Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
2HM1-1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a body width of 6.35in and hermetically sealed for corrosion proofing. It has a max operating temperature of 120°C, AC contact current rating of 10A@115VAC, and DC contact current rating of 5A@28VDC. Ideal for panel mounting applications requiring momentary switch action in harsh environments.
Median Price
$1,052.224
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Verical
1+ parts
100+ parts
-
1k+ parts
10k+ parts
IBS Electronics
$1,186.745
Vyrian
VNN
Nova Conductors
MISTER SPROCKETS
AZTECH Wire
$17.560
Ampacity Inc.
$865.160
Argo Parts USA
Continental Prestige Electronics
Robosynatics
Lucentia Tech
$3.195
$2.959
Aranea Global
Assy Fe
Perfect Parts
The compact size of the switch makes it easy to install in tight spaces without taking up much room.
The corrosion-proof and hermetically sealed design ensures the switch will remain effective and durable in harsh environments.
The single-pole double-throw function provides versatility in controlling different circuits with one switch.
With a high maximum operating temperature, this switch can be used in a wide range of temperature conditions.
The high maximum AC contact current allows the switch to handle heavy electrical loads safely.
The low minimum operating temperature ensures the switch can function in extremely cold conditions without issues.
The small actuator travel distance allows for precise and quick activation of the switch.
The high maximum DC contact voltage makes this switch suitable for a variety of DC electrical systems.
The snap acting/limit switch type provides reliable and accurate switching performance for various applications.
The low operating force required to activate the switch makes it easy to use and reduces strain on the user.
The high DC maximum load rating allows the switch to handle significant current levels for DC circuits.
The momentary switch action ensures the switch only stays in the activated position as long as necessary, conserving energy.
The wire termination type allows for easy connection to electrical circuits using standard wire connectors.
The high maximum AC contact voltage capacity makes the switch suitable for a wide range of AC electrical systems.
The minimal pre-travel distance ensures quick response and activation of the switch when needed.
The panel mount feature allows for easy and secure installation of the switch on various panels and surfaces.
Snap Action & Limit Switches 2HM1-1 attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Actuator Travel (mm):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
2HM1-1 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148GS08
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
American Power Devices
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Ksl Microdevices
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
General Transistor
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DB1CC1RB
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): AUXILIARY TYPE; Contact Function: ON-(ON); Additional Features: ELECTRICAL LIFE AND ELECTRICAL RATING FOR EN ALSO AVAILABLE;
914CE18-3
Honeywell Sensing And Control
914CE18-3 by Honeywell is a SPDT snap action/limit switch with 5A@250VAC AC contact rating. Featuring a steel plunger actuator, it has a 4.8mm travel and 1.8mm pre-travel, ideal for panel mounting applications requiring momentary switch action.
FF6-21-AC-QD05
FF6-21-AC-QD05 by Honeywell is a 3PST snap action/limit switch with IP67 sealing, suitable for panel mount-threaded installation. It has a max AC contact current of 2A@230VAC and operates b/w -10°C to 55°C. Ideal for applications requiring momentary switch action in industrial settings.
BZ-2RW843589-P4
BZ-2RW843589-P4 by Honeywell is a SPDT snap action/limit switch with 10A@480VAC AC and 0.5A@125VDC DC max ratings. With a body width of 17.45 inch, it has a 0.89mm actuator travel and 0.35N max operating force. Ideal for panel mounting applications requiring momentary switch action.
1CPSC1A
1CPSC1A by Honeywell Sensing And Control is a SNAP ACTING/LIMIT SWITCH with SPST function. It has IP67 sealing, 2.8A@24VAC AC Max Rating R Load, and 6A@120VDC DC Max Rating R Load. Ideal for PANEL MOUNT applications requiring MOMENTARY switch action in harsh environments with temperatures ranging from -25 to 85 °C.
SS-01GL13T
Omron
The Omron SS-01GL13T is a snap action and limit switch with a simulated roller lever actuator. It has an electrical life of 200,000 cycles and can handle a max AC contact current of 0.1A at 125VAC. This switch is commonly used in panel mount applications where momentary switch action is required.
TMCFF5SP0040Y
Itt Cannon
ITT Cannon's TMCFF5SP0040Y is a 10.2" snap action/limit switch with SPST function, ideal for panel mounting applications. With a max operating temperature of 150°C and AC contact current of 1A@125VAC, it offers reliable performance in various industrial settings. Featuring a pin plunger actuator type and quick connect termination, this switch ensures precise operation with a max DC contact voltage of 30V.
XCMD291AL1
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
D4NL-4CFG-B
GLAB33A4J
GLAB33A4J by Honeywell is a snap action/limit switch with SPDT function, IP67 sealing, and 42mm body width. It has a max AC contact current of 6A@120VAC and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
83268821
Crouzet
BZE6-2RQ219
BZE6-2RQ219 by Honeywell Sensing And Control is a snap action & limit switch with an IP40 sealing. It has a max operating temperature of 71°C and a max AC contact current of 0.5A. This switch is commonly used for panel mounting applications requiring momentary switch action.
6HM1-1
6HM1-1 by Honeywell is a hermetically sealed SPDT snap acting/limit switch with a body width of 6.35in and max operating temperature of 260°C. It has a max AC contact current of 2.5A@115VAC, making it ideal for panel mount applications requiring precise momentary switch action in harsh environments.
WOI1A00APBY
LSYAB1A
LSYAB1A by Honeywell is a SPDT snap action/limit switch with IP65-67 sealing. It has a max operating temp of 121°C, min temp of -40°C, and can handle 10A@600VAC. Ideal for panel mounting applications requiring momentary switch action in various environments.
D2D-3104
The Omron D2D-3104 is a DPST snap acting/limit switch with 4A@380VAC AC max rating, 100000 cycle electrical life, and IP40 sealing. It features a plunger actuator type with 2.3mm travel, suitable for panel mounting applications requiring momentary switch action at temperatures ranging from -25 to 85°C.
311SM701
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: SM;
311SM3
311SM3 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 6.35" width, 12.45mm height, and 19.84mm length/diameter. It has a max operating temperature of 121°C and can handle up to 5A@250VAC or 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
914CE31-6
The Honeywell Sensing And Control 914CE31-6 is a SPDT snap action/limit switch with 16" body width and 43.99mm height. It has a max AC contact current of 5A@250VAC, suitable for panel mount applications requiring momentary switch action and steel roller actuator type with 4.8mm travel distance.
BZV6-RNX1
BZV6-RNX1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 4A@480VAC AC and 0.5A@125VDC DC max ratings. Featuring a steel plunger actuator, it has an actuator travel of 6.76mm and max operating force of 5.56N. Ideal for panel mount-threaded applications requiring momentary switch action.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2HM19-1
2HM19-1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plunger actuator. It has a body width of 6.35in, hermetically sealed for corrosion proofing, and operates b/w -65°C to 125°C. With max AC contact current of 2A@115VAC and DC contact current of 4A@28VDC, it is ideal for panel mounting applications requiring momentary switch action.
2HM19-5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Body Length/Diameter: 20.04 mm; Maximum DC Contact Voltage: 28 V; Maximum Operating Temperature: 125 Cel;
2HM1-6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Body Length/Diameter: 20.04 mm; DC Maximum Rating R Load (Contact): 5A@28VDC; Manufacturer Series: 2HM1-6;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved