Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DOUBLE BALANCED; Minimum Operating Temperature: -55 Cel; Additional Features: HIGH ISOLATION; JESD-609 Code: e4; Maximum Conversion Loss: 12 dB; Maximum Operating Temperature: 85 Cel;
Median Price
$44.830
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Chip Stock
Advanced Electronics
$2.355
$2.143
$1.931
Parana Technologies
$2.783
$2.588
IDEA Electronic Components Group
$2.992
$2.842
DigiPath Technology Company
$4.668
$4.481
Ampacity Inc.
$40.110
Semicontronic
$39.107
$38.907
Corphita
$42.471
Component Stockers USA
$99.990
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
RC Electronics
Authorized Procurement Solutions
RF/Microwave Mixers HMC338 attributes and parameters. Explore more RF/Microwave Mixers devices from Hittite Microwave
Additional Features:
Characteristic Impedance:
Construction:
Maximum Conversion Loss:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
HMC338 RF & Microwave trade compliance attributes, and parameters.
ECCN
5A991.B
ECCN Governance
EAR
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Promax-johnton
MCA1-12GL
Mini-circuits
MCA1-12GL by Mini-circuits is a RF/Microwave Mixer with max input power of 17 dBm, VSWR of 4.18, and conversion loss of 9.2 dB. Ideal for applications requiring double balanced devices operating b/w 3.8-12 GHz with a temp range from -55 to 100°C.
AMMP-6530-TR1
Broadcom
AMMP-6530-TR1 by Broadcom is an RF/Microwave Mixer with a max input power of 25 dBm and 50 ohm characteristic impedance. It operates b/w 5000-30000 MHz, featuring image rejection technology and a max conversion loss of 8 dB. Ideal for surface mount applications in various communication systems.
AMMC-6545
SINGLE BALANCED;
UPC8109TB-E3-A
Renesas Electronics
DOUBLE BALANCED;
HMC220BMS8GETR
Analog Devices
Analog Devices' HMC220BMS8GETR is a RF/Microwave Mixer with 25 dBm CW input power, 85°C max temp, and 50 ohm impedance. Ideal for applications requiring double balanced mixers in the frequency range of 5-12 GHz.
HMC258LM3
Analog Devices' HMC258LM3 is a RF/Microwave Mixer with 50 ohm impedance, 14 dB max conversion loss, and 13 dBm CW input power. It operates b/w 14-20 GHz, ideal for high-frequency applications requiring double balanced components in temperatures ranging from -40 to 85°C.
HMC264LM3
Analog Devices' HMC264LM3 is a RF/Microwave Mixer with 6 terminals, operating from -40 to 85°C. It has a max input power of 13 dBm and operates at frequencies b/w 20-30 GHz. Ideal for applications requiring double balanced technology and surface mounting features.
HMC130
Analog Devices' HMC130 is a GAAS double balanced RF mixer with 50 ohm impedance. It operates from -55°C to 85°C, covering frequencies from 6 GHz to 11 GHz. Ideal for RF/microwave applications requiring low conversion loss and gold terminal finish for high performance.
HMC527LC4RTR
Analog Devices' HMC527LC4RTR is a GAAS RF/Microwave Mixer with 24 terminals in a ceramic package. It operates b/w -40°C to 85°C, making it suitable for various applications requiring surface mount technology.
CMY91E6433
Infineon Technologies
DOUBLE BALANCED; Construction: COMPONENT; Minimum Operating Frequency: 800 MHz; Maximum Operating Frequency: 2500 MHz;
MCA1-12G
MCA1-12G by Mini-circuits is a RF/Microwave Mixer with max input power of 17 dBm, VSWR of 3.58, and conversion loss of 8.5 dB. Ideal for applications requiring double balanced RF devices operating b/w 3800-12000 MHz in temperatures ranging from -55 to 100°C.
ADE-1LH+
ADE-1LH+ by Mini-circuits is a RF/Microwave Mixer with max input power of 17 dBm and VSWR of 3.01. It operates from 0.5 MHz to 500 MHz, featuring double balanced construction ideal for surface mount applications in various electronic systems.
TA8163F
Toshiba
HMC684LP4RTR
Analog Devices' HMC684LP4RTR is a BICMOS RF/Microwave Mixer with 24 terminals, operating b/w -40°C to 85°C. It requires a 5V power supply and features a surface mount package made of plastic/epoxy. Ideal for applications in communication systems and radar equipment due to its high performance and temperature range.
HMC615LP4ETR
Analog Devices' HMC615LP4ETR is a GAAS RF/Microwave Mixer with 24 terminals, operating from -40 to 85 °C. It requires a 5V power supply, draws max 75mA current, and features double balanced technology. Ideal for surface mount applications in various RF and microwave systems.
HMC423MS8TR
Analog Devices' HMC423MS8TR is a GAAS RF/Microwave Mixer with 50 ohm impedance, operating from 600 MHz to 1300 MHz. It offers a max conversion loss of 11 dB and can handle up to 13 dBm CW input power. Ideal for applications requiring double balanced mixers in surface mount packages.
TL442CJP4
TL442CJP4 by Texas Instruments is a 14-terminal RF/Microwave Mixer with ceramic package. Operating temp range: 0-70°C, technology: bipolar. Ideal for through-hole mounting in various RF applications.
HMC798LC4TR
Analog Devices' HMC798LC4TR is a ceramic RF mixer with 24 terminals, operating from -40 to 85 °C. It requires a 5V power supply and draws a max current of 125mA. Ideal for RF applications, this double balanced mixer is surface mountable for easy integration in various systems.
HMC558A-SX
HMC558A-SX by Analog Devices is a RF/Microwave Mixer with 8 terminals, operating from 5.5 to 14 GHz. It features a max input power of 25 dBm, double balanced technology, and a conversion loss of 11 dB. Ideal for applications requiring high frequency mixing in components with surface mounting feature.
HMC260A-SX
Analog Devices' HMC260A-SX is a RF/Microwave Mixer with 25 dBm CW input power, 10000-26000 MHz frequency range, and 12 dB conversion loss. Ideal for applications requiring double balanced components in temperatures from -55 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Hittite Microwave
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved