Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SP4T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
Median Price
$4.440
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Vyrian
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Chip Stock
Semi Source
Component Sense
Digiode
Prism Electronics
AZTECH Wire
$0.930
$0.890
$0.880
$0.860
Parana Technologies
$2.536
$2.359
IDEA Electronic Components Group
$2.727
$2.591
DigiPath Technology Company
$4.254
$4.084
One Stop Electronics
$16.000
Semicontronic
$23.000
$22.425
$22.310
RC Electronics
Authorized Procurement Solutions
A-Z Elektronik GmbH
Perfect Parts
Futuretech Components
Corphita
RF/Microwave Switches HMC241LP3ETR attributes and parameters. Explore more RF/Microwave Switches devices from Hittite Microwave
Compression Point (1 dB):
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
Minimum Isolation:
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Nominal On Time:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Port Termination:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
Terminal Finish:
HMC241LP3ETR RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
BAV99-7-F
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
PE42424A-Z
Psemi
PE42424A-Z by Psemi is a SPDT RF switch with 1.6 dB max insertion loss, 29 dBm CW input power, and 1.2 VSWR. It operates from 100 MHz to 8500 MHz, ideal for RF/Microwave applications requiring high isolation (24 dB) and low power consumption (0.3 mA at 3.3V).
BGS14M8U9E6327
Infineon Technologies
SP4T;
NSVG1002MXT1G
NSVG1002MXT1G by Onsemi is an RF/Microwave Switch with AEC-Q100 screening. It features a Compression Point of 30 dBm, Max Insertion Loss of 0.95 dB, and Min Isolation of 20 dB. Ideal for automotive applications due to its wide operating temperature range (-40 to 105 °C) and SP3T configuration supporting frequencies from 1-6000 MHz.
HMC245AQS16
Analog Devices
Analog Devices' HMC245AQS16 is an RF/Microwave switch with max input power of 28.51 dBm, insertion loss of 1.5 dB, and operating frequency range from 0 to 3500 MHz. It's a diversity switch ideal for applications requiring high-frequency signal routing in temperature environments ranging from -40 to 85 °C.
ADG918BCPZ-REEL7
ADG918BCPZ-REEL7 by Analog Devices is a CMOS RF/Microwave switch with 8 terminals. It offers low insertion loss of 1.25 dB and high isolation of 36 dB, making it ideal for diversity switch applications in the frequency range of 0-4000 MHz. The device operates at temperatures from -40 to 85°C and supports input power up to 17.99 dBm CW.
HMC1118LP3DE
HMC1118LP3DE by Analog Devices is an RF/Microwave Switch with a max input power of 28 dBm and compression point of 37 dBm. It operates b/w -40 to 85 °C, has a max insertion loss of 2 dB, and offers SPDT functionality. Ideal for applications requiring high-frequency switching in compact designs.
PE42540LGBC-Z
PE42540LGBC-Z by Psemi is an RF/Microwave Switch with SP4T configuration. It offers 1.6 dB max insertion loss, 30 dBm CW input power, and 1.1 VSWR. Ideal for applications requiring a wide frequency range of 0.00001-8000 MHz and operating temperatures from -40 to 85°C.
PE42359SCAA-Z
PE42359SCAA-Z by Psemi is an RF/Microwave Switch with SPDT type, 50 ohm impedance, and 1.3 dB max insertion loss. It operates b/w -40 to 105 °C temperature range and supports frequencies from 10 MHz to 3000 MHz. Ideal for applications requiring high-frequency signal routing in various electronic systems.
MASW-007072-000100
M/a-com Technology Solutions
MASW-007072-000100 by M/a-com Technology Solutions is an RF/Microwave switch with a max input power of 33.98 dBm and a max VSWR of 1.9. It operates in temperatures ranging from -40 to 85 °C and has a max insertion loss of 1.45 dB. This switch is commonly used in applications requiring SPDT functionality and a characteristic impedance of 50 ohms, within the frequency range of 0 to 3000 MHz.
TGS8122XCMX
Texas Instruments
TGS8122XCMX by Texas Instruments is an RF/Microwave SPDT switch with max input power of 34.77 dBm, VSWR of 1.2, and insertion loss of 1.4 dB. Ideal for applications requiring frequency range from 8-11 GHz due to its high performance and reliability in RF systems.
HMC-SDD112
Analog Devices' HMC-SDD112 is an RF/Microwave SPDT switch with 50 ohm impedance. It operates b/w -55°C to 85°C, covering frequencies from 55 GHz to 86 GHz. With a max insertion loss of 3 dB and gold terminal finish, it's ideal for high-frequency applications.
HMC232LP4ETR
HMC232LP4ETR by Analog Devices is a RF/Microwave Switch with 30 dBm CW input power, 27 dBm compression point, and 3.1 dB max insertion loss. It is ideal for applications requiring high-frequency switching in components with GAAS technology, offering SPDT configuration and 50 ohm impedance.
HMC550AE
Hittite Microwave
DIVERSITY SWITCH; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Additional Features: CMOS COMPATIBLE; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 6000 MHz;
HMC1118LP3DETR
Analog Devices' HMC1118LP3DETR is a RF/Microwave SPDT switch with 50 ohm impedance, offering 18 dB isolation and 2 dB insertion loss. It operates from 0.009 MHz to 13000 MHz, handles up to +28 dBm CW power, and has a compression point of +37 dBm. Ideal for applications requiring high-frequency signal routing in communication systems.
HMC245QS16ETR
HMC245QS16ETR by Analog Devices is a SP3T RF/Microwave Switch with 26.99 dBm CW input power, 1 dB max insertion loss, and 26 dB min isolation. It operates from 0 to 3500 MHz, ideal for high-frequency applications requiring fast switching times and low insertion loss in a compact surface-mount package.
UPG2027TQ-E1
Renesas Electronics
SPDT; Characteristic Impedance: 50 ohm; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Frequency: 2000 MHz; JESD-609 Code: e0; Maximum Operating Temperature: 85 Cel;
ADG918BRM-500RL7
ADG918BRM-500RL7 by Analog Devices is a CMOS RF/Microwave Diversity Switch with 8 terminals. It operates from -40 to 85 °C, with max freq of 4 GHz and min isolation of 34 dB. Ideal for applications requiring fast 0.0066 us switching time and low insertion loss of 1.25 dB.
UPG186TQ-E1
SPDT; Maximum Operating Frequency: 2150 MHz; Maximum Input Power (CW): 10 dBm; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Insertion Loss: 2.5 dB; Construction: COMPONENT;
HMC104
Analog Devices' HMC104 is a GAAS SPDT RF switch with -5V power supply, operating from -55°C to 125°C. It supports frequencies up to 6GHz and features absorptive port termination. Ideal for RF/microwave applications requiring high-frequency switching capabilities.
ADG901BRM-500RL7
ADG901BRM-500RL7 by Analog Devices is a CMOS RF/Microwave Diversity Switch with 8 terminals. It offers 1.25 dB max insertion loss, 31 dB min isolation, and operates from 0 to 2500 MHz. Ideal for applications requiring high-frequency signal routing in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved