Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TOGGLE SWITCH; Manufacturer Series: NT;
Median Price
$50.050
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
Ampacity Inc.
$10.100
AZTECH Wire
$18.149
Netroflash
$47.547
$46.546
Toggle Switches 32NT391-70-C08 attributes and parameters. Explore more Toggle Switches devices from Honeywell Sensing And Control
Manufacturer Series:
Switch Type:
32NT391-70-C08 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
Itt Semiconductor
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
MS27723-22
Honeywell Sensing And Control
MS27723-22 by Honeywell is a SPST toggle switch with dust-proof sealing. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for panel mounting applications, this lever actuated switch operates at temperatures up to 71°C.
1-1437558-2
Tyco Electronics Elcon
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG BAT; Body Length/Diameter: 13 mm; Maximum DC Contact Voltage: 28 V;
101TL2-2D
The Honeywell Sensing And Control 101TL2-2D Toggle Switch features SPDT switch function, dust-proof and water-proof sealing, with a body width of 15.75in. It has a max AC contact current of 7.5A@115VAC and DC contact voltage of 30V, suitable for panel mount-threaded applications requiring a locking type actuator.
631NT91-7
631NT91-7 by Honeywell is a DPST toggle switch with dust and water-proof sealing. It has a max AC contact current of 10A@277VAC, suitable for panel mounting applications. With dimensions of 15.75" x 34.79mm x 28.45mm, it operates at temperatures up to 71°C, making it ideal for industrial settings.
MS24523-27
Defense Logistics Agency
MS24523-27 by Defense Logistics Agency is a SPDT toggle switch with 15A@115VAC AC and 15A@28VDC DC max ratings. It features environmentally sealed design, toggle lever actuator, and screw termination. Ideal for panel mount-threaded applications requiring momentary switch action.
12TL1-3F
12TL1-3F by Honeywell Sensing And Control is a SPDT toggle switch with a body width of 23.11in and sealing for dust and water proofing. It has a max operating temperature of 71°C, AC contact current of 15A, and DC contact voltage of 28V. Ideal for applications requiring a latched switch function, such as panel-mounted threaded installations in environments where protection against dust and water is essential.
8800K16
Eaton Corporation
Eaton Corporation's 8800K16 Toggle Switch features SPDT switch function, 10A AC contact current at 115VAC, and 20A DC contact current at 28VDC. With a standard lever actuator, it is ideal for panel mount-threaded applications requiring latched switch action in temperatures ranging from -18°C to 66°C.
4-1825136-5
TE Connectivity
TE Connectivity 4-1825136-5 Toggle Switch offers 6000 cycles electrical life, SPDT switch function, and 1000000000 ohm insulation resistance. Ideal for panel mounting applications with a max AC contact voltage of 125V and DC contact current of 5A@28VDC.
M83731/10-231
M83731/10-231 by Defense Logistics Agency is a DPDT toggle switch with 10000 cycles electrical life. It features EPOXY terminal sealing, gold terminal finish, and lever actuator type. With a max operating temperature of 71°C, it is ideal for panel mounting applications requiring a latched switch action at up to 5A@125VAC or 5A@28VDC.
MS24523-28
Safran Group
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: OFF-(ON); Sealing: ENVIRONMENTALLY SEALED;
1TL133-3
1TL133-3 by Honeywell Sensing And Control is a SPDT toggle switch with a body width of 15.75in and sealing for dust and water proofing. It has a max AC contact current of 15A@125VAC, DC contact current of 20A@28VDC, and operates at temperatures up to 71°C. Ideal for panel mounting applications requiring a latched switch action with screw termination type.
MS90310-211
Otto Engineering
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): LEVER; Minimum Operating Temperature: -55 Cel; Switch Action: LATCHED;
8512K2
The Eaton Corporation 8512K2 Toggle Switch features a 4PST switch function with an electrical life of 20000 cycles. With IP66/67 sealing, it is environmentally sealed for rugged applications. It has a max AC contact current of 11A@115VAC and is ideal for panel mount-threaded installations in harsh environments.
MS24524-23
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Length (Bushing): .47 inch;
11146AGK26
Apem Components
11146AGK26 by Apem Components is a brass toggle switch with 50000 cycles electrical life and 1000000000 ohm insulation resistance. It has a max AC contact current of 2A, making it suitable for applications requiring reliable switching in harsh environments. With a sealing of epoxy and insulator material of diallyl phthalate, this toggle switch is ideal for panel mounting in industrial machinery.
A201MYZQ04
TE Connectivity's A201MYZQ04 Toggle Switch offers 6000 cycles electrical life, 1000000000 ohm insulation resistance, and DPDT switch function. Ideal for applications requiring a latched ON-ON contact function with a max AC voltage of 125V and DC current of 5A@28VDC.
11NT1-3D
11NT1-3D by Honeywell Sensing And Control is a toggle switch with a body width of 15.75in and a body height of 29.46mm. It has a max AC contact current of 15A and is dust-proof and water-proof, making it suitable for panel mount-threaded applications requiring a latched switch action.
4TL1-3D
4TL1-3D by Honeywell Sensing And Control is a 4PDT toggle switch with dust-proof sealing. It has a max AC contact current of 15A@115VAC and DC contact current of 20A@28VDC. Ideal for panel mounting applications, this switch features a standard lever actuator and latched switch action.
C3900BA
Bulgin
The Bulgin C3900BA toggle switch features IP67 sealing, SPST switch function, and 20A@277VAC AC max rating. With a body width of 14", it is ideal for panel mount-threaded applications requiring a durable metal lever actuator and quick connect termination. This switch offers high insulation resistance of 20M ohm and can handle up to 14A@36VDC DC max rating.
8295K107
Eaton Corporation's 8295K107 is a SPST toggle switch with a lever actuator. It has a max DC contact voltage of 250V and current rating of 3A@250VDC. Ideal for panel mounting applications, featuring latched switch action and screw termination type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
32NT391-1-C08
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): SPECIAL DESIGN LEVER; AC Maximum Rating R Load (Contact): 15A@277VAC; Maximum DC Contact Voltage: 28 V;
32NT392-7-C08
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Body Height: 36.12 mm; AC Maximum Rating R Load (Contact): 10A@277VAC;
32NT391-7-C08
32NT391-7-C08 by Honeywell is a DPDT toggle switch with max AC contact current of 10A@277VAC and DC contact current of 18A@28VDC. Featuring a special design lever actuator, it is ideal for panel mount applications requiring momentary switch action.
32NT392-12-C08
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): SPECIAL DESIGN LEVER; Maximum DC Contact Current: 15 A; Maximum DC Contact Voltage: 28 V;
32NT91-7
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Contact Function: (ON)-OFF-(ON); Diameter (Bushing): .427 inch;
32NT391-7-A02
32NT91-2
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Body Height: 25.15 mm; Maximum AC Contact Voltage: 277 V;
32NT91-3
32NT91-3 by Honeywell Sensing And Control is a DPDT toggle switch with dust and water-proof sealing. It has a max AC contact current of 15A@277VAC, making it suitable for panel mount-threaded applications requiring a latched switch action. The switch operates within a temperature range of -40 to 71°C, with silver alloy contacts ensuring reliable performance.
32NT91-70
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Switch Action: MOMENTARY; Termination Type: QUICK CONNECT;
32NT1-3
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Body Width: 22.61 inch; Body Length/Diameter: 33.53 mm;
32NT91-1
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; AC Maximum Rating R Load (Contact): 15A@277VAC; Maximum Operating Temperature: 71 Cel;
32NT91-61-JLG
32NT391-12-C08
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): SPECIAL DESIGN LEVER; Maximum DC Contact Current: 15 A; Maximum AC Contact Current: 15 A;
32NT391-1-C02
32NT391-2-C07
32NT391-3-C07
32NT391-3-C08
32NT391-51-A01
32NT391-7-C07
32NT391-72-C08
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved