Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RM15WTLP-12P(71) by Hirose Electric is a threaded circular connector with 12 contacts. It features silver contact finish, waterproof option, and brass/zinc alloy shell material. Ideal for cable mounting applications requiring a male plug connector with solid backshell design.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Ampacity Inc.
$1.500
Aztec Data Supply Inc.
$3.510
Corohmni
$3.602
Semicontronic
$5.500
$5.362
$5.335
AZTECH Wire
$11.552
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Bastille Electronics
Perfect Parts
Silver contact finish ensures a reliable and low-resistance connection.
Threaded coupling provides a secure and stable connection, ideal for applications where vibration may be present.
Chromium/nickel plated shell finish offers durability and corrosion resistance, ensuring long-term performance.
Multiple contact materials improve conductivity and provide versatility for various applications.
Ample number of contacts allows for multiple connections within a single connector.
Cable mounting type makes installation and maintenance easier, especially in applications where space is limited.
Waterproof feature ensures reliability in harsh environments or outdoor applications.
Brass/zinc alloy shell material provides a balance of durability and conductivity.
Other Function Circular Connectors RM15WTLP-12P(71) attributes and parameters. Explore more Other Function Circular Connectors devices from Hirose Electric
Backshell Type:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Shell Finish:
Shell Material:
Shell Size:
Termination Type:
Total No. of Contacts:
RM15WTLP-12P(71) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
PCN Obsolescence/ EOL - Multiple Devices 12/Mar/2018
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
E8WSDC12-32.768KTR
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
SLPPB50BSO0EH
Amphenol
The Amphenol SLPPB50BSO0EH is a circular connector with SNAP coupling, suitable for temperatures ranging from -40°C to 125°C. Featuring a solid backshell and crimp termination, it is designed for environment-resistant applications requiring a male plug with 1.142" body depth.
1300061700
Molex
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
HD10-9-1939P-B022
TE Connectivity
TE Connectivity's HD10-9-1939P-B022 circular connector features GLASS FILLED POLYAMIDE insulator, 250V rated voltage, and 1.66" x 1.75" x 1.625" dimensions. With UL certification and 13A signal current rating, it is ideal for applications requiring a polarized housing with solid backshell in panel mounting configurations.
RSC5/7
Lumberg Connect
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: RECEPTACLE; Reference Standard: CUL; UL; Body Diameter: .787 inch;
933176-100
Belden
Belden 933176-100 is a threaded circular connector with 5 contacts, DIN and IEC conformity. Featuring solid backshell, it's ideal for cable mounting applications requiring female contact gender and socket body style.
SLPPB35BSB4
Amphenol SLPPB35BSB4 is a circular connector with SNAP coupling, suitable for environments from -40°C to 125°C. Featuring a solid backshell and crimp termination, it is ideal for cable mounting applications requiring male contact gender.
LF07WBP-3S(31)
Hirose Electric
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED;
C01620D00310010
CIRCULAR CONNECTOR; Maximum Operating Temperature (Cel): 100; Minimum Operating Temperature: -40 Cel;
T3475001
The Amphenol T3475001 circular connector features a 10000000000 ohm insulation resistance, SILVER termination contact finish, and 1.752 inch body depth. Ideal for applications requiring a threaded coupling type, POLYETHYLENE insulator material, and operating temperatures ranging from -40 to 100 °C.
0942190007
Franz Binder &
0942190007 by Franz Binder & is a threaded circular connector with 7 contacts, made of polyamide. It features solid backshell and panel mounting, suitable for male contact termination. Ideal for applications requiring reliable and secure connections in various industries.
HDP26-24-31PE-L017
TE Connectivity's HDP26-24-31PE-L017 is a circular connector with 31 contacts, rated at 250V and 13A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized male plug with strain relief mounting on cables.
SRCN6A21-16S
Japan Aviation Electronics Industry
SRCN6A21-16S by Japan Aviation Electronics: Circular connector with 16 contacts, silver termination finish, and threaded coupling. Ideal for panel mounting applications in aerospace and industrial sectors.
1200940044
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
211771-1
TE Connectivity 211771-1 is a threaded circular connector with 19 contacts, rated at 600V. Made of glass-filled polyamide, it operates b/w -55 to 105°C. Ideal for applications requiring a polarized male receptacle with UL certification and solid backshell mounting on panels.
8-04AMMM-SL7A01
CIRCULAR CONNECTOR; Manufacturer Series: 8-04AMMM-SL7A;
801-007-16MT8-13PA
Glenair
The Glenair 801-007-16MT8-13PA is a threaded circular connector with body diameter of 0.75" and depth of 1.13". It features liquid crystal polymer insulator, nickel-PTFE shell finish, and aluminum alloy shell material. Ideal for applications requiring environment resistance, it has 13 contacts and operates b/w -65°C to 175°C.
SLPIRCBPSR1
The Amphenol SLPIRCBPSR1 is a threaded circular connector with a body depth of 1.889". It operates b/w -40°C to 125°C, meeting UL standards. Ideal for panel mounting applications requiring quick connect termination in male gender receptacles.
UTG0103SHVDE
Esterline Technologies
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; Shell Size: 10; Termination Type: CRIMP; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
PKG.M0.2SL.LB
Lemo Usa
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
C01620G00310012
Amphenol C01620G00310012 is a threaded circular connector with 4 contacts, rated at 16A signal current. Insulation resistance of 100MΩ and contact resistance of 5mΩ ensure reliable performance in temperatures ranging from -40 to 100°C. Ideal for commercial applications requiring durable connections with UL, VDE, and CSA compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RM15WTLP-12P(33)
RM15WTLP-12P(33) by Hirose Electric is a threaded circular connector with 12 contacts, made of brass shell and silver termination finish. It has a body diameter of 0.906" and insulator material of diallyl phthalate. Suitable for applications requiring a temperature range from -25°C to 85°C, such as industrial machinery and equipment.
RM15WTLP-12P(31)
Other Circular Connectors; Termination Contact Finish: Silver (Ag); JESD-609 Code: e4;
RM15WTPZ-12S(71)
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; Backshell Type: SOLID; Shell Size: 15; Body or Shell Style: PLUG;
RM15WTPZA-12S(71)
RM15WTPZA-12S(71) by Hirose Electric is a threaded circular connector with 12 silver contacts. Featuring waterproof design, it has a brass/zinc alloy shell and solid backshell for cable mounting. Ideal for applications requiring reliable female solder connections in harsh environments.
RM15QPS-10PH(71)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Insulation Resistance: 1000000000 ohm; Contact Resistance: 4 mohm;
RM15QPS-2SA(76)
RM15QPS-2SA(76) by Hirose Electric is a circular connector with body diameter of 0.906" and termination contact finish in silver. It features bayonet coupling type, suitable for cable mounting applications. With moisture resistance and operating temperature range from -25°C to 85°C, it is ideal for various industrial uses.
RM15QRD-10S(76)
RM15QRD-10S(76) by Hirose Electric is a circular connector with 10 contacts, bayonet coupling, and brass shell material. It has a body diameter of 0.787" and operates b/w -25°C to 85°C. Ideal for moisture-resistant applications requiring solder termination on cables or panels.
RM15QRD-4PA(76)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: SILVER; Body Diameter: .787 inch; Body or Shell Style: RECEPTACLE;
RM15WTPZ-12S(72)
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; IEC Conformity: NO; Contact Material: NOT SPECIFIED; MIL Conformity: NO;
RM15QPS-10S(71)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: STRAIGHT; No. of Ports: 1;
RM15TPD-10S(76)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Reference Standard: UL; Maximum Operating Temperature (Cel): 85; Empty Shell: NO;
RM15QRD-10S(71)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Shell Size: 15; Maximum Operating Temperature (Cel): 85;
RM15WTLP-10S(71)
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; DIN Conformance: NO; Total No. of Contacts: 10; MIL Conformity: NO;
RM15WTPZ-2P(72)
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; Termination Contact Finish: Gold (Au); Contact Material: NOT SPECIFIED; MIL Conformity: NO;
RM15WTPZA-3S(72)
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; Empty Shell: NO;
RM15WTRZ-3P(71)
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; IEC Conformity: NO; Backshell Type: SOLID; Shell Finish: CHROMIUM/NICKEL PLATED;
RM15WTRZ-4S(71)
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; Contact Material: BRASS/PHOSPHOR BRONZE/COPPER ALLOY; MIL Conformity: NO; Empty Shell: NO;
RM15WTRZB-2P(71)
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; IEC Conformity: NO; Total No. of Contacts: 2; Shell Material: BRASS/ZINC ALLOY;
RM15WTRZB-2P(72)
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; Total No. of Contacts: 2; Backshell Type: SOLID; MIL Conformity: NO;
RM15WTRZB-4S(71)
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; Mixed Contacts: NO; Termination Contact Finish: SILVER; Mounting Type: PANEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved