Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Hirose Electric FX8-60P-SV1(91) is a 60-contact, gold-finished stacking connector with 2 rows. It features a terminal pitch of 0.6mm and surface mount termination for board mounting applications. This male contact header is ideal for use in electronics requiring high-density connections with UL94V-0 flammability rating.
Median Price
$3.180
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$2.560
1k+ parts
$2.040
10k+ parts
$1.880
DigiKey
$2.371
$2.047
$1.828
Nova Conductors
$1.790
-
Vyrian
Prism Electronics
Continental Prestige Electronics
$1.754
Argo Parts USA
Netroflash
Ampacity Inc.
$2.170
AZTECH Wire
$9.451
Perfect Parts
The gold finish on the termination contacts ensures high conductivity and corrosion resistance, resulting in reliable and long-lasting connections.
Having two rows loaded allows for increased connectivity and versatility in the application of the product.
The board stacking connector type enables the stacking of multiple boards, making it ideal for applications requiring space-saving and efficient connections.
The 94V-0 UL flammability code indicates that the product is highly fire-resistant, providing a safe and reliable option for various environments.
Having 60 contacts allows for a high level of connectivity and compatibility with a wide range of devices or components.
The board mounting type ensures secure attachment to a circuit board, providing stability and reliability in the connection.
With a terminal pitch of 0.6mm, the product offers precise and compact connections, suitable for applications requiring fine pitch spacing.
The surface mount termination type allows for easy and efficient installation on a PCB, making it a convenient choice for SMT assembly processes.
The male contact gender ensures compatibility with corresponding female connectors, offering a standardized and reliable connection.
The straight mounting style simplifies the installation process and provides a clean and organized appearance in the application.
Headers & Edge Type Connectors FX8-60P-SV1(91) attributes and parameters. Explore more Headers & Edge Type Connectors devices from Hirose Electric
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
FX8-60P-SV1(91) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Production location addition 14/DEC/2023
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
1N4148WT-7
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
B6B-PH-SM4-TBT(LF)(SN)
J S T Mfg
B6B-PH-SM4-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 6 contacts, COPPER ALLOY material, and Tin (Sn) finish. It has a terminal pitch of 2mm and is used in applications requiring surface mount male connectors for edge type connections.
FTSH-105-01-F-DV-K-P-TR
Samtec
Samtec's FTSH-105-01-F-DV-K-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator and phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
746-010-520-606
Edac
Edac 746-010-520-606 is a 2-row card edge connector with 10 contacts. It has a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
VHR-2N-BL
BOARD CONNECTOR;
BM03B-SRSS-TB(LF)(SN)(P)
BM03B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 0.039" pitch, 0.197" body length, and 100000000 ohm insulation resistance. It operates b/w -25 to 85 °C, has a dielectric voltage of 500VAC, and features POLARIZED HOUSING for applications requiring high signal current in PCB mounting setups.
53261-0571
Molex
The Molex 53261-0571 is a board connector with a mating contact pitch of 0.049", insulation resistance of 100MΩ, and a max operating temperature of 105°C. It is commonly used in applications requiring surface mount termination and right angle mounting options.
5055960401
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1-1658622-1
TE Connectivity
TE Connectivity 1-1658622-1 is a dual-row board connector with 60 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.1", it uses polyethylene insulation and operates b/w -65 to 105°C. Ideal for ribbon cable applications, it offers durability up to 150 cycles and polarization key for secure connections.
929665-04-36-I
3m Electronic Products Division
929665-04-36-I by 3M Electronic Products Division is a board connector with 72 contacts, rated at 2.5A signal current. It features gold over nickel termination finish, glass-filled polyester insulator material, and operates b/w -40 to 105°C. Ideal for commercial applications requiring high insulation resistance and dielectric voltage withstand capabilities.
FTSH-105-01-L-DV-K-P-FR
The Samtec FTSH-105-01-L-DV-K-P-FR is a 2-row, 10-contact male board connector with tin finish. It has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications requiring straight mounting style.
17211101102
Harting Electronics & Kg
17211101102 by Harting Electronics & Kg is a board connector with 110 female contacts in a right-angle mounting style. It features a mating contact pitch of 0.079", body length of 1.965", and termination contact finish of gold over nickel. Ideal for applications requiring high-density PCB connections with precise rectangular patterns and press-fit terminations.
FTSH-110-01-L-DV-K
The Samtec FTSH-110-01-L-DV-K is a 2-row board connector with a mating contact pitch of 0.05 inches. It has a body length of 0.5 inches and can operate at temperatures ranging from -55 to 125°C. This connector is commonly used in commercial applications requiring reliable surface mount connections.
307-074-442-278
Edac 307-074-442-278 is a CARD EDGE CONNECTOR with 74 contacts, 0.156" pitch, and 5A signal rating. It has a dielectric voltage of 2545VAC, operates b/w -40 to 105°C, and features FEMALE contact gender for WIRE WRAP termination.
826631-4
TE Connectivity 826631-4 is a board connector with mating contact pitch of 0.1". It has insulation resistance of 5G ohm, operating temperature range from -65 to 105°C, and rated current of 5A. This male connector with right angle mounting is suitable for commercial applications requiring reliable signal transmission.
2-1761603-3
TE Connectivity 2-1761603-3 is a dual-row board connector with 10 contacts, rated at 1A. It features a contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
831-43-030-30-002000
Mill-max Mfg
831-43-030-30-002000 by Mill-max Mfg is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 2mm and is for SURFACE MOUNT applications. This FEMALE SOCKET connector mounts STRAIGHT on the board.
PAP-05V-S
PAP-05V-S by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.079" pitch, 3A signal current rating, and 800VAC dielectric voltage. Ideal for cable mounting applications, it features POLYAMIDE66 insulation material and operates b/w -25 to 85°C.
B2B-XH-A-GU
B2B-XH-A-GU by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and TIN finish. It has a terminal pitch of 2.5mm and is used for BOARD mounting applications requiring male connectors with solder termination.
XF2M-3015-1A-R100
Omron
Omron XF2M-3015-1A-R100 is a FFC/FPC connector with 30 contacts, rated at 0.5A signal current. It features gold (Au) - nickel (Ni) finish, 0.020" pitch, and liquid crystal polymer insulator. Suitable for board mounting applications with durability of 20 cycles and operating temperature range from -30 to 85°C.
22-11-2022
Molex 22-11-2022 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring polyamide insulation material, it offers 1000000000 ohm insulation resistance and operates b/w 0-75°C. With a matte tin over nickel termination finish, this male connector has a durability of 50 cycles and is ideal for commercial applications requiring a rated current of 4A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FX8-60P-SV
Hirose Electric
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: ONE;
FX8-60P-SV(21)
FX8-60P-SV(22)
FX8-60P-SV(71)
FX8-60P-SV(71) by Hirose Electric is a 60-contact male plug connector with gold termination finish. It features a mating contact pitch of 0.024", insulation resistance of 1Gohm, and dielectric voltage rating of 300VAC. Ideal for board stacking applications, this connector has a durability of 50 cycles and operates in temperatures ranging from -55 to 85°C.
FX8-60P-SV(91)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Filter Feature: NO; Total No. of Contacts: 60;
FX8-60P-SV(92)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Pitch (mm): .6;
FX8-60P-SV1
FX8-60P-SV1 by Hirose Electric is a board stacking connector with 60 contacts and a mating contact pitch of 0.024". It has a max operating temperature of 85°C and is suitable for commercial applications.
FX8-60P-SV1(21)
FX8-60P-SV1(22)
FX8-60P-SV1(71)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
FX8-60P-SV1(92)
FX8-60P-SV1(92) by Hirose Electric is a board stacking connector with a mating contact pitch of 0.024". It has an insulation resistance of 1000000000 ohm and can handle a rated current of 0.4 A. This connector is commonly used in commercial applications requiring reliable surface mount connections.
FX8-60S-SV
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: ONE;
FX8-60/60P11-SV1J(71)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Terminal Pitch (mm): .6; Mating Contact Finish: GOLD; Contact Material: PHOSPHOR BRONZE;
FX8-60/60P11-SVJ(71)
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Additional Features: LOW PROFILE; MIL Conformity: NO;
FX8-60/60P11-SV1J
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: TWO;
FX8-60/60P11-SVJ
FX8-60/60S11-SVJ
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: TWO;
FX8-60S-SV(21)
FX8-60S-SV(22)
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved