Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HDR-E26MAG1+ by Honda Tsushin Kogyo is a 26-contact telecom/datacom connector with gold termination, suitable for commercial applications. Featuring a mating contact pitch of 0.031", insulation resistance of 1Gohm, and operating temperatures from -40 to 70°C, it offers reliable connectivity in various environments. With a compact body size of 0.614" x 0.213" x 0.323", this male connector is ideal for cable mounting with IDC termination.
Median Price
$5.797
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
IBS Electronics
$3.962
$3.225
Corohmni
$3.471
Netroflash
The fine pitch allows for high density connections, making this product suitable for applications requiring many connections in a small space.
High insulation resistance ensures reliable signal transmission and helps prevent electrical leakage, making it a dependable choice for data and telecom applications.
The high dielectric voltage withstand capability ensures safety and reliability in high voltage applications, making this connector suitable for a variety of telecom and datacom installations.
Gold contact finish provides excellent conductivity and corrosion resistance, ensuring stable signal transmission and making this connector a reliable choice for long-term use.
Low contact resistance helps to minimize signal loss and maintain signal integrity, making this connector suitable for high-performance telecom and datacom systems.
Telecom & Datacom Connectors HDR-E26MAG1+ attributes and parameters. Explore more Telecom & Datacom Connectors devices from Honda Tsushin Kogyo
Additional Features:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
Minimum Withdrawal Force (N):
HDR-E26MAG1+ Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Honda Tsushin Kogyo is a Connector Global Developer and Manufacturer specializing in the Connector components connecting through Wire & Fiber optics. We provide a lot of joy and impression by "connecting" for a prosperous future.
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Toshiba
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
NXP Semiconductors
Siemens
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
RJHSE-5080
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: PHOSPHOR BRONZE; Filter Feature: NO;
RJE60-188-5401
Amphenol
Amphenol RJE60-188-5401 is a Telecom & Datacom Connector with 8 contacts, rated at 1.25A signal current. It features a dielectric voltage of 1400VAC and insulation resistance of 500MΩ. Ideal for telecom applications requiring right-angle mounting and solder termination.
2007492-8
TE Connectivity
TE Connectivity's 2007492-8 is a Telecom & Datacom Connector with 40 contacts, operating from -55 to 105°C. It features press-fit termination, UL94V-0 flammability rating, and is suitable for board mounting applications.
1932391-2
TE Connectivity's 1932391-2 is a telecom & datacom connector with EMI shielding, PBT-POLYESTER insulator, and nickel-plated brass shell. It has 8 contacts, rated at 1.5A signal current, UL94V-0 flammability code, and operates b/w -40 to 85°C. Ideal for board and panel mounting in telecom/datacom applications.
UX60SC-MB-5ST
Hirose Electric
The Hirose Electric UX60SC-MB-5ST is a USB connector with 5 contacts, featuring a tin finish and surface mount termination. Ideal for telecom & datacom applications, it offers a right-angle mounting style and copper alloy shell material. The connector is UL 94V-0 flammability rated, with a filter feature for improved performance.
5555167-1
TE Connectivity 5555167-1 is a Telecom & Datacom Connector with 0.608" body length, 0.5" width, and PBT-POLYESTER insulator. It has 8 contacts, rated at 1.5A signal current, suitable for board mounting applications in telecom and datacom equipment.
67068-8001
Molex
Molex 67068-8001 USB connector features gold termination, glass-filled polyamide insulator, and phosphor bronze contact material. Ideal for telecom/datacom applications with 1000000000 ohm insulation resistance, 750VAC dielectric voltage, and 1500 cycle durability. Operating temperature range from 0 to 50 °C.
1051330021
USB CONNECTOR; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: GOLD; Mating Contact Finish: NOT SPECIFIED;
6-569550-2
Commscope
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD;
RJHSE-3380
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Mounting Type: BOARD AND PANEL; Board Mounting Option: SPLIT BOARD LOCK;
2049261103
USB CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
57-30500
Amphenol 57-30500 is a Telecom & Datacom Connector with 50 contacts, 0.085" pitch, and 2 rows. It has a dielectric voltage of 700VDC, gold termination finish, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable signal transmission in telecom and datacom systems.
SS-6488S-A-NF-K1
Bel Fuse
Bel Fuse's SS-6488S-A-NF-K1 is a telecom and datacom connector with a body size of 0.635" x 0.55" x 0.85". It has 8 contacts, a polarization key, and a shell made of copper alloy. This right-angle jack connector is commonly used in commercial applications.
67068-8010
67068-8010 by Molex is a USB connector with 4 contacts, rated at 1.5A signal current. It features a 0.433" body width, 0.669" depth, and GLASS FILLED POLYAMIDE insulator material. Ideal for telecom/datacom applications due to its durability of 1500 cycles and right-angle mounting style.
2294415-2
TE Connectivity 2294415-2 is a Telecom & Datacom Connector with EMI shielding, LCP insulator, and 8 contacts. Ideal for telecom applications, it has a body size of 0.386" x 0.29" x 0.551", operates b/w -40°C to 85°C, and features right-angle mounting with surface mount termination.
67503-1230
The Molex 67503-1230 USB connector features a body length of 0.303", insulation resistance of 100M ohm, and dielectric voltage rating of 100VAC. Ideal for telecom/datacom applications, it offers a durable design with GLASS FILLED NYLON insulator material and TIN termination finish. With a total of 5 contacts, this right-angle receptacle has a surface mount termination type and is rated for commercial reliability.
SS-7188S-A-NF-50
Bel Fuse SS-7188S-A-NF-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for PCB mounting at 2.54mm pitch. Ideal for commercial applications requiring right angle mounting with solder termination.
5787394-7
TE Connectivity 5787394-7 is a telecom & datacom connector with 68 contacts, 0.05" mating pitch, and EMI shielding. Ideal for board mounting applications in commercial settings with operating temperatures from -55°C to 105°C.
1734035-2
TE Connectivity USB Connector 1734035-2 features Matte Tin finish, Glass Filled Polyamide9T insulator, and Stainless Steel shell. Ideal for telecom/datacom applications with 1A signal current rating, UL Flammability Code 94V-0, and right angle mounting style. Operating temperature range -40 to 85°C ensures reliability in commercial settings.
HFJ11-1G01ERL
Halo Electronics
HFJ11-1G01ERL by Halo Electronics is a Telecom & Datacom Connector with gold termination finish. It features a polarized housing, 8 contacts, and right-angle mounting style. Ideal for telecom and datacom applications requiring a compact 0.625" x 0.537" x 0.85" design with filtering capabilities at temperatures ranging from 0 to 70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HDR-E26MSG1+
Honda Tsushin Kogyo
HDR-E26MSG1+ by Honda Tsushin Kogyo is a telecom & datacom connector with 26 gold contacts, nickel shell finish, and GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has a UL Flammability Code of 94V-0 and is designed for cable mounting applications. The connector features male contact gender and solder termination for reliable connectivity in various communication systems.
HDR-EA26LMYPG1+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Filter Feature: NO; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier;
HDR-E50MSG1+
HDR-E50MSG1+ by Honda Tsushin Kogyo is a 50-contact male connector with gold finish, suitable for telecom and datacom applications. Featuring a mating contact pitch of 0.031", insulation resistance of 1G ohm, and rated current of 0.5A, this connector offers reliable performance in commercial settings. Its compact dimensions make it ideal for cable mounting with solder termination, ensuring secure connections in telecommunications systems.
HDR-E14MSG1+
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Mating Contact Finish: GOLD (30) OVER NICKEL; Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e4;
HDR-EA26LMYPG1-SLE+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Material: STEEL; DIN Conformance: NO; Empty Shell: NO;
HDR-EA26LMYPG1-SLF+
HDR-EA26LMYPG1-SLF+ by Honda Tsushin Kogyo is a telecom & datacom connector with 26 contacts, gold mating contact finish over nickel, and glass-filled polyphenylene sulfide insulator material. It is a surface mount type connector suitable for board mounting applications requiring high UL flammability rating (94V-0).
HDR-EA26LMYPG1-SLG+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Filter Feature: NO; Insulator Material: GLASS FILLED POLYPHENYLENE SULFIDE;
HDR-EA26LMYPG1-SLK+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Filter Feature: NO; Empty Shell: NO;
HDR-EA26LMYPG1-TP+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; MIL Conformity: NO; Shell Finish: NICKEL;
HDR-EC50LFDTG2-SLG+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Insulator Color: BLACK;
HDR-E26FSG1+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Termination Type: SOLDER; Insulator Material: GLASS FILLED POLYAMIDE9T;
HDR-EA14LFYPG1-SLE
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mounting Type: BOARD; Mounting Style: RIGHT ANGLE;
HDR-EA14LFYPG1-SLE+
HDR-EA14LFYPG1-SLE+ by Honda Tsushin Kogyo is a telecom/datacom connector with 0.031" mating contact pitch, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. It is ideal for board mounting applications in telecom and datacom systems, offering high reliability with a commercial rating and operating temperatures ranging from -55 to 105°C.
HDR-EA26LFYPG1-SLG+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Insulator Material: GLASS FILLED POLYPHENYLENE SULFIDE;
HDR-EC26LFDTG2-SLG+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Insulator Material: GLASS FILLED POLYAMIDE9T;
HDR-E26MAG1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Filter Feature: NO; Insulator Material: POLYBUTYLENE TEREPHTHALATE;
HDR-E26MBAG1+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; Reference Standard: UL;
HDR-E26MBG1+
HDR-E26MG1+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; Maximum Wire Size: 28 AWG;
HDR-E26FAG1+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Plating Thickness (inch): 30u;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved