Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MODULATOR; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Frequency: 1800 MHz; Maximum Input Power (CW): 27 dBm; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 2700 MHz;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$2.171
$2.019
IDEA Electronic Components Group
$2.334
$2.217
DigiPath Technology Company
$3.641
$3.495
AZTECH Wire
$7.086
Ampacity Inc.
$33.000
One Stop Electronics
$34.000
Semicontronic
$39.000
$38.025
$37.830
Corphita
RF/Microwave Modulator/Demodulators HMC631LP3 attributes and parameters. Explore more RF/Microwave Modulator/Demodulators devices from Hittite Microwave
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Modulation Technique:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
HMC631LP3 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
1N4148WT
Kec
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
ADL5372ACPZ-R2
ADL5372ACPZ-R2 by Analog Devices is a RF modulator with Quadrature Phase modulation, operating b/w -40°C to 85°C. It has a frequency range of 1500-2500 MHz and characteristic impedance of 50 ohm. Ideal for RF/Microwave applications requiring precise modulation/demodulation capabilities.
MAX2450CEP+T
Maxim Integrated
MODULATOR/DEMODULATOR; Minimum Operating Temperature: 0 Cel; Minimum Operating Frequency: 70 MHz; Terminal Finish: MATTE TIN; Modulation Technique: QUADRAPHASE; Construction: COMPONENT;
UPC8126GR-E1
Renesas Electronics
MODULATOR; Minimum Operating Frequency: 915 MHz; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Maximum Voltage Standing Wave Ratio: 1.5; Maximum Input Power (CW): -9 dBm;
MAX2022ETX+
Analog Devices' MAX2022ETX+ is a RF modulator with 10 dBm CW input power, operating from -40 to 85°C. It supports quadrature phase modulation b/w 1500-2500 MHz frequencies, ideal for RF/microwave applications requiring high performance and reliability. The device features a characteristic impedance of 50 ohms and matte tin terminal finish for robust construction.
UPC8191K
MODULATOR; Construction: COMPONENT; Terminal Finish: Tin/Lead (Sn/Pb); Modulation Technique: I/Q; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel;
HMC597LP4
HMC597LP4 by Analog Devices is an RF demodulator with a max input power of 12 dBm, operating from -40°C to 85°C. It features I/Q modulation, operates b/w 100 MHz to 4 GHz, and has a characteristic impedance of 50 ohms. Ideal for RF/microwave applications requiring high-frequency demodulation capabilities.
ADL5380ACPZ-R7
ADL5380ACPZ-R7 by Analog Devices is an RF demodulator with I/Q modulation, operating from 400MHz to 6GHz. It has a max input power of 15dBm and operates b/w -40°C to 85°C. Ideal for RF/microwave applications requiring high-frequency demodulation.
F1653NLGI8
MODULATOR; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
AD8346ARU
AD8346ARU by Analog Devices is an RF modulator with 10 dBm CW input power, 1.25 VSWR, and I/Q modulation. It operates b/w -40 °C to 85°C and covers frequencies from 800 MHz to 2500 MHz. Ideal for RF/microwave applications requiring precise modulation/demodulation capabilities.
HMC630LP3TR
Analog Devices' HMC630LP3TR is a RF modulator with 16 terminals, operating from 700 MHz to 1000 MHz. It has a CW input power of 27 dBm and VSWR of 1.33, suitable for vector modulation applications in temperatures ranging from -40 °C to 85°C. The device utilizes GaAs technology and surface mounting feature for easy integration.
AD8349AREZ-RL7
AD8349AREZ-RL7 by Analog Devices is an RF modulator with QPSK modulation, operating from -40 to 85 °C. It has a frequency range of 700-2700 MHz and 50 ohm impedance. Ideal for RF/Microwave applications requiring precise modulation/demodulation in various temperature conditions.
LT5506EUF#PBF
LT5506EUF#PBF by Analog Devices is a RF/Microwave Demodulator with Quadrature Phase Modulation. It operates b/w -40°C to 85°C, covering frequencies from 40MHz to 500MHz. Ideal for applications requiring precise demodulation in a 100 ohm impedance environment.
ADL5385ACPZ-R7
ADL5385ACPZ-R7 by Analog Devices is a RF modulator with 50 ohm impedance, operating from 50 MHz to 2200 MHz. It supports quadrature phase modulation and can handle up to 13 dBm CW input power. Ideal for RF/microwave applications requiring precise modulation techniques in temperature range of -40°C to 85°C.
LT5502EGN#TR
LT5502EGN#TR by Analog Devices is an RF demodulator with a max input power of 10 dBm, operating frequency range from 70 MHz to 400 MHz, and characteristic impedance of 50 ohm. It utilizes quadrature phase modulation technique and can withstand temperatures from -40 °C to 85°C. Ideal for RF/microwave applications requiring precise demodulation in various environments.
AD8346ARU-REEL7
AD8346ARU-REEL7 by Analog Devices is an RF modulator with 800-2500 MHz frequency range, 10 dBm CW input power, and 1.25 VSWR. It utilizes I/Q modulation technique for various RF/microwave applications in a temperature range of -40 to 85 °C.
HMC630LP3E
Analog Devices' HMC630LP3E is a RF/Microwave Modulator with 27 dBm CW input power, VECTOR modulation, and 50 ohm impedance. It operates b/w -40°C to 85°C, suitable for applications requiring MODULATION in the frequency range of 700-1000 MHz.
SKY73009-11
Skyworks Solutions
SKY73009-11 by Skyworks Solutions is a RF/Microwave demodulator with 32 terminals. It operates b/w 400 MHz to 3 GHz, handling up to 18 dBm CW power. Ideal for Quadrature Phase Modulation applications due to its low VSWR of 2 and CMOS technology.
TDA8040T-T
DEMODULATOR; Minimum Operating Temperature: 0 Cel; Construction: COMPONENT; Minimum Operating Frequency: 21.4 MHz; Maximum Operating Temperature: 70 Cel; Modulation Technique: I/Q;
ADL5374ACPZ-WP
ADL5374ACPZ-WP by Analog Devices is a RF modulator with Quadrature Phase modulation, operating b/w -40°C to 85°C. It has a frequency range of 3-4 GHz and characteristic impedance of 50 ohm. Ideal for RF/Microwave applications requiring precise modulation techniques.
HMC631LP3TR
MODULATOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Hittite Microwave
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved