Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: FLAT; Maximum Voltage Tolerance: 4 %; Width: 2.5 mm; Package Body Material: PLASTIC/EPOXY;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$190.840
100+ parts
1k+ parts
10k+ parts
$183.206
Northwest PG Solutions
$209.924
A-Z Elektronik GmbH
Alle Elektronik GmbH
Kepictronics
Fixed Regulators - Negative Single Output Standard HA179L05UA attributes and parameters. Explore more Fixed Regulators - Negative Single Output Standard devices from Hitachi
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
HA179L05UA Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Infineon Technologies
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
Shanghai Lunsure Electronic Technology
Diotec Semiconductor Ag
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
Semtech
L79L15ACZ-AP
L79L15ACZ-AP by STMicroelectronics is a fixed negative regulator with a nominal output of 15V and max current of 0.1A, ideal for stable voltage applications. It operates b/w 0 °C to 125 °C, ensuring reliability in various environments. With excellent line and load regulation, it’s perfect for sensitive electronic circuits.
L7920CD2T-TR
L7920CD2T-TR by STMicroelectronics is a fixed negative single output standard regulator with an output voltage of 20V and max current of 1.5A. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various applications requiring stable power supplies in compact spaces.
MC7908CD2TT4
MC7908CD2TT4 by Onsemi is a fixed negative single output standard regulator with 1A max output current. It has a nominal output voltage of 8V, operating temperature range from 0 to 125 °C, and package style in small outline. Ideal for applications requiring stable -8V power supply.
MC79L12ABPRM
MC79L12ABPRM by Onsemi is a fixed negative single output standard regulator with a nominal output voltage of 12V and max voltage tolerance of 5%. Operating temperature ranges from -40 to 125 °C, making it suitable for applications requiring stable power supply in various environments. Its through-hole terminal form and cylindrical package style offer ease of integration in electronic circuits.
5962-88746015X
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: QCCN; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 3 %; Package Style (Meter): CHIP CARRIER;
MC7912BT
MC7912BT by Onsemi is a fixed negative single output standard regulator with 12V nominal output voltage and 1A max output current. Operating temperature ranges from -40 to 125 °C, making it suitable for various applications requiring stable voltage regulation in harsh environments. Its through-hole terminal form and flange mount package style ensure easy installation and reliable performance.
L79L15ACUTR
L79L15ACUTR by STMicroelectronics is a fixed negative regulator with a nominal output of 15V and max current of 0.1A, ideal for precision applications. It operates b/w 0 °C to 125 °C, ensuring reliability in various environments. Its compact design features a rectangular shape and surface mount capability.
L7908ACD2T-TR
L7908ACD2T-TR by STMicroelectronics is a fixed negative single output standard regulator with an output voltage of 8V and max current of 1.5A. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various electronic applications requiring stable power supply. The package style is small outline, ideal for space-constrained designs.
MC79L24ACPRA
MC79L24ACPRA by Onsemi is a fixed negative single output standard regulator with 24V nominal output voltage. It operates in temperatures ranging from 0 to 125 °C, suitable for applications requiring a min input voltage of 27V and max of 38V. The package style is cylindrical with three terminals in a through-hole form factor.
L7922CD2T-TR
L7922CD2T-TR by STMicroelectronics is a fixed negative single output standard regulator with an output voltage of 22V and max current of 1.5A. It operates b/w 0 to 125 °C, making it suitable for various applications requiring stable power supplies in compact spaces. The package style is small outline, ideal for surface mount designs.
LM7912CT
National Semiconductor
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Peak Reflow Temperature (C): 260;
MC79L05ACLPRE3
Texas Instruments
MC79L05ACLPRE3 by Texas Instruments is a fixed negative single output standard regulator with 5V nominal output voltage and 0.1A max output current. It operates b/w 0-125°C, suitable for applications requiring stable power supply in various electronic devices. The package style is cylindrical with through-hole terminals, making it ideal for PCB integration.
UA79M24CKTP
UA79M24CKTP by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 24V and max load regulation of 0.3%. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply.
L7905CV1
L7905CV1 by STMicroelectronics is a fixed negative regulator with a nominal output of 5V and max current of 1.5A, ideal for powering sensitive electronics. It operates b/w 0 °C to 125°C, ensuring reliability in various environments. With excellent line/load regulation at just 0.1%, it’s perfect for stable voltage applications.
UA79M12MJG/883B
UA79M12MJG/883B by Texas Instruments is a MIL-STD-883 Class B fixed negative single output standard regulator with an operating temperature range of -55 to 150°C. It offers a nominal output voltage of 12V, max load regulation of 0.24%, and max output current of 0.5A. Ideal for applications requiring precise voltage regulation in harsh environments.
L79L08ABU
STMicroelectronics L79L08ABU is a fixed negative single output standard regulator with 8V nominal output voltage and 0.1A max output current. Operating temperature ranges from -40 to 125 °C, making it suitable for various applications requiring stable voltage regulation in compact designs.
L7924CD2T
L7924CD2T by STMicroelectronics is a fixed negative single output standard regulator with an output voltage of 24V and max current of 1.5A. It operates in a temperature range from 0 to 125 °C, making it suitable for various applications requiring stable power supply solutions. The package style is small outline, ideal for space-constrained designs.
UA79U05CKTP
UA79U05CKTP by Texas Instruments is a fixed negative single output standard regulator with a nominal output voltage of 5V and max voltage tolerance of 5%. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable power supply in electronic devices. This surface-mount regulator has a min input voltage of 7V and can handle up to 25V input, ideal for compact designs where space is limited.
L79L15ACD
STMicroelectronics L79L15ACD is a fixed negative single output standard regulator with an output voltage of 15V and max current of 0.1A. Operating temperature ranges from 0 to 125 °C, making it suitable for various electronic applications requiring stable power supply in compact designs.
L79L08ABZ-AP
L79L08ABZ-AP by STMicroelectronics is a fixed negative regulator with a nominal output of 8V and max current of 0.1A, ideal for stable power supply in various applications. It operates b/w -40 °C to 125 °C, ensuring reliability in harsh environments. With a compact cylindrical package and through-hole design, it’s perfect for space-constrained circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Hitachi
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved