Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TOGGLE SWITCH; Manufacturer Series: NT;
Median Price
$63.136
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
$59.423
10k+ parts
Nova Conductors
$15.939
Vyrian
VNN
Ampacity Inc.
$14.100
Continental Prestige Electronics
$15.270
$14.965
Aranea Global
$15.620
$14.995
AZTECH Wire
$16.527
Andel Nordic
$48.710
$34.095
Argo Parts USA
Toggle Switches 1NT1-3-NH attributes and parameters. Explore more Toggle Switches devices from Honeywell Sensing And Control
Manufacturer Series:
Switch Type:
1NT1-3-NH Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
NXP Semiconductors
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Tak Cheong Electronics Holdings
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
4-6437630-2
TE Connectivity
TE Connectivity's 4-6437630-2 is a waterproof DPDT toggle switch with an insulation resistance of 1GΩ. It has a max AC contact current of 6A and is suitable for panel mounting applications.
6-639H/2
Apem Components
The Apem Components 6-639H/2 Toggle Switch has SPDT switch function, 10000 cycles electrical life, and 6A max AC contact current. With a metal lever actuator type, it is ideal for panel mount applications requiring latched switch action.
5-1437562-1
TE Connectivity 5-1437562-1 is a DPDT toggle switch with 60000 cycles electrical life. It features EPOXY sealing, gold end contact material, and SILVER plating. Ideal for applications requiring a latched ON-ON switch function with 3A max AC/DC contact current at 125V/28V and -30 to 85°C operating temperature range.
MTA406N
TE Connectivity's MTA406N Toggle Switch offers 60000 cycles electrical life, 1000000000 ohm insulation resistance, and 4PDT switch function. Ideal for applications requiring a panel mount toggle switch with gold over silver contacts and epoxy terminal sealing.
M2022SS1W01
Nkk Switches
M2022SS1W01 by Nkk Switches is a DPDT toggle switch with STAINLESS STEEL housing and COPPER ALLOY terminals. It has an electrical life of 25,000 cycles and insulation resistance of 1G ohm. Ideal for applications requiring a durable, high-quality toggle switch with a max AC contact current of 3A@250VAC.
A101SYZQ04
TE Connectivity A101SYZQ04 is a SPDT toggle switch with 1000000000 ohm insulation resistance. It has a body width of 6.858" and sealing with EPOXY TERMINAL SEALED for applications requiring ON-ON contact function at temperatures ranging from -30 to 85 °C.
M2012ES1G01
M2012ES1G01 by Nkk Switches is a SPDT toggle switch with 50000 cycles electrical life. It features a DIALLYL PHTHALATE housing, GOLD plated contacts, and COPPER/BRASS terminals. Ideal for applications requiring ON-OFF functionality in environments ranging from -30 to 85 °C.
12TL1-2D
Honeywell Sensing And Control
12TL1-2D by Honeywell Sensing And Control is a SPST toggle switch with a body width of 23.11in and sealing for dust and water proofing. It has a max AC contact current of 15A@125VAC, DC contact current of 20A@28VDC, and operates at temperatures up to 71°C. Ideal for panel mounting applications requiring a latched switch function with lever actuator type.
MS24523-21
Eaton Corporation
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER; Maximum Operating Temperature: 71 Cel; Sealing: ENVIRONMENTALLY SEALED;
DK284-73
Carling Technologies
Carling Technologies DK284-73 toggle switch features DPST switch function, 25k electrical life cycles, and 16A@125VAC AC contact current. Ideal for applications requiring quick-make/-break contact timing in environments with temperatures ranging from -18 to 66 °C.
31NT91-7
31NT91-7 by Honeywell Sensing And Control is a DPST toggle switch with dust and water-proof sealing. It has a max AC contact current of 10A@277VAC and operates at temperatures up to 71°C. Ideal for panel mounting applications requiring a momentary switch action.
MS90310-221
Safran Group
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): LEVER; Contact Function: ON-OFF-ON; AC Maximum Rating R Load (Contact): 3A@115VAC;
B29AH
B29AH toggle switch by Nkk Switches is a DPDT switch with a 50,000 cycle electrical life. It has a max power rating of 0.4VA@28VDC and insulation resistance of 500,000,000 ohm. This switch is commonly used in applications requiring ON-OFF-(ON) contact function and features gold-plated contacts for reliable performance.
2TL1-7E
2TL1-7E by Honeywell Sensing And Control is a toggle switch with a body width of 23.11in and length (bushing) of 0.47in. It is dustproof and waterproof, making it suitable for various applications such as panel mounting in harsh environments.
8372K107
Eaton Corporation's 8372K107 Toggle Switch features DPST switch function, 7A@125VAC AC rating, and screw termination. With a body width of 17.46 inch and height of 16.27 mm, it is ideal for panel mount-threaded applications requiring latched switch action.
8500K11
The Eaton Corporation 8500K11 Toggle Switch has an electrical life of 20,000 cycles and is environmentally sealed. With SPST switch function, it can handle up to 15A@115VAC for AC and 15A@28VDC for DC applications. Ideal for panel mounting in various environments with temperatures ranging from -65°C to 71°C.
7101K2ZQE2
Itt Cannon
The ITT Cannon 7101K2ZQE2 is a SPDT toggle switch with EPOXY TERMINAL SEALING. It has an electrical life of 100,000 cycles and can handle up to 5A@120VAC AC max rating R load. Ideal for panel mounting applications requiring a reliable locking lever actuator switch.
5-6437630-3
TE Connectivity 5-6437630-3 Toggle Switch offers waterproof sealing, SPDT switch function, and 6A max AC contact current. Ideal for panel mounting applications requiring high insulation resistance of 1Gohm, copper alloy end contact material, and silver plating on center contacts.
C3900BA
Bulgin
The Bulgin C3900BA toggle switch features IP67 sealing, SPST switch function, and 20A@277VAC AC max rating. With a body width of 14", it is ideal for panel mount-threaded applications requiring a durable metal lever actuator and quick connect termination. This switch offers high insulation resistance of 20M ohm and can handle up to 14A@36VDC DC max rating.
1520204-1
TOGGLE SWITCH; Manufacturer Series: 1520204;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1NT1-7
1NT1-7 by Honeywell Sensing And Control is a SPDT toggle switch with dimensions 15.75" x 29.46 mm x 28.45 mm, suitable for panel mounting applications. It offers sealing against dust and water, with max AC contact current of 10A@277VAC and DC contact current of 15A@28VDC, making it ideal for industrial control systems.
1NT1-7E
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): LOCKING LEVER; Maximum Operating Temperature: 71 Cel; Body Length/Diameter: 28.45 mm;
1NT1-2
1NT1-2 by Honeywell Sensing And Control is a dust and water-proof toggle switch with SPST function. It has a max AC contact current of 15A@277VAC and DC contact current of 20A@28VDC. Ideal for panel mounting applications requiring a durable, latched switch with silver alloy contacts.
1NT1-7-C
1NT1-7-COMB
1NT1-31
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): LEVER; Contact Function: ON-ON; AC Maximum Rating R Load (Contact): 15A@277VAC;
1NT1-7-NH
1NT1-3D
1NT1-3D by Honeywell Sensing And Control is a SPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 15A@277VAC, suitable for panel mount-threaded applications. With a locking lever actuator, this switch operates at temperatures up to 71°C.
1NT1-2G
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): LOCKING LEVER; Body Length/Diameter: 28.45 mm; Body Width: 15.75 inch;
1NT1-3
1NT1-3 by Honeywell Sensing And Control is a SPDT toggle switch with dust and water-proof sealing. It has a max AC contact current of 15A@277VAC and DC contact current of 20A@28VDC. Ideal for panel mount applications, this lever actuated switch operates at temperatures up to 71°C.
1NT1-3-C
1NT1-3F
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): LOCKING LEVER; Maximum Operating Temperature: 71 Cel; Switch Action: LATCHED;
1NT1-2D
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): LOCKING LEVER; Maximum AC Contact Voltage: 277 V; Body Width: 15.75 inch;
1NT1-5
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): LEVER; Body Length/Diameter: 28.45 mm; DC Maximum Rating R Load (Contact): 15A@28VDC;
1NT1-8
1NT1-8 by Honeywell Sensing And Control is a SPDT toggle switch with a body width of 15.75in and sealing for dust and water proofing. It has a max AC contact current of 10A@277VAC, DC contact voltage of 28V, and is ideal for panel mount-threaded applications.
1NT1-6
1NT1-6 by Honeywell Sensing And Control is a SPST toggle switch with dust and water-proof sealing. It has a max AC contact current of 10A@277VAC and DC contact current of 15A@28VDC. Ideal for applications requiring ON-OFF-ON functionality, it features a lever actuator type and panel mount-threaded mounting feature.
1NT1-31-NH
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Length (Actuator): .67 inch;
1NT1-3-JLG
1NT1-3-NH-ALT
TOGGLE SWITCH; Manufacturer Series: NT; AC Maximum Rating R Load (Contact): A@VAC; DC Maximum Rating R Load (Contact): A@VDC;
1NT1-3-TM
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved