Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
2TL1-10 by Honeywell Sensing And Control is a DPDT toggle switch with a body width of 23.11in and a body height of 34.29mm. It has a max operating temperature of 71°C and can handle a max AC contact current of 15A@125VAC. This toggle switch is suitable for panel mount-threaded applications requiring latched switch action.
Median Price
$60.260
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Arrow
1+ parts
$39.560
100+ parts
$35.700
1k+ parts
$35.470
10k+ parts
-
TTI
$43.440
$38.990
$38.220
Relay Specialties
$46.500
$38.750
Chip1Stop
$48.500
Powell Electronics
$50.260
$38.290
Master Electronics
$59.430
$49.980
$49.860
RS Americas
$46.400
Newark
$64.680
$51.430
$50.400
Mouser Electronics
$65.720
$50.860
Peerless Electronics
$68.000
$54.500
RS (Exports)
$69.630
$53.610
DigiKey
$70.960
Verical
$76.200
$59.694
Bristol Electronics
$24.000
Carlton-Bates
$47.480
Nova Conductors
$48.760
TME
$56.260
Electro Sonic
$61.110
$46.260
$44.990
FDH Electronics
$75.089
$53.635
$48.971
$48.271
IBS Electronics
$83.514
$69.273
$68.427
Vyrian
VNN
Kallista Electronics Ltd
Sunrise Surplus Inc.
Lakeland Logistics Inc
Jaybe Electronics
Elcom Components
Extreme Components
Advanced Electronics
$5.443
$4.953
$4.463
Ampacity Inc.
$36.920
Aranea Global
$47.785
$45.873
Continental Prestige Electronics
Allen Electronics Distributors
$57.990
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Argo Parts USA
Assy Fe
Perfect Parts
Wide body design provides durability and stability, making it suitable for heavy-duty applications.
Ensures reliable performance even in dusty or wet environments, making it ideal for outdoor or industrial use.
Offers double pole, double throw capability for versatile control and configuration options.
Compact size allows for easy installation and integration into various equipment or control panels.
Can operate efficiently in high-temperature environments, ensuring reliability and safety.
High current rating enables the switch to handle heavy electrical loads with ease.
The lever actuator provides a tactile and easy-to-use interface for effortless switching between positions.
Designed to handle up to 28 volts of direct current, making it suitable for use in low-voltage applications.
Classic toggle switch design offers simple and reliable On/Off control, making it a popular choice for a wide range of applications.
Can handle up to 15 amps of alternating current at 125 volts, making it suitable for powering various devices or lighting systems.
Compact and space-saving design enables easy installation in tight spaces or crowded control panels.
Capable of handling up to 20 amps of direct current at 28 volts, making it suitable for use in automotive or electronic applications.
High current capacity ensures reliable and efficient performance when dealing with heavy loads or demanding electrical circuits.
Features a latching mechanism for maintaining stable switch positions, providing convenience and precise control.
Screw terminals allow for secure and easy wiring connections, ensuring reliable electrical conductivity.
Designed to handle up to 125 volts of alternating current, making it suitable for a wide range of residential or commercial applications.
Threaded mounting feature allows for secure and stable installation onto panels or enclosures, ensuring proper fit and alignment.
Toggle Switches 2TL1-10 attributes and parameters. Explore more Toggle Switches devices from Honeywell Sensing And Control
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Mounting Feature:
Maximum Operating Temperature:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
2TL1-10 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Philips Semiconductors
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
Formosa Microsemi
5637MAKB
Apem Components
5637MAKB by Apem Components is a SPDT toggle switch with 50000 cycles electrical life, 7" body width, and EPOXY TERMINAL SEALED sealing. Ideal for applications requiring a momentary switch action, it has a max DC contact voltage of 30V and operates b/w -40°C to 85°C. Suitable for panel mounting with solder termination.
MTA306D
TE Connectivity
TE Connectivity's MTA306D is a 3PDT toggle switch with 60000 cycle electrical life and 1000000000 ohm insulation resistance. With a max AC contact current of 6A, it is ideal for applications requiring ON-ON contact function and panel mounting. The switch operates b/w -20 to 80 °C, featuring gold terminal finish and copper alloy end contact material.
6FA54-73
Carling Technologies
The Carling Technologies 6FA54-73 is a SPST toggle switch with 25000 cycles electrical life. It has a max AC contact current of 15A@125VAC and operates b/w -18 to 66 °C. Ideal for panel mounting applications, this BAT TYPE switch features a MOMENTARY action with SCREW termination type.
E103MD1ABE
Itt Cannon
E103MD1ABE by ITT Cannon is a SPDT toggle switch with gold over nickel plating, suitable for ON-OFF-ON functions. With a 40000 cycle electrical life and 1000000000 ohm insulation resistance, it operates at temperatures ranging from -30 to 85 °C. Its GLASS FILLED NYLON housing material and solderable terminals make it ideal for various applications requiring reliable switching capabilities.
1TL5-1
Honeywell Sensing And Control
1TL5-1 by Honeywell Sensing And Control is a SPDT toggle switch with a body width of 15.75in and sealing for dust and water proofing. It has a max AC contact current of 15A@277VAC, making it suitable for panel mount-threaded applications requiring latched switch action.
8573K10-20
Safran Group
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): LOCKING LEVER; Maximum DC Contact Voltage: 28 V; Maximum AC Contact Voltage: 115 V;
MS25307-222
Eaton Corporation
Eaton Corporation's MS25307-222 is a DPST toggle switch with 20000 cycles electrical life. It has a body width of 25.78 inch and sealing for environmental protection. Ideal for applications requiring a latched switch with screw termination, rated at 25A@115VAC and 25A@28VDC in harsh environments.
8868K7
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): LEVER; Electrical Life: 20000 Cycle(s); Maximum AC Contact Voltage: 115 V;
110-73
The Carling Technologies 110-73 Toggle Switch has an electrical life of 25k cycles, insulation resistance of 100M ohm, and max AC contact current of 6A. Ideal for applications requiring a SPST switch with quick-make/-break contact timing, such as panel-mounted threaded installations in electronic devices.
AR3S01GY30/304N1V200
C & K Components
TOGGLE SWITCH;
1TL176-3
1TL176-3 by Honeywell Sensing And Control is a SPDT toggle switch with a lever actuator. It has a body width of 15.75" and sealing for dust and water proofing. With max AC contact current of 15A@125VAC, it is ideal for panel mount-threaded applications requiring latched switch action.
MS27407-2
The Eaton Corporation MS27407-2 is a DP3T toggle switch with an electrical life of 20,000 cycles. It is environmentally sealed and has a max operating temperature of 71°C. Ideal for applications requiring a latched and momentary switch action, it can handle up to 15A@115VAC AC loads and 20A@28VDC DC loads.
2-1825142-5
TE Connectivity 2-1825142-5 Toggle Switch offers SPDT function with 6000 cycles electrical life. With EPOXY TERMINAL SEALING, it has insulation resistance of 1G ohm. Ideal for applications requiring ON-OFF-ON contact function, this switch operates at temperatures from -30°C to 85°C.
MS24658-31M
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): LOCKING LEVER; Body Length/Diameter: 32.26 mm; Sealing: ENVIRONMENTALLY SEALED;
101TL2-6
The Honeywell Sensing And Control 101TL2-6 Toggle Switch is a SPST type with dust and water-proof sealing. It has a max AC contact current of 7.5A@115VAC and DC contact voltage of 30V, suitable for panel mount-threaded applications in various industries.
B29AB
Nkk Switches
B29AB toggle switch by Nkk Switches features DPDT switch function, 50000 cycles electrical life, and 0.4VA@28VDC DC max power rating. Ideal for applications requiring ON-OFF-(ON) contact function, with gold-plated end contacts and a solder termination type.
2TL1-10A
2TL1-10A by Honeywell Sensing And Control is a DPDT toggle switch with a body width of 23.11in and sealing for dust and water proofing. It has a max AC contact current of 15A@125VAC, DC contact current of 20A@28VDC, and operates at temperatures up to 71°C. Ideal for applications requiring a latched switch function, such as panel-mounted threaded installations.
AML23EBA2AC04
Honeywell Sensing And Control's AML23EBA2AC04 is a DPDT toggle switch with 25000 cycles electrical life. It has a max DC contact voltage of 24V and can handle up to 2A@24VDC. Ideal for panel mounting applications, this switch features a paddle type actuator and latched switch action.
G12AH
The Nkk Switches G12AH Toggle Switch features a GLASS FILLED REINFORCED NYLON housing and PHOSPHOR BRONZE terminals. With an electrical life of 50000 cycles, it is ideal for applications requiring a SPDT switch function. The switch has a DC power rating of 0.4VA@28VDC and operates within a temperature range of -25 to 70 °C, making it suitable for various electronic devices.
29ET5-T
29ET5-T toggle switch by Honeywell features a corrosion-proof sealing, 4PST switch function, and a lever actuator. With a max DC contact voltage of 28V and current rating of 7A@28VDC, it is ideal for panel mount-threaded applications requiring latched switch action.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2TL1-3D
2TL1-3D by Honeywell Sensing And Control is a DPDT toggle switch with dust and water-proof sealing. It has a max AC contact current of 15A@115VAC and DC contact current of 20A@28VDC. Ideal for applications requiring a latched switch function, such as panel-mounted threaded installations in environments with temperature ranges from -65°C to 71°C.
2TL1-3
2TL1-3 by Honeywell Sensing And Control is a DPDT toggle switch with dust-proof sealing. It has a body width of 22.6in, max AC contact current of 15A, and operates b/w -65 to 71°C. Ideal for panel mounting applications requiring a latched switch function with screw termination type.
2TL1-2D
2TL1-2D toggle switch by Honeywell Sensing And Control features DPST switch function, with a body width of 22.6in and sealing for dust and water proofing. It has a max AC contact current of 15A@115VAC, DC contact current of 20A@28VDC, and operates at temperatures up to 71°C. Ideal for applications requiring a latched toggle switch with screw termination, suitable for panel mount-threaded installations.
2TL1-2
The Honeywell 2TL1-2 toggle switch features DPST switch function, 15A@115VAC AC rating, and 20A@28VDC DC rating. With a dust-proof seal and lever actuator, it is ideal for panel mount applications requiring latched switch action.
2TL1-3G
2TL1-3G by Honeywell Sensing And Control is a DPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 15A@125VAC, DC contact current of 20A@28VDC, and can operate in temperatures ranging from -65 to 71 °C. Ideal for applications requiring a latched switch function in harsh environments.
2TL1-3F
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LOCKING LEVER; Contact Function: ON-ON; Body Height: 34.29 mm;
2TL1-31
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Termination Type: SCREW; Maximum DC Contact Current: 20 A;
2TL1-7
2TL1-7 toggle switch by Honeywell Sensing And Control is a dust-proof SPDT switch with a lever actuator. It has a max AC contact current of 11A@125VAC and a max DC contact current of 18A@28VDC. This toggle switch is suitable for panel mount-threaded applications.
2TL1-1
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Maximum AC Contact Current: 15 A; Termination Type: SCREW;
2TL1-21
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): LEVER; Maximum DC Contact Current: 20 A; Switch Action: LATCHED;
2TL1-1E
2TL1-1E by Honeywell Sensing And Control is a DPDT toggle switch with locking lever actuator. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. With dust-proof and water-proof sealing, it is ideal for panel mount-threaded applications requiring a latched switch action.
2TL1-12A
2TL1-12A by Honeywell is a SPDT toggle switch with a lever actuator. It has a body width of 23.11in and sealing for dust and water proofing. With max AC contact current of 15A@277VAC, it's ideal for panel mount-threaded applications requiring latched switch action.
2TL1-7E
2TL1-7E by Honeywell Sensing And Control is a toggle switch with a body width of 23.11in and length (bushing) of 0.47in. It is dustproof and waterproof, making it suitable for various applications such as panel mounting in harsh environments.
2TL1-8
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Maximum DC Contact Current: 18 A; Body Length/Diameter: 34.04 mm;
2TL1-70
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; AC Maximum Rating R Load (Contact): 11A@125VAC; Body Length/Diameter: 34.04 mm;
2TL1-50N
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Body Length/Diameter: 34.04 mm; Body Width: 23.11 inch;
2TL1-6
TOGGLE SWITCH; Switch Function: DPST; Type (Actuator): STANDARD LEVER; Contact Function: ON-OFF; Maximum AC Contact Current: 10 A; Maximum AC Contact Voltage: 277 V;
2TL1-70E
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; DC Maximum Rating R Load (Contact): 18A@28VDC; Maximum DC Contact Voltage: 28 V;
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Maximum AC Contact Voltage: 125 V; Maximum AC Contact Current: 15 A;
2TL1-31K
2TL1-31K by Honeywell Sensing And Control is a DPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring a locking lever actuator, such as panel mount-threaded installations in environments up to 71°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved