Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
14CE3-3 by Honeywell Sensing And Control is a SPDT snap action/limit switch with IP65 sealing. It has a max operating temperature of 70°C and can handle up to 5A@240VAC. Ideal for panel mounting applications requiring momentary switch action in various industries.
Median Price
$340.225
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Verical
1+ parts
$252.129
100+ parts
-
1k+ parts
10k+ parts
Powell Electronics
$317.450
Chip1Stop
$363.000
DigiKey
$475.140
$447.198
$438.254
Sensorwell Vertriebs GesmbH
Kempston Controls
$190.180
IBS Electronics
$333.921
Vyrian
Nova Conductors
VNN
Aranea Global
Ensures protection against dust and water, making the switch suitable for outdoor or harsh environments.
Offers versatility in controlling circuits with multiple outputs, allowing for more complex electrical configurations.
Can withstand high temperatures, ensuring reliable performance in challenging operating conditions.
Suitable for controlling moderate to high power loads, making it versatile for various applications.
Can operate in low temperature environments without any performance issues, increasing its usability.
Provides precise and accurate actuation, ensuring the switch responds efficiently to changes in the environment.
The unique design of the actuator allows for reliable and consistent switching, enhancing product performance.
Combines the reliability of a traditional limit switch with the quick response of a snap action switch, offering the best of both worlds.
Capable of handling higher voltage and current, making it suitable for a wide range of industrial and commercial applications.
Provides a suitable level of actuation force for reliable operation, ensuring consistent performance over time.
Ideal for applications where temporary contact closure is required, providing flexibility in controlling electrical circuits.
Offers easy connection to electrical circuits, simplifying installation and maintenance processes.
Capable of handling high voltage levels safely, making it suitable for a wide range of electrical applications.
Allows for precise actuation with minimal travel distance, ensuring reliable and accurate switch operation.
Facilitates easy installation on panels or enclosures, providing a secure mounting option for the switch.
Snap Action & Limit Switches 14CE3-3 attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Actuator Travel (mm):
Type (Actuator):
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum AC Contact Voltage:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
14CE3-3 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
Microchip Technology
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Semiconductor
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
DC2CA1LB
The Cherry
The Cherry's DC2CA1LB snap action/limit switch has a 6000 cycle electrical life, SPDT switch function, and IP67 sealing. With a max AC contact current of 10.1A@250VAC, it is ideal for applications requiring reliable switching in harsh environments. The compact design with a body width of 6.5 inch and height of 9mm makes it suitable for panel mounting in various industrial settings.
D2FS-FL-N-T
Omron
SNAP ACTING/LIMIT SWITCH;
914CE2-3
Honeywell Sensing And Control
The Honeywell Sensing And Control 914CE2-3 is a SPDT snap action/limit switch with 16" body width and 43.99mm height. Featuring a steel roller actuator, it has a max AC contact current of 5A@250VAC. Ideal for panel mounting applications requiring momentary switch action with 4.8mm actuator travel and 12.01N max operating force.
HBS2KCF5ST055C
C & K Components
HBS2KCF5ST055C by C & K Components is a snap action/limit switch with SPDT function. It features a PHENOLIC housing and BRASS terminals, offering an electrical life of 150k cycles. With IP65 sealing, it is suitable for applications requiring a max operating temperature of 150°C and insulation resistance of 1G ohm.
D2F-01L30-D3
Omron's D2F-01L30-D3 is a SPDT snap action/limit switch with 30000 cycles electrical life. Featuring IP40 sealing, it has a max operating force of 1.47N and operates at temperatures ranging from -25°C to 65°C. Ideal for panel mounting applications requiring momentary switch action with simulated roller lever actuator.
V7-1C28E9
Honeywell Sensing And Control's V7-1C28E9 is a 10.16" snap action switch with SPST function, ideal for panel mounting applications. It offers a max AC contact current of 15.1A@277VAC and DC contact current of 0.5A@125VDC, with an actuator travel of 2.46mm and quick connect termination type.
AV440461
AV440461 by Panasonic is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring a PIN PLUNGER actuator, it has 0.4mm actuator travel and 0.98N max operating force. Ideal for applications requiring momentary switch action, with SOLDER termination type and -25 to 80°C operating temperature range.
V7-5F17D8-336
Honeywell V7-5F17D8-336 is a SPDT snap action/limit switch with 3A@277VAC rating. Featuring 22.35mm body width, 15.88mm height, and 19.52mm actuator travel, it's ideal for panel mount applications requiring momentary switch action in industrial settings.
E79-00A
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Contact Function: ON-(ON); Body Width: 13.72 inch;
AV4044
The Panasonic AV4044 is a SPDT snap action/limit switch with 20000 cycles electrical life. Featuring a simulated roller lever actuator, it has a max operating force of 0.29N and can handle 0.5A@30VDC DC max rating R load. Ideal for applications requiring momentary switch action in environments with temperatures ranging from -25°C to 80°C.
ADPDC2J04AC
Itt Cannon
ITT Cannon's ADPDC2J04AC is a DPDT snap action/limit switch with 200000 cycles electrical life. With a max AC contact current of 15A@250VAC, it has a body width of 16.3 inch and body height of 28.4 mm. Ideal for panel mounting applications requiring momentary switch action and quick connect termination type.
9007AO1S1
Schneider Electric Sa
ZCMD25
D2D-3104
The Omron D2D-3104 is a DPST snap acting/limit switch with 4A@380VAC AC max rating, 100000 cycle electrical life, and IP40 sealing. It features a plunger actuator type with 2.3mm travel, suitable for panel mounting applications requiring momentary switch action at temperatures ranging from -25 to 85°C.
D413-R1LD-G2
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Length (Actuator): .122 inch; Minimum Operating Temperature: -40 Cel; Body Width: 10.3124 inch; Body Height: 15.9004 mm;
GLHC01A1B
The Honeywell Sensing And Control GLHC01A1B is a 42mm snap action/limit switch with SPDT function, IP67 sealing, and side rotary roller lever actuator. It has a max AC contact current of 6A@120VAC and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
D3M-01L1-3
Omron's D3M-01L1-3 is a Snap Action & Limit Switch with 200000 cycles electrical life. Featuring SPST switch function, it has a body width of 7" and sealing rating of IP00. Ideal for panel mounting applications, it offers momentary switch action with a max operating force of 1N and actuator travel of 0.7mm.
ESE18R11C
ESE18R11C by Panasonic is a SPST snap action/limit switch with 50000 cycles electrical life. Featuring a lever actuator, it has a max operating force of 0.3N and operates at temperatures ranging from -10°C to 60°C. Ideal for applications requiring momentary switch action, such as surface mount-right angle installations.
BZ-RX243
BZ-RX243 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 17.45mm body width and 21.34mm height. It has a max operating temperature of 121°C, AC contact current of 15A@480VAC, and DC contact current of 0.5A@125VDC. Ideal for panel mounting applications requiring momentary switch action with hardened steel plunger actuator.
D3M-01L1
Omron's D3M-01L1 snap action & limit switch has a 200000 cycle electrical life, SPST switch function, and 7" body width. With IP00 sealing, it operates b/w -25 to 85°C. Ideal for panel mounting applications requiring momentary switch action with a max force of 1N.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
14CE1-7
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP PLUNGER; Body Length/Diameter: 40 mm; Termination Type: WIRE;
14CE66-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): BALL BEARING PLUNGER; Maximum AC Contact Voltage: 240 V; Maximum Operating Force: 11.8 N;
14CE66-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): BALL BEARING PLUNGER; AC Maximum Rating R Load (Contact): 5A@240VAC; Termination Type: WIRE;
14CE102-3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; Body Height: 49 mm; Maximum Operating Temperature: 70 Cel;
14CE1-Q
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP PLUNGER; AC Maximum Rating R Load (Contact): 3A@125VAC; Maximum Pre Travel: 1 mm;
14CE101-3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP PIN PLUNGER; Maximum Operating Force: 11.8 N; Maximum Pre Travel: 1.8 mm;
14CE103-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; Termination Type: WIRE; Maximum Operating Temperature: 70 Cel;
14CE2-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; AC Maximum Rating R Load (Contact): 5A@240VAC; Maximum AC Contact Voltage: 240 V;
14CE1-5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP PLUNGER; Termination Type: WIRE; Switch Action: MOMENTARY;
14CE102-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; Maximum Operating Temperature: 70 Cel; AC Maximum Rating R Load (Contact): 5A@240VAC;
14CE2-3K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; Actuator Travel (mm): 4; Sealing: IP66;
14CE101-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP PIN PLUNGER; Body Length/Diameter: 40 mm; Sealing: EXPLOSION PROOF; IP65;
14CE101-6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP PIN PLUNGER; Body Height: 49 mm; Manufacturer Series: 14CE100;
14CE18-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP PLUNGER; AC Maximum Rating R Load (Contact): 5A@240VAC; Maximum AC Contact Current: 5 A;
14CE2-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; Sealing: IP65; Maximum Pre Travel: 1.8 mm;
14CE3-10A
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): CROSS ROLLER PLUNGER (90 DEGREE ROTATED; Actuator Travel (mm): 4; DC Maximum Rating R Load (Contact): A@VDC;
14CE3-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): CROSS ROLLER PLUNGER (90 DEGREE ROTATED; Maximum AC Contact Current: 5 A; Maximum Pre Travel: 1 mm;
14CE3-4AG
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): CROSS ROLLER PLUNGER (90 DEGREE ROTATED; Switch Action: MOMENTARY; Maximum AC Contact Current: 1 A;
14CE3-6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): CROSS ROLLER PLUNGER (90 DEGREE ROTATED; Switch Action: MOMENTARY; Minimum Operating Temperature: 0 Cel;
14CE31-2AL
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; Termination Type: WIRE; Maximum AC Contact Voltage: 240 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved