Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SAMPLE AND HOLD CIRCUIT; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
$35.540
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
< 1k
Rochester
1+ parts
-
100+ parts
1k+ parts
$31.800
10k+ parts
$29.930
DigiKey
Nova Conductors
$36.530
Freelance Electronics
$46.384
$48.704
$45.920
Holdelec - ElecDif-Pro
ACDS - Activité Composants Distribution Service
DigiKey Marketplace
Vyrian
Manoshevitz Elec. Sales
Electronic Expediters
North Shore Components
NexGen Digital
AZTECH Wire
$9.821
Continental Prestige Electronics
$35.799
Bastille Electronics
$34.704
$32.512
Component Stockers USA
$40.040
Supply Digital
Argo Parts USA
A-Z Elektronik GmbH
Infinite Electronics LLP (Excess)
Sample & Hold ICs HA1-5320/883 attributes and parameters. Explore more Sample & Hold ICs devices from Harris Semiconductor
Amplifier Type:
Power Supply Voltage Ratings:
Total Functions:
Sub-Category:
Sampling Mode:
Nominal Acquisition Time:
Maximum Acquisition Time:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Maximum Supply Current:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Maximum Droop Rate:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Temperature Grade:
Qualified:
Screening Level:
JESD-30 Code:
JESD-609 Code:
Package Code:
Package Shape:
Package Style (Meter):
Package Equivalence Code:
HA1-5320/883 Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Semitron
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Taitron Components
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Surge Components
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
HA3-2425-5
Harris Semiconductor
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
LF398N8
Analog Devices
LF398N8 by Analog Devices is a Sample & Hold IC with 8 terminals, operating at 15V nominal voltage. It features a max analog input voltage of 11.5V and an acquisition time of 16us. This bipolar technology amplifier is commonly used in sample and hold circuits for commercial applications.
SMP-81FY
Analog Devices' SMP-81FY is a ceramic, glass-sealed Sample & Hold IC with 14 terminals. It operates at -25 to 85 °C and has a max droop rate of 4 V/s. Ideal for sample-and-hold circuits, it features a nominal voltage of 15V and max analog input voltage of ±11.5V.
MAX5168LECM-T
Analog Devices' MAX5168LECM-T is a Sample & Hold IC with 48 terminals, BICMOS technology, and 10V nominal voltage. It operates in industrial temperature range (-40 to 85 °C) with a max acquisition time of 4us. Ideal for applications requiring fast and precise analog signal sampling.
SHA-4
The Analog Devices SHA-4 is a Sample & Hold IC with 14 terminals, operating at temperatures from 0 to 70 °C. It has a max droop rate of 0.01 V/s and requires a nominal voltage of ±15V. This amplifier type circuit is commonly used in commercial applications for sample-and-hold functions.
DS1843D+
Maxim Integrated
SAMPLE AND HOLD CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: SON; Package Shape: RECTANGULAR;
AD585JPZ-REEL7
AD585JPZ-REEL7 by Analog Devices is a Sample & Hold IC in PLASTIC/EPOXY package with 20 terminals. It operates at 0-70 °C, with Vsup of ±15V and max acquisition time of 5µs. Ideal for sample-and-hold circuits in commercial applications due to its fast droop rate and low supply current.
8001601CA
Defense Logistics Agency
AD585-713Q
AD585-713Q by Analog Devices is a Sample & Hold IC with 14 terminals, ceramic package, and rectangular shape. It operates at -55 to 125 °C with a max acquisition time of 3 us. Ideal for military applications requiring fast sample-and-hold circuit performance within a compact IN-LINE package.
MAX5167MECM
SAMPLE AND HOLD CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
HTC-0300A
Analog Devices' HTC-0300A is a Sample & Hold IC with 24 terminals, featuring a max droop rate of 5 V/s and nominal voltage of 15V. Ideal for applications requiring fast acquisition times and precise analog input voltage tracking in hybrid technology circuits.
AD684AQ
AD684AQ by Analog Devices is a Sample & Hold IC with 4 functions, BICMOS technology, and 1 us acquisition time. It operates at -40 to 85 °C and has a max supply voltage of +-15 V. Ideal for industrial applications requiring precise analog signal sampling and holding capabilities.
HA1-5320-2
Rochester Electronics
SAMPLE AND HOLD CIRCUIT; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Shape: RECTANGULAR; No. of Functions: 1;
AD9100JD
AD9100JD by Analog Devices is a Sample & Hold IC with 20 terminals, operating at 5V supply voltage. It features a max droop rate of 6000 V/s and can handle analog input voltages up to ±5V. Ideal for applications requiring high-speed sample-and-hold circuits in commercial temperature environments.
5962-01-201-2461
Analog Devices' 5962-01-201-2461 is a MILITARY-grade Sample & Hold IC with 24 terminals, operating from -55 to 125 °C. It features HYBRID technology, IN-LINE package style, and +-15V power supplies. Ideal for applications requiring precise signal sampling and holding in harsh environments.
LF398H/NOPB
LF398H/NOPB by Texas Instruments is a Sample & Hold IC with 8 terminals, operating at +-15V supplies. It features a max acquisition time of 25us and can handle analog input voltages up to 11.5V. Ideal for commercial applications requiring a fast sample-and-hold circuit in temperatures ranging from 0 to 70°C.
HA1-5330-5
Intersil
MAX5168NECM+
MAX5165NECM+
SMP11BY
Analog Devices' SMP11BY is a Sample & Hold IC with 14 terminals, ceramic package, and rectangular shape. It operates at -55 to 125 °C with supply voltage of +-15V. Ideal for military-grade applications due to its bipolar technology and fast acquisition time of 5 us.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HA1-5320/883
Renesas Electronics
SAMPLE AND HOLD CIRCUIT; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Shape: RECTANGULAR; JESD-609 Code: e0;
HA1-5320-2 by Renesas Electronics is a Sample & Hold IC with 16 terminals, MILITARY grade, and 1.5 us acquisition time. It has a max droop rate of 100 V/s and operates b/w -55 to 125 °C. Ideal for applications requiring fast sampling and holding of analog signals in military-grade environments.
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Shape: RECTANGULAR; Maximum Acquisition Time: .9 us;
HA1-5320-2X96
SAMPLE AND HOLD CIRCUIT;
HA1-5320-8
HA1-5320-7
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Shape: RECTANGULAR; JESD-30 Code: R-GDIP-T14;
HA1-5320-5
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Shape: RECTANGULAR; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved