Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC3653LP3BETR is a wide band low power RF amplifier with 12 terminals, operating from 7-15 GHz. It has a supply voltage of 5V and consumes up to 55mA current. Suitable for RF & microwave applications, it offers bipolar technology in a surface mount package.
Median Price
$35.300
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Farnell
1+ parts
100+ parts
$28.340
1k+ parts
$27.760
10k+ parts
-
Element14
$59.180
$45.650
$43.540
Verical
$22.375
Nova Conductors
$27.135
Digiode
$28.438
Chip Stock
NexGen Digital
Vyrian
EPE Components Inc.
Bristol Electronics
Cyclops Electronics Ltd
Corohmni
$1.010
Aztec Data Supply Inc.
$1.267
Parana Technologies
$2.087
$1.941
IDEA Electronic Components Group
$2.244
$2.132
DigiPath Technology Company
$3.501
$3.361
Component Stockers USA
$21.300
$23.700
Ampacity Inc.
$21.970
Semicontronic
$21.421
$21.311
Corphita
$26.942
Advanced Electronics
$27.678
Continental Prestige Electronics
$29.640
$23.180
Authorized Procurement Solutions
Lixinc
Argo Parts USA
Netroflash
$26.592
$25.778
$25.236
This material provides durability and protection for the internal components of the amplifier, ensuring a longer lifespan.
Low power supply requirement makes this amplifier energy-efficient and cost-effective to operate.
Having more terminals allows for greater connectivity options, making this amplifier versatile and suitable for a variety of applications.
With a high maximum operating temperature, this amplifier can withstand rigorous conditions without compromising performance.
The wide range of operating temperatures ensures that this amplifier can function in both extreme heat and cold environments.
Matte tin finish on the terminals provides good conductivity and resistance to corrosion, ensuring stable performance over time.
Bipolar technology offers high gain and low noise characteristics, making this amplifier ideal for sensitive signal amplification applications.
Low supply current consumption minimizes power loss and heat generation, contributing to the overall efficiency of the amplifier.
Wide band coverage and low power consumption make this amplifier suitable for a range of RF and microwave applications while maintaining energy efficiency.
The ability to operate at a low frequency of 7000 MHz enables this amplifier to amplify signals across a wide spectrum, making it versatile for various frequency bands.
Surface mount design facilitates easy installation and integration into electronic circuit boards, saving space and simplifying assembly.
High maximum operating frequency allows for amplification of signals in the microwave frequency range, making this amplifier suitable for high-frequency applications.
RF & Microwave Amplifiers HMC3653LP3BETR attributes and parameters. Explore more RF & Microwave Amplifiers devices from Analog Devices
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
Terminal Finish:
HMC3653LP3BETR RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
Nte Electronics
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Eic Semiconductor
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LM358DT
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
CC2590RGVR
CC2590RGVR by Texas Instruments is a 16-terminal RF amplifier with a gain of 14.1 dB, operating b/w 2400-2483.5 MHz. It has a max input power of 10 dBm and operates on a 3V power supply. Ideal for narrowband low-power applications requiring surface mounting in temperatures ranging from -40 to 85°C.
HMC441LH5TR
Hittite Microwave
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
PMA3-83LN+
Mini-circuits
The Mini-circuits PMA3-83LN+ is a wide band low power RF amplifier with a gain of 19.9 dB, suitable for frequencies ranging from 500 MHz to 8000 MHz. It can handle a max input power of 16 dBm and operates in temperatures from -40°C to 105°C. Ideal for RF and microwave applications requiring high gain and broad frequency coverage.
RA07H4047M-101
Mitsubishi Electric
Mitsubishi Electric's RA07H4047M-101 is a plastic/epoxy RF amplifier module with 14.77 dBm CW input power, 4 VSWR, and operating frequency range of 400-470 MHz. Ideal for narrowband high-power applications, it operates at temperatures from -30 to 90°C with hybrid technology and requires 3.5-12.5V power supplies.
HMC788ALP2E
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 10000 MHz; Characteristic Impedance: 50 ohm; Construction: COMPONENT;
HMC564LC4TR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Maximum Input Power (CW): 5 dBm;
HMC475ST89E
Analog Devices
HMC475ST89E by Analog Devices is a wide band low power RF amplifier with 9 dB gain and 50 ohm impedance. It operates from 0 to 4500 MHz, handling up to 17 dBm CW input power. This component is ideal for RF and microwave applications requiring surface mount technology in the temperature range of -40°C to 85°C.
MGA-61563-TR2G
Broadcom
Broadcom's MGA-61563-TR2G is a GAAS RF amplifier with 6.9dB gain, operating from 100MHz to 6GHz. It has a max input power of 18dBm and VSWR of 2, suitable for wideband low-power applications. This surface-mount component with matte tin finish offers high performance in RF and microwave systems.
HMC372LP3E
Analog Devices' HMC372LP3E is a wide band low power RF amplifier with 11.5 dB gain, operating from 700 MHz to 1000 MHz. It has a max input power of 15 dBm and operates on a 5V power supply. This component is ideal for RF and microwave applications requiring high performance in plastic/epoxy package.
HMC1040LP3CE
HMC1040LP3CE by Analog Devices is a wide band low power RF amplifier with 17 dB gain and 50 ohm impedance. It operates from 24 to 43.5 GHz, with a max input power of 5 dBm and a supply current of 85 mA. This PHEMT technology component is ideal for RF and microwave applications requiring high performance in a compact package.
HMC462LP5E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 5;
HMC794LP3ETR
WIDE BAND LOW POWER;
SBB2089ZSR
Rf Micro Devices
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
TGF2023-20
Triquint Semiconductor
WIDE BAND HIGH POWER; Maximum Operating Frequency: 18000 MHz; JESD-609 Code: e3/e4; Terminal Finish: MATTE TIN/GOLD; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 43 dBm;
MSA-1105-TR1G
Agilent Technologies
WIDE BAND LOW POWER; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 1300 MHz; JESD-609 Code: e3; Maximum Voltage Standing Wave Ratio: 1.7; Gain: 10 dB;
HMC441LP3
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 6500 MHz;
SBB-5089Z
Sirenza Microdevices
Sirenza Microdevices' SBB-5089Z is a GAAS RF amplifier with 14.5 dB gain, operating from 50 MHz to 6 GHz. It has a max input power of 12 dBm and operates on a 5V supply, making it ideal for wideband low-power applications in RF and microwave systems. The component is designed for surface mount installation and can withstand temperatures ranging from -40°C to 85°C.
HMC634LC4
HMC634LC4 by Analog Devices is a wide band low power RF amplifier with 17 dB gain, operating frequency range of 5-20 GHz. It features a max input power of 10 dBm, ceramic package body material, and gold over nickel terminal finish. Ideal for applications requiring high-frequency amplification in RF and microwave systems.
HMC478MP86E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Frequency: 0 MHz;
HMC717ALP3E
Analog Devices' HMC717ALP3E is a wide band low power RF amplifier with 11 dB gain, operating from 4.8 GHz to 6 GHz. It has a max input power of 20 dBm and VSWR of 1.43, suitable for applications requiring high frequency amplification in RF & microwave systems. The component is housed in a plastic/epoxy package with matte tin finish, featuring PHEMT technology and surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
HMC326MS8GETR
WIDE BAND MEDIUM POWER; Construction: COMPONENT; Minimum Operating Frequency: 3000 MHz; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 15 dBm; JESD-609 Code: e3;
Analog Devices' HMC326MS8GETR is a wide band medium power RF amplifier with 18dB gain and 50 ohm impedance. It operates from 3-4.5GHz, handles up to 15dBm input power, and requires a 5V supply. Ideal for RF & microwave applications requiring high performance in a compact surface mount package.
HMC311SC70ETR
Analog Devices' HMC311SC70ETR is a GAAS RF amplifier with 11dB gain, operating from 0-8000MHz. It has a max input power of 10dBm and requires a 5V supply, making it ideal for wideband low-power applications in RF & microwave systems. The component is surface-mountable and operates b/w -40 to 85°C.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 0 MHz;
HMC326MS8GE
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 4500 MHz;
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSSOP8,.19;
HMC3653LP3BE
WIDE BAND LOW POWER; Technology: BIPOLAR; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Additional Features: LOW NOISE; Characteristic Impedance: 50 ohm;
WIDE BAND LOW POWER; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn); Construction: COMPONENT; Characteristic Impedance: 50 ohm;
HMC392ALC4
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Technology: GAAS; No. of Functions: 1; Additional Features: HIGH RELIABILITY;
HMC3653LP3BETR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 5;
HMC311SC70E
HMC311SC70E by Analog Devices is a GAAS RF amplifier with 11 dB gain, operating from 0 to 8000 MHz. It has a max input power of 10 dBm and operates on a 5V supply with a current draw of 74 mA. Ideal for wideband low-power applications requiring surface mount installation in temperatures ranging from -40 to 85°C.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Gain: 11 dB;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Terminal Finish: MATTE TIN;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC372LP3ETR
HMC372LP3ETR by Analog Devices is a wide band low power RF amplifier with 1 function and 16 terminals. It operates at temperatures ranging from -40 to 85°C and requires a 5V power supply. This surface mount device is made of plastic/epoxy and is commonly used in RF and microwave applications.
HMC374SC70E
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSSOP6,.08;
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 15 dBm;
HMC327MS8G
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved