Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
122SM44-T2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 1A@125VAC AC max rating. Featuring a roller type actuator, it has a body width of 6.35 inch and is suitable for panel mounting applications requiring momentary switch action.
Median Price
$72.150
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$27.830
100+ parts
-
1k+ parts
$21.110
10k+ parts
$15.590
Master Electronics
$40.930
$40.720
Verical
$90.527
IBS Electronics
$89.255
$49.915
$48.583
VNN
Vyrian
Q Components
Nova Conductors
4 Star Electronics, Inc.
AZTECH Wire
$9.830
Ampacity Inc.
$23.030
Assy Fe
Aranea Global
The compact body width makes it suitable for installations in tight spaces or crowded panels.
The SPDT switch function provides versatility in controlling different circuits with one switch.
The low body height allows for easy integration into various equipment or machinery without taking up much space.
The high maximum AC contact current rating ensures reliable performance in handling electrical loads.
The actuator travel distance of 6.32 mm allows for precise and responsive switching action.
The roller type actuator offers smooth and consistent operation for consistent performance.
The maximum DC contact voltage of 30V allows for safe operation within the specified voltage range.
The snap acting/limit switch type provides quick and accurate switching in response to trigger conditions.
The high AC maximum rating for resistive load contact ensures compatibility with a wide range of applications.
The compact body length/diameter makes it suitable for applications requiring a small footprint.
The moderate maximum operating force allows for easy actuation while providing tactile feedback.
The high DC maximum rating for resistive load contact ensures reliability and safety in DC circuits.
The high maximum DC contact current rating allows for handling electrical loads effectively.
The momentary switch action provides temporary contact closure for specific control applications.
The screw termination type allows for secure and reliable connections during installation.
The high maximum AC contact voltage rating ensures compatibility with a wide range of AC power systems.
The maximum pre-travel distance of 5.56 mm allows for precise positioning and control before actuation.
The panel mount feature enables easy installation on control panels or equipment surfaces for convenient access.
Snap Action & Limit Switches 122SM44-T2 attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Mounting Feature:
Maximum Operating Force:
Maximum Pre Travel:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
122SM44-T2 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138NH6327XTSA2
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
V7-7B19D8-263
Honeywell Sensing And Control
V7-7B19D8-263 by Honeywell is a snap action/limit switch with SPDT function, 100000 cycles electrical life, and 10.16" body width. It is made of polyester and features steel lever actuator with 4.53mm travel. Ideal for applications requiring momentary switch action in temperatures ranging from -40 to 82°C.
TMCFF5SP0040Y
C & K Components
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PIN PLUNGER; Length (Actuator): .11 inch; DC Maximum Rating R Load (Contact): 1A@30VDC;
FF6-21-AC-QD05
FF6-21-AC-QD05 by Honeywell is a 3PST snap action/limit switch with IP67 sealing, suitable for panel mount-threaded installation. It has a max AC contact current of 2A@230VAC and operates b/w -10°C to 55°C. Ideal for applications requiring momentary switch action in industrial settings.
23AC81
23AC81 by Honeywell is a SNAP ACTING/LIMIT SWITCH with STAINLESS STEEL housing. It has SPDT switch function, 5A@250VAC AC Max Rating R Load, and -18 to 82 °C operating temperature range. Ideal for PANEL MOUNT applications requiring precise actuation and durable construction.
WLCA12-N
Omron
SNAP ACTING/LIMIT SWITCH;
DC1CA1AA
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): BUTTON TYPE; Terminal Finish: Silver (Ag); Maximum Pre Travel: 1 mm;
BZE6-2RN7
BZE6-2RN7 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It has a body width of 25.4mm, IP54 sealing, and operates at max AC contact current of 15A. Ideal for panel mounting applications requiring momentary switch action with a spherical steel plunger actuator.
LSA2B-1B
LSA2B-1B by Honeywell is a DPDT snap action/limit switch with IP65/IP66/IP67 sealing. It has a max operating temperature of 121°C and can handle up to 10A@600VAC. Ideal for panel mounting applications, this switch features side rotary actuation and screw termination.
DB1C-C1AA
DB1C-C1AA by Zf Friedrichshafen Ag is a SPDT snap acting/limit switch with 6000 cycles electrical life. Featuring brass terminals, it has a body width of 6.45 inch and sealing rating of IP50. Ideal for applications requiring momentary switch action and max operating temperature of 120°C, with AC contact current up to 5A@250VAC.
LSA1A4
LSA1A4 by Honeywell Sensing And Control is a SPDT snap acting/limit switch with side rotary actuator. It has a max operating temperature of 121°C and min of -12°C, suitable for panel mount applications. With a max DC contact voltage of 250V and AC contact voltage of 600V, it offers reliable momentary switch action with wire termination.
ZCD29
Schneider Electric Sa
BZ-2RW82224-A2
Honeywell Sensing And Control's BZ-2RW82224-A2 is a SPDT snap action/limit switch with 15A@480VAC AC rating. Featuring wide sintered stainless steel roller actuator, it has 1.67N max operating force and 2.39mm actuator travel. Ideal for panel mount applications requiring momentary switch action.
LSA1A-1B
LSA1A-1B by Honeywell is a SPDT snap action/limit switch with -12 to 121°C operating range. Featuring side rotary actuator, it has 250V DC and 600V AC contact voltage. Ideal for panel mounting applications, this switch offers momentary switch action with wire termination.
311SM605-H4
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: SM;
11SM2440
11SM2440 by Honeywell is a SPDT snap action/limit switch with a plastic plunger. It has a body width of 6.35in, height of 9.04mm, and actuator travel of 0.63mm. With max DC contact voltage of 30V and current rating of 5A@30VDC, it is ideal for panel mounting applications requiring momentary switch action.
XCF3-S1Z1
Johnson Electric Group
Snap Acting/Limit Switches;
ESE58L11B
Panasonic
The Panasonic ESE58L11B is a SPST snap action/limit switch with 50000 cycles electrical life. With a body width of 3", it has an actuator travel of 1.4mm and operates b/w -10°C to 60°C. Ideal for applications requiring momentary switch action, it features solder termination and surface mount-right angle mounting.
LCGHF5A10LC
LCGHF5A10LC by C & K Components is a SPDT snap action/limit switch with 6000 cycles electrical life. Featuring copper alloy terminals, it has a max operating force of 0.56N and operates at temperatures ranging from -25 to 85°C. Ideal for applications requiring high force actuation such as industrial machinery and automation systems.
D2F-01FL-D3
Omron's D2F-01FL-D3 is a SPDT snap action/limit switch with 30000 cycles electrical life. Featuring HINGE LEVER actuator type, it has 0.55mm actuator travel and 0.74N max operating force. Ideal for panel mounting applications, it operates b/w -25°C to 65°C with IP40 sealing for protection.
F79-30A
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; AC Maximum Power Rating R Load (Contact): 0.33HP@250VAC; AC Maximum Rating R Load (Contact): 10A@250VAC;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved