Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND MEDIUM POWER; Construction: COMPONENT; Minimum Operating Frequency: 3000 MHz; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 15 dBm; JESD-609 Code: e3;
Median Price
$23.540
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$22.500
100+ parts
$17.030
1k+ parts
-
10k+ parts
Mouser Electronics
$24.580
$18.750
$17.290
Analog Devices Inc
$24.680
$18.945
$12.110
Verical
$14.978
DigiKey
Maritex
$9.544
$5.006
Digiode
$17.946
Nova Conductors
$18.165
Cyclops Electronics Ltd
Vyrian
Chip Stock
Touchstone Systems
Connect4Technologies Inc.
Aztec Data Supply Inc.
$0.858
Parana Technologies
$1.009
$0.938
IDEA Electronic Components Group
$1.085
$1.031
DigiPath Technology Company
$1.693
$1.625
Corohmni
$16.110
Corphita
$17.001
Netroflash
Semicontronic
$20.980
$20.456
$20.351
RC Electronics
$4.150
$3.770
$3.640
Perfect Parts
Epart123
$3.850
GreenTree Electronics
Argo Parts USA
Lixinc
Futuretech Components
Authorized Procurement Solutions
iodParts Technologies Inc.
Kepictronics
Continental Prestige Electronics
$15.520
RF & Microwave Amplifiers HMC326MS8GETR attributes and parameters. Explore more RF & Microwave Amplifiers devices from Hittite Microwave
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
HMC326MS8GETR RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Dev Site Transfer 6/May/2019
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
EU2B-YS303C
Idec
ROTARY SWITCH;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
Cheng-yi Electronic
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Synsemi
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Toshiba
Eic Semiconductor
Digitron Semiconductors
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ECG008B-G
Triquint Semiconductor
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 7.2;
HMC606LC5TR-R5
Analog Devices
Analog Devices' HMC606LC5TR-R5 is a wide band low power RF amplifier with 9.5 dB gain, suitable for frequencies ranging from 2-18 GHz. It can handle up to 15 dBm CW input power and operates in temperatures from -40 to 85°C. Ideal for RF and microwave applications requiring high performance in a compact component design.
HMC498LC4
Analog Devices' HMC498LC4 is a GAAS RF amplifier with 18dB gain, operating from 17-24GHz. It has a max input power of 10dBm and operates on a 5V supply. This wideband medium-power device is ideal for RF and microwave applications requiring high performance in a compact ceramic package.
ADL8142ACPZN-CSL
WIDE BAND LOW POWER;
BGA616H6327XTSA1
Infineon Technologies
Infineon's BGA616H6327XTSA1 is a wide band low power RF amplifier with 18dB gain and 10dBm CW input power. Operating from -65°C to 150°C, it covers frequencies from 0MHz to 2700MHz. Ideal for applications requiring high performance in RF & microwave amplification.
HMC564LC4TR-R5
Analog Devices' HMC564LC4TR-R5 is a wide band low power RF amplifier with 14 dB gain and 20 dBm CW input power. Operating from -40 to 85°C, it covers frequencies from 7-14 GHz. Ideal for RF & microwave applications requiring high performance in a compact component package.
AC1226
Teledyne Technologies
WIDE BAND LOW POWER; Minimum Operating Frequency: 10 MHz; Additional Features: I/P POWER-MAX (PEAK)=27DBM; Maximum Operating Frequency: 1200 MHz; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm;
MAAM28000-A1G
M/a-com Technology Solutions
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: CERAMIC; Technology: GAAS; Construction: COMPONENT;
HMC960LP4ETR
Analog Devices' HMC960LP4ETR is a wide band high power RF amplifier with 0 dB gain, operating from 0 to 100 MHz. It has 24 terminals, matte tin finish, and operates b/w -40°C to +85°C. Ideal for applications requiring surface mount components in RF and microwave systems.
HMC409LP4E
Hittite Microwave
NARROW BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Gain: 28 dB;
HMC608LC4TR
Analog Devices' HMC608LC4TR is a GAAS RF amplifier with 24 terminals, operating from -40 to 85°C. It has a power supply of 5V and max current of 350mA, suitable for wideband medium-power applications in surface-mount setups.
CMD328K3
Qorvo
NBB-400-SR
Rf Micro Devices
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: CERAMIC; Technology: BIPOLAR; Maximum Operating Temperature: 85 Cel;
HELA-10B
Mini-circuits
HELA-10B by Mini-circuits is a wide band medium power RF amplifier with 9.5 dB gain, operating from 50 MHz to 1000 MHz. It can handle up to 20 dBm CW input power and has a VSWR of 1.22, making it suitable for various RF and microwave applications requiring high performance amplification in a compact form factor.
HMC499LC4
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Gain: 9 dB;
HMC441LH5
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: CERAMIC; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
MGA-86576
Agilent Technologies
Agilent Technologies' MGA-86576 is a RF & Microwave Amplifier with GaAs technology, 5V power supply, and 22mA max current. It has a metal package for surface mount applications in various electronic devices.
LMV221SDX/NOPB
National Semiconductor
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel;
QPA2612TR7
Qorvo's QPA2612TR7 is a GAN technology RF amplifier with 34.2 dB gain, operating from 8-12 GHz. It offers 21 dBm CW input power handling and VSWR of 4, suitable for wideband high-power applications in RF & microwave systems. The component has 24 terminals and surface-mounting feature in a plastic/epoxy package body.
HMC465LP5E
Analog Devices' HMC465LP5E is a wide band low power RF amplifier with 9.5 dB gain and 50 ohm impedance. Operating from 0 to 20000 MHz, it handles up to 23 dBm CW input power. Ideal for RF and microwave applications requiring high performance in plastic/epoxy package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC326MS8GETR
Analog Devices' HMC326MS8GETR is a wide band medium power RF amplifier with 18dB gain and 50 ohm impedance. It operates from 3-4.5GHz, handles up to 15dBm input power, and requires a 5V supply. Ideal for RF & microwave applications requiring high performance in a compact surface mount package.
HMC311SC70ETR
Analog Devices' HMC311SC70ETR is a GAAS RF amplifier with 11dB gain, operating from 0-8000MHz. It has a max input power of 10dBm and requires a 5V supply, making it ideal for wideband low-power applications in RF & microwave systems. The component is surface-mountable and operates b/w -40 to 85°C.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 0 MHz;
HMC326MS8GE
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 4500 MHz;
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSSOP8,.19;
HMC3653LP3BE
WIDE BAND LOW POWER; Technology: BIPOLAR; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Additional Features: LOW NOISE; Characteristic Impedance: 50 ohm;
WIDE BAND LOW POWER; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn); Construction: COMPONENT; Characteristic Impedance: 50 ohm;
HMC392ALC4
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Technology: GAAS; No. of Functions: 1; Additional Features: HIGH RELIABILITY;
HMC3653LP3BETR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 5;
HMC311SC70E
HMC311SC70E by Analog Devices is a GAAS RF amplifier with 11 dB gain, operating from 0 to 8000 MHz. It has a max input power of 10 dBm and operates on a 5V supply with a current draw of 74 mA. Ideal for wideband low-power applications requiring surface mount installation in temperatures ranging from -40 to 85°C.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Gain: 11 dB;
HMC372LP3E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Terminal Finish: MATTE TIN;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC372LP3ETR
HMC372LP3ETR by Analog Devices is a wide band low power RF amplifier with 1 function and 16 terminals. It operates at temperatures ranging from -40 to 85°C and requires a 5V power supply. This surface mount device is made of plastic/epoxy and is commonly used in RF and microwave applications.
HMC374SC70E
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSSOP6,.08;
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 15 dBm;
HMC327MS8G
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
HMC326MS8G
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 3000 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved