESE23F001
Panasonic
111SM602-H4
The Honeywell 111SM602-H4 is a SPDT snap action/limit switch with a roller lever actuator. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with quick connect termination.
D2VW-5L1B-1M
SS-5GL2-F-3T
111SM1-T2
111SM1-T2 by Honeywell is a SPDT snap action/limit switch with 5A@250VAC rating. Featuring a straight lever actuator, it has an operating force of 1.9599N and an actuator travel of 5.588mm. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
914CE31-9V
914CE31-9V by Honeywell Sensing And Control is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It has IP66; IP67; IP68 sealing, suitable for PANEL MOUNT applications. With a max AC contact current of 5A@250VAC and operating temperature range from 0 to 105 °C, it offers reliable performance in various industrial settings.
ZCKM1H29
D4SL-N4RFA-D
ZCMD21L08R12
BZE6-2RN4
BZE6-2RN4 by Honeywell is a snap action/limit switch with SPDT function, IP54 sealing, and 15A@480VAC AC max rating. It has a lever actuator type, 10.34mm travel, and 5.56N max operating force. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
WW1A24A-D8
WW1A24A-D8 by Honeywell is a 17.53" wide snap action/limit switch with SPST function, 40mm height, and 3A@125VAC AC contact current. Featuring a plunger lever actuator type, it has 5mm travel and quick connect termination. Ideal for panel mounting applications requiring momentary switch action at up to 125V AC voltage.
311SM6
311SM6 by Honeywell is a SPDT snap action/limit switch with a body width of 6.35in and max operating temperature of 121°C. It has a max AC contact current of 5A and is suitable for panel mounting applications requiring momentary switch action.
111SM858-H403
111SM858-H403 by Honeywell Sensing And Control is a SPDT snap acting/limit switch with 10.16" body width and corrosion proof sealing. It has a max AC contact current of 5A@250VAC, suitable for applications requiring momentary switch action and lever actuator type.
XCG13-L1
Johnson Electric Group
Snap Acting/Limit Switches;
TMCGF5ST1540Y
Itt Cannon
TMCGF5ST1540Y by ITT Cannon is a SPST snap action/limit switch with 10.2" width, 15.7mm height, and -55 to 150°C operating temperature range. It features a high force lever actuator, 1A@30VDC contact current/voltage ratings, and quick connect termination. Ideal for panel mounting applications requiring momentary switch action in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MS27240-1
MS27240-1 by Honeywell Sensing And Control is a corrosion-proof DPDT snap action/limit switch with 25.4mm body height and 4.2mm plunger actuator travel. It has a max DC contact voltage of 28V, current rating of 7A@28VDC, and operating force of 53.38N. Ideal for panel mount-threaded applications requiring momentary switch action with wire termination type.
MS27240-4
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): ROLLER TYPE; Actuator Travel (mm): 4.2; Body Length/Diameter: 25.4 mm;
MS-27994-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Switch Action: MOMENTARY; Maximum Operating Force: 4.73 N;
MS27994-1
Defense Logistics Agency
MS27994-1 by Defense Logistics Agency is a SPDT snap action/limit switch with 25000 cycles electrical life. It has a body width of 8.28in and sealing with epoxy terminal seal for usage in panel mount applications at temperatures ranging from -55 to 85°C.
MS27216-6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; DC Maximum Rating R Load (Contact): .5A@28VDC; Body Length/Diameter: 20.04 mm; Termination Type: SOLDER;
MS-27216-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SPHERICAL HEAD TYPE; DC Maximum Rating R Load (Contact): 4A@28VDC; Maximum Pre Travel: .76 mm;
MS27240-2
Otto Engineering
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): PIN PLUNGER; Switch Action: MOMENTARY; Body Height: 30.48 mm;
MS27240-7
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): ROLLER TYPE; Maximum DC Contact Current: 1 A; Body Height: 25.4 mm;
MS-27216-4
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Body Height: 17.02 mm; Maximum AC Contact Current: 2 A; DC Maximum Rating R Load (Contact): 4A@28VDC;
MS27216-5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; DC Maximum Rating R Load (Contact): 3A@28VDC; Body Length/Diameter: 20.04 mm; AC Maximum Rating R Load (Contact): 1A@115VAC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved