Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
Median Price
$145.130
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Verical
1+ parts
$142.320
100+ parts
$140.900
1k+ parts
-
10k+ parts
Mouser Electronics
$207.230
$174.930
Chip1Stop
$147.940
Arrow
Digiode
$116.042
Nova Conductors
$158.137
NAC Semi
$390.000
Vyrian
Component Sense
Parana Technologies
$2.056
$1.912
Aztec Data Supply Inc.
$2.140
IDEA Electronic Components Group
$2.211
$2.100
Corohmni
$2.223
Advanced Electronics
$2.504
$2.279
$2.053
DigiPath Technology Company
$3.449
$3.311
AZTECH Wire
$11.099
Semicontronic
$103.830
$101.234
$100.715
Corphita
$109.935
Continental Prestige Electronics
$139.230
$124.960
Aranea Global
$154.974
$148.775
Ampacity Inc.
$225.980
QUARKTWIN TECHNOLOGY LTD
Argo Parts USA
Lixinc
Perfect Parts
Authorized Procurement Solutions
RF & Microwave Amplifiers HMC606LC5 attributes and parameters. Explore more RF & Microwave Amplifiers devices from Hittite Microwave
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
Terminal Finish:
HMC606LC5 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
Taiwan Semiconductor
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Semiconductor
Weitron Technology
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Rectron
BGU6101,147
NXP Semiconductors
The NXP Semiconductors BGU6101,147 is a wide band low power RF amplifier with 4dB gain. It operates b/w 40MHz to 4000MHz, suitable for various RF and microwave applications. With a max supply current of 10mA and operating temperature range from -40°C to 85°C, it is ideal for surface mount installations.
ADL8142ACPZN
Analog Devices
ADL8142ACPZN by Analog Devices is a PHEMT RF amplifier with 24.5 dB gain, operating b/w 23-31 GHz. It has a max input power of 20 dBm and VSWR of 1.38, suitable for wideband low-power applications in RF & microwave systems. With surface mounting feature, it operates from -40 to 85°C with a characteristic impedance of 50 ohms.
RF3827SR
Rf Micro Devices
WIDE BAND MEDIUM POWER; Maximum Voltage Standing Wave Ratio: 20; Construction: COMPONENT; Gain: 20.5 dB; Maximum Input Power (CW): 13 dBm; Additional Features: LOW NOISE;
MW7IC2750NBR1
The NXP Semiconductors MW7IC2750NBR1 is a narrow band high power RF amplifier with a gain of 24 dB. It operates within the frequency range of 2500-2700 MHz and can handle a max input power of 30 dBm. This component is suitable for applications requiring high power amplification in RF and microwave systems.
RA20H8994M-101
Mitsubishi Electric
Mitsubishi Electric's RA20H8994M-101 is a plastic/epoxy RF amplifier module with 20 dBm CW input power, VSWR of 3, and operating frequency range of 896-941 MHz. Ideal for narrowband high-power applications, it operates at temperatures from -30 to 110°C with hybrid technology and characteristic impedance of 50 ohms.
HMC441LP3
HMC441LP3 by Analog Devices is a wide band low power RF amplifier with 10 dB gain and 50 ohm impedance. Operating from 6.5 GHz to 13.5 GHz, it has a max input power of 15 dBm and requires a 5V supply at 115 mA. Ideal for applications requiring high frequency amplification in RF and microwave systems.
MGA-62563-BLKG
Broadcom
Broadcom's MGA-62563-BLKG is a GAAS RF amplifier with 20.4 dB gain, operating from 100 MHz to 3 GHz. It has a max input power of 21 dBm and VSWR of 2, suitable for wideband low-power applications in RF & microwave systems. The component features a plastic/epoxy package body, matte tin terminals, and requires 3-5V power supply at 77 mA.
MGA-72543-TR2G
Broadcom's MGA-72543-TR2G is a GAAS RF amplifier with 9.2 dB gain, operating from 100 MHz to 6 GHz. It has a max input power of 20 dBm and VSWR of 2.1, suitable for wideband low-power applications in RF and microwave systems.
MGA-62563-TR1G
Broadcom's MGA-62563-TR1G is a GAAS RF amplifier with 20.4 dB gain, operating from 100 MHz to 3 GHz. It has a max input power of 21 dBm and VSWR of 2, suitable for wideband low-power applications in RF and microwave systems. The component features a plastic/epoxy package, surface mounting, and requires 3-5V power supply with a max current draw of 77 mA.
MMG15241HT1
Freescale Semiconductor
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 50 ohm; Maximum Supply Current: 105 mA;
MAX2630EUS+T
Maxim Integrated
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Voltage Standing Wave Ratio: 1.25;
MSA-1105-TR1
Hewlett Packard
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -25 Cel;
ALM-32220
ALM-32220 by Broadcom is a wide band high power RF amplifier with 13.5 dB gain, operating from 1700 to 2700 MHz. It can handle up to 28 dBm CW input power and has a characteristic impedance of 50 ohm. Ideal for applications requiring high power amplification in RF & Microwave systems.
HMC618LP3ETR
Hittite Microwave
NARROW BAND LOW POWER;
SGL0363Z
Qorvo
Qorvo's SGL0363Z is a wide band low power RF amplifier with 15 dB gain and 50 ohm impedance. It operates from 5 MHz to 2 GHz, handling up to 18 dBm CW input power. Ideal for RF applications requiring high performance in temperatures ranging from -40°C to 85°C.
CMPA2735075F1
Wolfspeed
NARROW BAND HIGH POWER;
HMC608LC4
WIDE BAND MEDIUM POWER; Gain: 27 dB; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 9500 MHz;
QPA1019D
Qorvo's QPA1019D is a GAN technology RF amplifier with 34.4 dB gain, 25 dBm CW input power, and 4 VSWR. Ideal for wideband high-power applications from 4500 MHz to 7000 MHz, it operates at temperatures ranging from -40°C to 85°C.
MSA-0686-BLK
Agilent Technologies
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Frequency: 800 MHz;
ADL5521ACPZ-R7
ADL5521ACPZ-R7 by Analog Devices is a wide band low power RF amplifier with a gain of 10.5 dB, operating frequency range from 400 MHz to 4000 MHz, and max input power of 20 dBm. It is constructed using GaAs technology, has a characteristic impedance of 50 ohm, and is suitable for applications requiring high-frequency amplification in RF and microwave systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC637ALP5ETR
Analog Devices' HMC637ALP5ETR is a wide band medium power RF amplifier with 12 dB gain and 25 dBm CW input power. Operating from -40 to 85°C, it covers frequencies from 0 to 6000 MHz. Ideal for RF and microwave applications requiring high performance in a compact component package.
HMC608LC4TR
Analog Devices' HMC608LC4TR is a GAAS RF amplifier with 24 terminals, operating from -40 to 85°C. It has a power supply of 5V and max current of 350mA, suitable for wideband medium-power applications in surface-mount setups.
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; No. of Functions: 1;
HMC637ALP5E
HMC637ALP5E by Analog Devices is a wide band medium power RF amplifier with a gain of 12 dB. It has a max input power of 25 dBm and operates in temperatures ranging from -40 to 85°C. This component is suitable for applications requiring amplification in the frequency range of 0-6000 MHz.
WIDE BAND MEDIUM POWER; Minimum Operating Temperature: -40 Cel; Gain: 12 dB; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 6000 MHz; Minimum Operating Frequency: 0 MHz;
WIDE BAND MEDIUM POWER; Terminal Finish: TUNGSTEN NICKEL GOLD; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 9500 MHz;
HMC635LC4TR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Maximum Operating Temperature: 70 Cel;
HMC634LC4
WIDE BAND LOW POWER; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 10 dBm; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 5000 MHz;
HMC634LC4 by Analog Devices is a wide band low power RF amplifier with 17 dB gain, operating frequency range of 5-20 GHz. It features a max input power of 10 dBm, ceramic package body material, and gold over nickel terminal finish. Ideal for applications requiring high-frequency amplification in RF and microwave systems.
HMC634LC4TR
WIDE BAND LOW POWER; Minimum Operating Frequency: 5000 MHz; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 10 dBm; Construction: COMPONENT; Maximum Operating Frequency: 20000 MHz;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Construction: COMPONENT;
HMC634LC4TR-R5
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC636ST89
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Terminal Finish: TIN LEAD;
HMC635LC4
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Power Supplies (V): 5;
HMC6981LS6
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC; Technology: PHEMT; Gain: 23 dB;
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC; Technology: GAAS; Power Supplies (V): 6;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved