Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): LEVER; Manufacturer Series: MS24523; Body Height: 29.46 mm;
Median Price
$28.925
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$27.070
100+ parts
$25.470
1k+ parts
$23.660
10k+ parts
-
TTI
$30.780
AE Petsche
$108.500
Flame Enterprises (Authorized)
Marine Air Supply
Verical
$14.514
Freelance Electronics
$18.999
$19.949
$18.809
Vyrian
Bristol Electronics
Nova Conductors
R&J Components
Electronic Expediters
Mil-Aero Solutions, Inc.
Resion
Legend Electronics Inc.
Electro Mavin
Sunrise Surplus Inc.
Electronics Depot
Ampacity Inc.
$23.010
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Toggle Switches MS24523-28 attributes and parameters. Explore more Toggle Switches devices from Honeywell Sensing And Control
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Manufacturer Series:
Mounting Feature:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
MS24523-28 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
1554216004
Molex
WIRE AND CABLE;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Lite-on Semiconductor
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
General Semiconductor
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LT-2521-710-012
Carling Technologies
TOGGLE SWITCH;
MS24523-21
Eaton Corporation
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER; Maximum Operating Temperature: 71 Cel; Sealing: ENVIRONMENTALLY SEALED;
5636AB16
Apem Components
5636AB16 by Apem Components is a stainless steel toggle switch with an electrical life of 50,000 cycles and insulation resistance of 1,000,000,000 ohms. It has a max DC contact voltage of 30V and is ideal for applications requiring a durable and reliable toggle switch with ON-ON contact function.
7591K4
The Eaton Corporation 7591K4 is a DPDT toggle switch with a body width of 19.05in and height of 31.75mm, suitable for panel mount-threaded installation. It has a max AC contact current of 6A@125VAC, making it ideal for applications requiring latched switch action and screw termination type.
MS24523-28
The Eaton Corporation MS24523-28 is a SPST toggle switch with an electrical life of 20,000 cycles. It is environmentally sealed and has a max operating temperature of 71°C. Ideal for panel mounting applications, it can handle up to 15A at 115VAC or 28VDC, making it suitable for various industrial uses.
62NT1-6
Honeywell Sensing And Control
62NT1-6 by Honeywell is a DPST toggle switch with IP67/IP68 sealing, suitable for panel mounting. It has a max AC contact current of 11A@115VAC and DC contact current of 18A@28VDC. With a standard lever actuator, it operates at temperatures up to 71°C, making it ideal for various industrial applications.
MS24523-22
Safran Group
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-OFF; Termination Type: SCREW;
12146AGK
12146AGK by Apem Components is a DPDT toggle switch with brass housing, rated for 50000 cycles. Featuring dust-proof and waterproof sealing, it has an insulation resistance of 1000000000 ohm. Ideal for applications requiring a latched ON-ON switch function, with a max DC contact voltage of 30V and current rating of 4A.
7-6437630-0
TE Connectivity's 7-6437630-0 Toggle Switch offers waterproof sealing, SPDT switch function, and 20A max AC contact current. Ideal for applications requiring a durable toggle switch with high insulation resistance of 1Gohm, such as marine electronics or outdoor industrial equipment.
8501K4
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Body Width: 23.11 inch;
1TL1-21
1TL1-21 by Honeywell is a SPST toggle switch with a body width of 15.75in and sealing for dust-proof protection. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring a latched toggle switch with screw termination, such as panel-mounted threaded installations.
3544-101NA00
3544-101NA00 by Apem Components is a DP3T toggle switch with IP67/IP64 sealing, suitable for panel mount applications. It has a max AC contact current of 15A@125VAC and DC contact current of 15A@28VDC. With a locking lever actuator, it offers an electrical life of 6000 cycles.
W31-X2M1G-30
TE Connectivity's W31-X2M1G-30 is a SPST toggle switch with 30A@250VAC AC and 30A@50VDC DC max ratings. With a silver actuator, it has a body width of 17.53in and height of 40.64mm, making it suitable for panel mount applications requiring latched switch action.
11TW1-3
11TW1-3 by Honeywell Sensing And Control is a SPDT toggle switch with a body width of 13.59in and sealing for dust proofing. It has a max AC contact current of 5A, making it suitable for applications requiring reliable switching in harsh environments. The switch features gold plating on end contacts and silver alloy material, with an operating temperature range from -65°C to 71°C.
1TL343-5K
1TL343-5K by Honeywell Sensing And Control is a SPDT toggle switch with locking lever actuator. It has a body width of 15.75in and sealing for dust and water proofing. With max AC contact current of 15A@125VAC, it is ideal for panel mount-threaded applications requiring latched and momentary switch action.
8501K1
The Eaton Corporation 8501K1 is a DPDT toggle switch with an electrical life of 20,000 cycles. It is environmentally sealed and has a max AC contact current of 15A@115VAC. Ideal for applications requiring a latched switch function in environments with temperatures ranging from -65°C to 71°C.
1TL1-1P
1TL1-1P toggle switch by Honeywell features a locking lever actuator and SPDT switch function. With a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC, it is ideal for applications requiring latched switch action. Its dust-proof sealing makes it suitable for panel mount-threaded installations in various industrial settings.
11TW1-8F
11TW1-8F by Honeywell Sensing And Control is a SPDT toggle switch with 5A@125VAC max AC contact current. Featuring dust-proof sealing, it has a body width of 13.59in and is ideal for panel mount-threaded applications requiring momentary switch action.
7105SYCQE
C & K Components
TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SP3T; Type (Actuator): TOGGLE; Solderability: MIL-STD; Additional Features: PANEL MOUNTABLE;
1MT1-2
1MT1-2 toggle switch by Honeywell has an electrical life of 60000 cycles, IP67/IP68 sealing, and a max DC contact voltage of 28V. It is ideal for applications requiring a SPDT switch function, with a standard lever actuator type and latched switch action. The switch operates in temperatures ranging from -40°C to 85°C and features gold terminal finish with silver alloy contacts.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MS24523-23
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER; Maximum AC Contact Voltage: 115 V; Maximum AC Contact Current: 15 A;
Defense Logistics Agency
MS24523-23 by Defense Logistics Agency is a SPDT toggle switch with 15A@115VAC AC rating and 20A@28VDC DC rating. It features environmentally sealed body, standard lever actuator, latched switch action, and screw termination. Ideal for panel mount-threaded applications requiring reliable switching in harsh environments.
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Diameter (Bushing): .432 inch;
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): STANDARD LEVER; Contact Function: ON-ON; Maximum AC Contact Voltage: 115 V;
MS24524-23
MS24524-23 by Defense Logistics Agency is a DPDT toggle switch with environmentally sealed body. It has 15A@115VAC AC and 20A@28VDC DC max ratings, suitable for panel mount-threaded applications. The switch features standard lever actuator, latched action, and screw termination type.
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Sealing: ENVIRONMENTALLY SEALED; Maximum AC Contact Voltage: 115 V;
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): STANDARD LEVER; Contact Function: ON-ON; Solderability: MIL-STD;
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Length (Bushing): .47 inch;
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER; Maximum DC Contact Voltage: 28 V; Maximum Operating Temperature: 71 Cel;
MS24523-22 by Defense Logistics Agency is a SPST toggle switch with 15A@115VAC AC rating and 20A@28VDC DC rating. It features environmentally sealed body, standard lever actuator, and latched switch action. Ideal for panel mount-threaded applications requiring reliable switching in harsh environments.
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): STANDARD LEVER; Maximum AC Contact Voltage: 115 V; Body Width: 15.75 inch;
MS24659-23D
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Contact Function: ON-ON; Termination Type: SCREW;
The Eaton Corporation MS24659-23D is a DPDT toggle switch with 20000 cycles electrical life. It has a body width of 23.11 inch and is environmentally sealed for durability. Ideal for panel mounting applications, it can handle up to 15A@115VAC AC max rating R load and 20A@28VDC DC max rating R load.
Otto Engineering
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Contact Function: ON-ON; Body Height: 34.8 mm;
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LOCKING LEVER; Contact Function: ON-ON; Switch Action: LATCHED;
MS24658-23D
Eaton Corporation's MS24658-23D is a SPDT toggle switch with 20000 cycles electrical life. It has a body width of 16.13in and sealing for environmental protection. Ideal for applications requiring a latched switch function, with max AC contact current of 15A@115VAC and DC contact current of 20A@28VDC.
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): LEVER; Switch Action: LATCHED; Maximum DC Contact Current: 20 A;
MS-24658-23D
MS-24658-23D by Honeywell is a 15.75" toggle switch with SPDT function, suitable for dust-proof environments. It has a max AC contact current of 15A@115VAC and DC contact current of 20A@28VDC. Ideal for panel mounting applications requiring a locking lever actuator and latched switch action.
MS24524-21
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Maximum AC Contact Voltage: 115 V; Termination Type: SCREW;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved