Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Maximum Operating Frequency: 26000 MHz;
Median Price
$94.980
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Rochester
1+ parts
$66.140
100+ parts
$62.170
1k+ parts
$56.220
10k+ parts
-
Arrow
$71.790
$60.910
Farnell
$83.050
$63.130
Mouser Electronics
$74.170
Newark
$101.630
$83.660
DigiKey
$103.620
$87.776
Analog Devices Inc
$81.014
$52.150
Verical
$57.044
Element14
$112.060
Digiode
$61.978
Vyrian
Chip Stock
Mil-Aero Solutions, Inc.
Parana Technologies
$2.481
$2.308
IDEA Electronic Components Group
$2.668
$2.535
DigiPath Technology Company
$4.162
$3.996
Corphita
$58.716
Continental Prestige Electronics
$60.720
$51.960
Semicontronic
$107.520
$104.832
$104.294
Lixinc
RC Electronics
$53.400
$48.450
$46.750
Authorized Procurement Solutions
RF & Microwave Amplifiers HMC517LC4TR attributes and parameters. Explore more RF & Microwave Amplifiers devices from Hittite Microwave
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
General Transistor
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Plessey Semiconductors Discrete Components Div
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tesla Elektronicke Soucastky
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
HMC564LC4TR-R5
Analog Devices
Analog Devices' HMC564LC4TR-R5 is a wide band low power RF amplifier with 14 dB gain and 20 dBm CW input power. Operating from -40 to 85°C, it covers frequencies from 7-14 GHz. Ideal for RF & microwave applications requiring high performance in a compact component package.
HMC505LP4E
Analog Devices' HMC505LP4E is a RF amplifier with 50 ohm impedance, operating frequency range of 6800-7400 MHz, and VSWR of 2. Ideal for narrowband low-power applications in temperatures from -40 to 85°C. Package: PLASTIC/EPOXY, Technology: BIPOLAR, Mounting: SURFACE MOUNT.
GALI-51+
Mini-circuits
GALI-51+ by Mini-circuits is a wide band low power RF amplifier with 14 dB gain and 1.7 VSWR. It operates from 0 to 4000 MHz, suitable for various RF applications. With a compact plastic/epoxy package, it can handle up to 13 dBm input power and supports surface mounting.
ZHL-1-2W+
ZHL-1-2W+ by Mini-circuits is a wide band medium power RF amplifier with a gain of 29 dB. It has a max input power of 10 dBm and can operate in temperatures ranging from -20 to 65 °C. This coaxial amplifier is suitable for applications requiring amplification in the frequency range of 5 MHz to 500 MHz.
BGA2003,115
NXP Semiconductors
The NXP Semiconductors BGA2003,115 is a RF & Microwave Amplifier with 16 dB gain and operates b/w 900-1800 MHz. It has a wide band low power technology, 50 ohm impedance, and requires a 2.5V power supply at max 15 mA current. Ideal for applications requiring high frequency amplification in components like plastic/epoxy packages.
QPA2612
Qorvo
Qorvo's QPA2612 is a GAN technology RF amplifier with 34.2 dB gain, operating from 8-12 GHz. It offers 21 dBm CW input power, VSWR of 4, and is ideal for wideband high-power applications in surface-mount configurations.
MAAM28000-A1G
TE Connectivity
MAAM28000-A1G by TE Connectivity is a GAAS RF amplifier with 10V power supply, 8 terminals, and max operating temp of 100°C. Its ceramic package body material and surface mounting feature make it ideal for high-frequency applications in telecommunications and radar systems.
PMA3-83LN+
The Mini-circuits PMA3-83LN+ is a wide band low power RF amplifier with a gain of 19.9 dB, suitable for frequencies ranging from 500 MHz to 8000 MHz. It can handle a max input power of 16 dBm and operates in temperatures from -40°C to 105°C. Ideal for RF and microwave applications requiring high gain and broad frequency coverage.
ERA-5SM
ERA-5SM by Mini-circuits is a wide band low power RF amplifier with 16 dB gain, operating from 0 to 4000 MHz. It has a max input power of 13 dBm and VSWR of 1.3, suitable for RF & microwave applications requiring compact surface mount amplification.
RFPA3800TR7
Rf Micro Devices
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Additional Features: LOW NOISE;
HMC311SC70ETR
Analog Devices' HMC311SC70ETR is a GAAS RF amplifier with 11dB gain, operating from 0-8000MHz. It has a max input power of 10dBm and requires a 5V supply, making it ideal for wideband low-power applications in RF & microwave systems. The component is surface-mountable and operates b/w -40 to 85°C.
A64
Tyco Electronics M/a-com
WIDE BAND LOW POWER; Construction: COMPONENT; Maximum Operating Frequency: 1200 MHz; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 6 dBm; Minimum Operating Frequency: 10 MHz;
HMC1040LP3CE
HMC1040LP3CE by Analog Devices is a wide band low power RF amplifier with 17 dB gain and 50 ohm impedance. It operates from 24 to 43.5 GHz, with a max input power of 5 dBm and a supply current of 85 mA. This PHEMT technology component is ideal for RF and microwave applications requiring high performance in a compact package.
HMC391LP4E
Hittite Microwave
NARROW BAND LOW POWER; Terminal Finish: Matte Tin (Sn); Maximum Voltage Standing Wave Ratio: 2; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 4450 MHz; JESD-609 Code: e3;
GALI-21+
GALI-21+ by Mini-circuits is a wideband low power RF amplifier with 11.5 dB gain, suitable for frequencies from 0 to 8000 MHz. It has a max input power of 15 dBm and VSWR of 2.5, making it ideal for RF and microwave applications requiring compact surface-mount components.
SGA2463Z
SGA2463Z by Qorvo is a wide band low power RF amplifier with 18 dB gain and 50 ohm impedance. It operates from 0 to 5000 MHz, with a max input power of 18 dBm. This component is ideal for RF and microwave applications requiring surface mount construction.
HMC453ST89ETR
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; No. of Functions: 1;
HMC-ALH244
WIDE BAND LOW POWER; Maximum Operating Frequency: 40000 MHz; Minimum Operating Temperature: -55 Cel; Additional Features: LOW NOISE; JESD-609 Code: e4; Minimum Operating Frequency: 24000 MHz;
MGA-81563-TR1
Broadcom
Broadcom's MGA-81563-TR1 is a GAAS RF amplifier with 10.5 dB gain, operating from 100 MHz to 6 GHz. It has a max input power of 13 dBm and VSWR of 2, suitable for wideband low-power applications in RF and microwave systems. The component is housed in a plastic/epoxy package, operates at temperatures b/w -40°C to 85°C, and requires a 3V power supply.
HMC8411LP2FE
Analog Devices' HMC8411LP2FE is a wide band low power RF amplifier with 11 dB gain and 20 dBm CW input power. Operating from 10 MHz to 10 GHz, it is ideal for RF & microwave applications requiring high performance in temperatures ranging from -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved