Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: CHASSIS MOUNT; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Operating Voltage: 640 V; Maximum Circuit DC Voltage: 640 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Non-linear Resistors V481CA60PS attributes and parameters. Explore more Non-linear Resistors devices from Harris Semiconductor
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Rated Power Dissipation (P):
Resistor Type:
Sub-Category:
Terminal Placement:
Terminal Shape:
Operating Voltage:
V481CA60PS Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
MBR0520LT1
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
LVR075S-240
TE Connectivity
TE Connectivity's LVR075S-240 is a PTC resettable fuse with resistance of 0.316 ohm and max circuit voltage of 240V. Ideal for temperature sensing applications, it operates b/w -40 to 85°C. Featuring radial terminal placement, it is CSA, TUV, and UL certified.
RXEF375K
TE Connectivity's RXEF375K is a PTC resettable fuse with 72V URac. It features radial terminal placement, disk package shape, and -40 to 85°C operating temperature range. Ideal for temperature sensing applications, it has 2 terminals and wire-shaped terminals for through-hole mounting in bulk packaging.
ASMD150F/33-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .068 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Reference Standard: AEC-Q200; TS 16949;
16R400GPR
16R400GPR by Littelfuse is a PTC resettable fuse with a resistance of 0.021 ohm and an operating voltage of 16V. It is used for overcurrent protection in applications such as through hole mounting.
RUEF250U
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .02 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Package Style (Meter): Radial;
ERTJ1VV154J
Panasonic
Panasonic ERTJ1VV154J is a NTC thermistor with 150000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4750 K and operating temperatures ranging from -40 to 125 °C. The dual-ended rectangular package with SMT style and wraparound terminals make it suitable for surface mount installations.
1210L005WR
1210L005WR by Littelfuse is a PTC resettable fuse with resistance of 3.6 ohm and operating voltage of 30V. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. With a temperature range from -40 to 85°C, it meets CUL, TUV, and UL standards for various applications.
GA10K3MBD1
TE Connectivity's GA10K3MBD1 is a non-linear resistor with 2 terminals, operating b/w -40°C to 125°C. With a lead length of 56mm, it is ideal for temperature sensing applications.
MF-MSMF030-2
Bourns
The Bourns MF-MSMF030-2 is a PTC resettable fuse with resistance of 0.3 ohm, operating voltage of 30V, and dual-ended terminal placement. Ideal for overcurrent protection in various applications, it features SMT package style, gold over nickel terminal finish, and AEC-Q200 reference standard compliance.
RKEF250
TE Connectivity's RKEF250 is a PTC resettable fuse with 2.8W power dissipation, rated for 60V AC voltage. Ideal for temperature sensing applications, it features radial terminal placement and tin finish, operating b/w -40°C to 85°C.
USP12837
Littelfuse USP12837 is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3892 K. Ideal for temperature sensing applications, it has radial terminal placement and operates b/w -55°C to 125°C. Package style is chassis mount with flexible wire terminals.
1206L200PR
1206L200PR by Littelfuse is a PTC resettable fuse with resistance of 0.018 ohm, operating voltage of 6V, and max temp of 85°C. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style.
NCP15WF104F03RC
Murata Manufacturing
Murata Manufacturing's NCP15WF104F03RC is a Non-linear Resistor with 100000 ohm resistance, 1% tolerance, and 5V operating voltage. It is used for TEMPERATURE SENSING applications due to its high thermal sensitivity index of 4250 K and wide temperature range from -40°C to 125°C. The thermistor features dual-ended terminals in a surface mount package style for easy installation.
B72214-S250-K101
TDK
The TDK B72214-S250-K101 is a VARISTOR with 25V max circuit RMS voltage and 7J energy absorption. It has radial terminals, operates b/w -40 to 85 °C, and is ideal for surge protection in electronic circuits.
RF1344-000
PTC RESETTABLE FUSE; Terminal Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3;
RUEF250S
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .07 ohm; Rated Power Dissipation (P): 1.2 W; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL;
RUEF250
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .07 ohm; Rated Power Dissipation (P): 1.2 W; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
NTCS0402E3103FLT
Vishay Intertechnology
Vishay Intertechnology's NTCS0402E3103FLT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3490 K. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular package for surface mounting.
RXEF185-1
TE Connectivity's RXEF185-1 is a PTC resettable fuse with resistance of 0.19 ohm and rated power dissipation of 2.1W. Ideal for temperature sensing applications, it features radial terminal placement and disk package shape, suitable for through hole mounting.
V275LA20APW
V275LA20APW by Littelfuse is a VARISTOR with 275V max circuit RMS voltage, 75J energy capacity, and -55 to 125 °C operating temp. Ideal for surge protection in various applications due to its METAL OXIDE technology and THROUGH HOLE MOUNT design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Harris Semiconductor
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved