Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Minimum Operating Frequency: 24000 MHz; Maximum Conversion Loss: 12 dB; Minimum Operating Temperature: -55 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$0.819
$0.762
IDEA Electronic Components Group
$0.881
$0.837
DigiPath Technology Company
$1.374
$1.319
Advanced Electronics
$3.232
$2.941
$2.650
AZTECH Wire
$7.524
Semicontronic
$17.000
$16.575
$16.490
Ampacity Inc.
$36.000
One Stop Electronics
$40.000
Component Stockers USA
$99.990
Corphita
RF/Microwave Mixers HMC-C015 attributes and parameters. Explore more RF/Microwave Mixers devices from Hittite Microwave
Additional Features:
Characteristic Impedance:
Construction:
Maximum Conversion Loss:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
HMC-C015 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LM358D-T
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
Central Semiconductor
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
Diotec Semiconductor Ag
Gulf Semiconductor
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
HMC338LC3BRTR
Analog Devices
Analog Devices' HMC338LC3BRTR is a GAAS RF/Microwave Mixer with 12 terminals, operating from -40 to 85°C. It requires a 4V power supply and draws a max current of 40mA. This ceramic-packaged mixer is ideal for surface mount applications in various RF systems.
ADL5356ACPZ-R2
ADL5356ACPZ-R2 by Analog Devices is a RF/Microwave Mixer with 36 terminals, operating at 1200-2500 MHz. It has BICMOS technology, double balanced design, and operates b/w -40 to 85 °C. Suitable for applications requiring high-frequency signal mixing in electronic systems.
HMC554A
Analog Devices' HMC554A is a RF/Microwave Mixer with 25 dBm CW input power, 10 dB conversion loss, and 50 ohm impedance. It operates from -40 to 85°C, covering frequencies from 10-20 GHz. Ideal for applications requiring double balanced mixers in high-frequency circuits.
MAX9995ETX-T
Maxim Integrated
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 36; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Package Equivalence Code: LCC36,.25SQ,20;
HMC399MS8
HMC399MS8 by Analog Devices is a RF/Microwave Mixer with 700-1000 MHz frequency range, 10 dB max conversion loss, and 25 dBm CW input power. It is a double balanced component suitable for various applications in the -40 to 85°C temperature range.
ADE-1L
Mini-circuits
ADE-1L by Mini-circuits is a RF/Microwave Mixer with max input power of 17 dBm, VSWR of 2.25, and conversion loss of 8 dB. Ideal for applications requiring double balanced mixers in the frequency range from 2 MHz to 500 MHz.
HMC220AMS8TR
Analog Devices' HMC220AMS8TR is a GAAS double balanced RF mixer with 8 terminals. It offers a max conversion loss of 10.5 dB and operates b/w -40 °C to 85°C. Ideal for RF/microwave applications, this surface mount device is housed in a plastic/epoxy package body.
AD8343ARU-REEL7
AD8343ARU-REEL7 by Analog Devices is a RF/Microwave Mixer with 14 terminals, operating from -40 to 85°C. It has a VSWR of 2, operates at frequencies up to 2500 MHz, and requires a 5V power supply. Ideal for applications requiring double balanced mixers in the RF/microwave domain.
SA612AN
Philips Semiconductors
RF/Microwave Mixers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Supply Current: 3 mA;
HMC528LC4RTR
Analog Devices' HMC528LC4RTR is a GAAS RF/Microwave Mixer with 24 terminals in a ceramic package. It operates b/w -40°C to 85°C, suitable for surface mount applications. Ideal for high-frequency signal processing in communication systems.
MAX9995ETX+TD
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 36; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Characteristic Impedance: 50 ohm;
M93C
Wj Communications
TRIPLE BALANCED; Maximum Conversion Loss: 11.5 dB; Maximum Operating Frequency: 18000 MHz; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 2000 MHz; Construction: MODULE;
AD831AP-REEL
AD831AP-REEL by Analog Devices is a RF/Microwave Mixer with 50 ohm impedance, operating from -40 to 85°C. It is a double balanced component suitable for applications requiring frequency range of 0-500 MHz.
RMS-30
The Mini-circuits RMS-30 is a ceramic RF mixer with 6 terminals, operating from 200 MHz to 3 GHz. It offers a low conversion loss of 9.8 dB and can handle up to 17 dBm input power. Ideal for RF/microwave applications requiring double balanced mixers in surface mount packages.
HMC1057
Analog Devices' HMC1057 is an RF/Microwave Mixer with 50 ohm impedance, 15 dB conversion loss, and 7.5 dBm CW input power. Ideal for image rejection applications in the frequency range of 71-86 GHz, operating from -55 to +85°C with gold terminal finish.
HMC412BMS8GETR
Analog Devices' HMC412BMS8GETR is a RF/Microwave Mixer with 24 dBm CW input power, -40 to 85 °C operating temp range, and 50 ohm impedance. Ideal for applications requiring triple balanced devices, it operates from 9-15 GHz with a low conversion loss of 9.4 dB.
UPC1685B
Renesas Electronics
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: CERAMIC; Maximum Operating Temperature: 125 Cel; Terminal Finish: Tin/Lead (Sn/Pb);
HMC316MS8
Analog Devices' HMC316MS8 is a GAAS RF/Microwave Mixer with 50 ohm impedance, 11 dB conversion loss, and 22 dBm CW input power. It operates from 1500 MHz to 3800 MHz, suitable for surface mount applications in various communication systems.
JMS-2LH+
JMS-2LH+ by Mini-circuits is a RF/Microwave Mixer with 6 terminals, operating from 20 MHz to 1000 MHz. It offers a max input power of 17 dBm and a low conversion loss of 9 dB, making it ideal for applications requiring high frequency signal mixing in components like amplifiers and transceivers.
LTC5541IUH#PBF
LTC5541IUH#PBF by Analog Devices is a RF/Microwave Mixer with 15 dBm CW input power, operating from -40 to 85 °C. It features double balanced construction, 50 ohm impedance, and operates b/w 1300-2300 MHz. Ideal for applications requiring high-frequency signal mixing in various RF systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Hittite Microwave
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved