Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
M80-8892005 by Harwin PLC is a 20-contact board connector with 0.079" mating contact pitch, gold finish, and glass-filled polyester insulator. It operates b/w -55°C to 125°C, suitable for commercial applications requiring durable connectors with crimp termination and black insulator color. Ideal for cable mounting setups needing high reliability and UL certification.
Median Price
$13.110
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$12.580
100+ parts
$9.470
1k+ parts
$8.460
10k+ parts
-
DigiKey
$9.473
$8.053
TTI
$8.190
Newark
$14.630
$10.990
$10.400
Element14
$17.480
$13.400
$11.980
Powell Electronics
$19.650
$13.760
Master Electronics
$9.240
$7.840
Verical
$11.868
Nova Conductors
$7.741
TME
$11.480
$8.330
$7.800
Vyrian
NAC Semi
$11.600
$10.700
Quittner & Schimek s.r.o.
IBS Electronics
$12.959
$10.996
Legend Electronics Inc.
Aztec Data Supply Inc.
$1.060
Eastek
$6.970
Netroflash
$7.354
$7.199
Continental Prestige Electronics
$7.586
Corohmni
$10.015
Argo Parts USA
Perfect Parts
Abacus Technologies
Cyclops Electronics Ltd (Excess)
The small contact pitch allows for high-density connections, making this connector suitable for applications where space is limited.
The compact body length of the connector makes it versatile and easy to fit into various devices or systems.
With high insulation resistance, this connector ensures reliable and stable electrical connections, reducing the risk of shorts or malfunctions.
The gold and nickel finish on the termination contacts provides excellent conductivity and corrosion resistance, ensuring long-term performance.
The shallow body depth of the connector allows for easier installation and maintenance in tight spaces.
Having two rows loaded with contacts increases the connector's versatility and capacity for multiple connections.
This wide operating temperature range allows the connector to be used in extreme environments without performance degradation.
The round pin socket contact style ensures secure and reliable connections for optimal signal transmission.
With a high durability rating of 500 cycles, this connector is designed to withstand frequent mating and unmating processes, ensuring long-term reliability.
The locking mounting option provides added security and stability for the connector once installed, preventing accidental disconnections.
Headers & Edge Type Connectors M80-8892005 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Harwin PLC
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
Minimum Withdrawal Force (N):
M80-8892005 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Harwin is a world-leading specialist in reliable and high-performance technologies for demanding applications. Through innovation, advanced technologies, service and inspiration we help customers to realize competitive advantage by solving demanding connectivity challenges. Harwin aim to be the first-choice supplier of mission-critical and high-performance connectivity solutions. We keep investing in the latest computer aided design and engineering facilities to drive advancements and retain our position as the industry’s innovators. We also replace equipment on a five-year cycle.
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
Vishay Telefunken
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Vicor
Toshiba
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
324-91-164-41-002000
Mill-max Mfg
BOARD CONNECTOR; Termination Contact Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e0; Contact Material: BERYLLIUM COPPER;
BM05B-GHS-TBT(LF)(SN)(N)
J S T Mfg
BM05B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.049" pitch, POLYAMIDE insulator, and 500VAC dielectric voltage. Ideal for commercial applications, it features PHOSPHOR BRONZE contacts, TIN finish, and operates b/w -25 to 85 °C.
52465-1071
Molex
52465-1071 by Molex is a 2-row BOARD CONNECTOR with 0.031" pitch, 10 contacts, and 0.5A signal rating. It features LIQUID CRYSTAL POLYMER insulator, TIN finish, and 500VAC dielectric voltage. Ideal for commercial applications requiring STRAIGHT mounting and SURFACE MOUNT termination.
22-23-2051
The Molex 22-23-2051 is a board connector with 5 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1Gohm, and termination contact finish in matte tin over nickel. It is commonly used in commercial applications for PCB connections due to its rectangular contact pattern and solder termination type.
BM15B-SRSS-TB(LF)(SN)
BM15B-SRSS-TB(LF)(SN) by J S T Mfg is a 15-contact board connector with 0.039" pitch, suitable for PCB mounting. Featuring TIN finish, it has an insulation resistance of 100M ohm and operates b/w -25 to 85°C. Ideal for applications requiring male contacts, such as in electronics or telecommunications equipment.
SHR-06V-S-B
SHR-06V-S-B by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.039" pitch, suitable for cables with 0.015" min insulation diameter. With UL 94V-0 rating and 500VAC dielectric voltage, it's ideal for applications requiring high insulation resistance up to 100000000 ohm. The FEMALE connector has a rated current of 1A and operates b/w -25°C to +85°C temperature range.
MTSW-102-07-G-S-240
Samtec
Samtec's MTSW-102-07-G-S-240 is a board stacking connector with 0.1" pitch, gold-plated contacts, and glass-filled polyester insulator. Ideal for commercial applications, it features 2.54mm terminal pitch, solder termination, and male contact gender for reliable PCB connections.
1065
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Body Width: .3 inch; Contact Pattern: RECTANGULAR;
S3B-XH-A(LF)(SN)
S3B-XH-A(LF)(SN) by J S T Mfg is a 3-contact board connector with brass contacts and tin copper finish. It has a terminal pitch of 2.5mm, UL 94V-0 flammability rating, and right-angle mounting style. Ideal for applications requiring secure board-to-board connections in electronic devices.
DF40C-100DS-0.4V
Hirose Electric
DF40C-100DS-0.4V by Hirose Electric is a 2-row stacking connector with 100 contacts, gold termination, and liquid crystal polymer insulator. It has a mating contact pitch of 0.016", dielectric voltage of 100VAC, and operates b/w -35 to 85°C. Ideal for board applications requiring durability, reliability, and signal current rating of 0.3A.
B4B-XH-A
B4B-XH-A by J S T Mfg is a BOARD CONNECTOR with 4 contacts, featuring Tin (Sn) over Copper (Cu) finish. It has a terminal pitch of 2.5mm and is designed for straight board mounting applications. The connector's UL Flammability Code is 94V-0, making it suitable for various electronic devices requiring reliable male contact connections.
B02B-PASK(LF)(SN)
B02B-PASK(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" mating contact pitch, 800VAC dielectric voltage, and 3A signal current rating. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and is suitable for board mounting applications requiring high insulation resistance and reliable signal transmission.
851-43-045-10-011000
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
ZHR-5
ZHR-5 by J S T Mfg is a BOARD CONNECTOR with 5 contacts, UL 94V-0 rated. It features FEMALE contacts for CABLE mounting with CRIMP termination. Ideal for applications requiring reliable edge type connectors in RECEPTACLE style.
DTM04-3P-E003
TE Connectivity
TE Connectivity's DTM04-3P-E003 is a 1.68"x.816"x.638" board connector with GLASS FILLED POLYAMIDE insulator, UL 94V-0 rated for 250V/7.5A signal current at -55 to 125°C. Ideal for cable mounting applications requiring polarized male contacts and strain relief option.
53047-0610
The Molex 53047-0610 is a 6-contact, polarized housing board connector with a mating contact pitch of 0.049 inches. It has a body length of 0.364 inch and is made of polyamide. This connector is commonly used in commercial applications and can withstand temperatures ranging from -40 to 85°C.
52030-0829
The Molex 52030-0829 FFC/FPC connector has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 500VAC. It is used in applications requiring a durable, straight-mounting female connector with staggered PCB contact pattern for commercial reliability.
833-87-054-30-001101
Preci-dip Sa
833-87-054-30-001101 by Preci-dip Sa is a 54-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Featuring Beryllium Copper contacts with AU finish, it offers high durability of 500 cycles and insulation resistance of 10 Gohm. Ideal for applications requiring a mating contact pitch of 0.079", such as commercial electronics systems.
DT04-2P-E008
TE Connectivity's DT04-2P-E008 is a 2.251" x 0.675" x 0.67" board connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a male contact gender with strain relief option.
103948-9
TE Connectivity 103948-9 is a board connector with 10 contacts, 0.1" pitch, and 3A signal rating. It features POLYETHYLENE insulation, tin/lead finish, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male connectors with latching mounting options.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M80-8262042
Harwin PLC
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Length: .927 inch;
M80-8530842
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Style: RND PIN-SKT;
M80-8530642
The Harwin PLC M80-8530642 is a 6-contact male plug board connector with 0.079" mating contact pitch and 3A signal current rating. Featuring POLYAMIDE insulation, it operates b/w -55 to 125°C, suitable for commercial applications requiring durable connections in PCBs with rectangular contact patterns.
M80-8881005
M80-8881005 by Harwin PLC is a 10-contact, 2-row loaded board connector with a mating contact pitch of 0.079 inches. It has a durable design with a body length of 0.518 inch and can withstand temperatures ranging from -55 to 125°C. This connector is commonly used in commercial applications requiring reliable and secure connections.
M80-8820442
M80-8820442 by Harwin PLC is a board connector with 0.079" mating contact pitch, suitable for commercial applications. It features a 3A rated current, 100M ohm insulation resistance, and operates b/w -55°C to 125°C. With a durable design lasting up to 500 cycles, this connector is ideal for use in various electronic devices requiring reliable connections.
M80-8531042
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Reference Standard: UL;
M80-8880405
The Harwin PLC M80-8880405 is a 4-contact board connector with gold finish, suitable for cables. With a mating contact pitch of 0.079", it has an insulation resistance of 1Gohm and operates b/w -55 to 125°C. Ideal for commercial applications, it offers durability up to 500 cycles.
M80-8891405
M80-8891405 by Harwin PLC is a 14-contact board connector with gold termination finish. Featuring glass-filled polyester insulation, it has a mating contact pitch of 0.079" and operates b/w -55°C to 125°C. Ideal for cable mounting applications, this durable connector offers high reliability and is suitable for commercial use.
M80-8510842
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
M80-8880605
M80-8880605 by Harwin Plc is a board connector with a mating contact pitch of 0.079 inches. It has a body length of 0.36 inch and insulation resistance of 1000000000 ohm. This connector is commonly used in cable mounting applications and has a durability of 500 cycles.
M80-8512042
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO;
M80-8990205
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Plating Thickness (inch): 12u;
M80-8531442
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.079;
M80-8881605
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Insertion Force (N): 2.78;
M80-8980305
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mixed Contacts: NO;
M80-8510442
M80-8510442 by Harwin PLC is a 4-contact board connector with 0.079" mating contact pitch and 3A signal current rating. Featuring a black polyamide insulator, it operates b/w -55°C to 125°C, ideal for commercial applications requiring durable connections in PCBs with right-angle mounting.
M80-8511042
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Resistance: 25 mohm;
M80-8501045
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Additional Features: POLARISED;
M80-8880805
M80-8880805 by Harwin PLC is a 2-row board connector with 8 contacts. Featuring gold termination finish, it offers high durability with 500 cycles and insulation resistance of 1G ohm. Ideal for cable mounting applications, this socket connector has a mating contact pitch of 0.079" and operates b/w -55°C to 125°C.
M80-8892001
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Pattern: RECTANGULAR; Insulation Resistance: 1000000000 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved