Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Supply Digital
1+ parts
100+ parts
1k+ parts
10k+ parts
Multiplexers & Switches CD74HC4067EX attributes and parameters. Explore more Multiplexers & Switches devices from Harris Semiconductor
Other IC type:
JESD-30 Code:
JESD-609 Code:
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Signal Current:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
CD74HC4067EX Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
350766-1
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Electronic Devices
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Frontier Electronics
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
Won-top Electronics
TPS2064CDGNR-2
TPS2064CDGNR-2 by Texas Instruments is a small outline switch with separate output, operating from -40 to 125°C. It features SPST type, GULL WING terminals, and MAKE-BEFORE-BREAK switching suitable for industrial applications requiring low supply current.
MUX36S16IRSNR
MUX36S16IRSNR by Texas Instruments is a CMOS single-ended multiplexer with 32 terminals, operating at -40 to 125 °C. It features a max on-state resistance of 430 ohm, switching time of 151 ns, and bandwidth of 500 kHz. Ideal for automotive applications due to its compact chip carrier package and low supply current of 0.062 mA.
PCA9548APW,118
NXP Semiconductors' PCA9548APW,118 is an 8-channel multiplexer with a supply voltage range of 2.3V to 5.5V and on-state resistance of 55 ohm. It operates b/w -40°C to 85°C, has separate outputs, and a max seated height of 1.1mm. Ideal for applications requiring signal routing in compact spaces due to its small outline package style.
MAX4634EUB-T
Maxim Integrated
MAX4634EUB-T by Maxim Integrated is a CMOS single-ended multiplexer with 4 channels. It operates at a supply voltage range of 1.8V to 5.5V, featuring a max on-state resistance of 7 ohm and off-state isolation of 80 dB. This industrial-grade switch has a compact thin profile package suitable for various applications requiring precise signal routing in tight spaces.
74HC4067BQ,118
74HC4067BQ,118 by NXP Semiconductors is a CMOS single-ended multiplexer with 16 channels. It operates at a supply voltage range of 2-10V and offers a max on-state resistance of 130 ohm. With a compact chip carrier package style, it is ideal for automotive applications requiring fast switching times and high isolation levels.
NC7SB3157P6X-F40
Fairchild Semiconductor
Multiplexers or Switches; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
PCA9546APW,118
PCA9546APW,118 by NXP Semiconductors is a 4-channel multiplexer with a supply voltage range of 2.3V to 5.5V and on-state resistance of 55 ohm. It operates in industrial temperature grades (-40°C to 85°C) and has separate outputs with a max switch-on/off time of 0.3 ns, making it ideal for applications requiring precise signal routing in compact spaces.
CD74HCT4067MG4
CD74HCT4067MG4 by Texas Instruments is a 24-terminal CMOS multiplexer with a 5V supply voltage. It features a max on-state resistance of 270 ohm and operates in temperatures ranging from -55 to 125°C. Ideal for military-grade applications requiring high-speed signal switching with low power consumption.
DG508ACJ
Siliconix
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD4051BPWRE4
Rochester Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4051BM
Intersil
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LV4052APWR
SN74LV4052APWR by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at a supply voltage range of 2V to 5.5V and offers a max on-state resistance of 225 ohm. With a nominal bandwidth of 50 kHz, it is ideal for industrial applications requiring high-speed signal switching in compact designs.
DG442DY
Vishay Intertechnology's DG442DY is a CMOS SPST multiplexer with 4 functions, -40 to 85°C operating temp, and 15V supply voltage. With a small outline package style, it suits industrial applications requiring separate output and break-before-make switching.
HEF4051BT
HEF4051BT by NXP Semiconductors is a single-ended multiplexer with 8 channels. It operates at a nominal voltage of 5V and has a max on-state resistance of 2500 ohm. This CMOS technology-based device is commonly used in automotive applications due to its small outline package and wide temperature range (-40°C to 125°C).
ADG438FBRZ
Analog Devices
ADG438FBRZ by Analog Devices is a CMOS single-ended multiplexer with 8 channels, -15V to +15V power supplies, and 270 ohm max on-state resistance. It is ideal for automotive applications due to its small outline package, dual terminal position, and high off-state isolation of 93 dB.
ADG1412YRUZ-REEL7
ADG1412YRUZ-REEL7 by Analog Devices is a 4-function SPST multiplexer with 16 terminals. It operates at -40 to 125 °C, with a max seated height of 1.2 mm and on-state resistance of 5.4 ohm. Ideal for automotive applications requiring CMOS technology and high isolation levels.
ADG619BRTZ-REEL7
ADG619BRTZ-REEL7 by Analog Devices is an 8-terminal SPDT CMOS switch with a max on-state resistance of 6.5 ohm and common output. It operates at industrial temperature grades from -40 to 85 °C, making it suitable for applications requiring low-profile switches with high isolation levels.
ADP1190ACBZ-R7
SPST; Terminal Finish: TIN SILVER COPPER; JESD-609 Code: e1; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
MAX4567EEE
MAX4567EEE by Maxim Integrated is a 16-terminal CMOS multiplexer with 2 functions. Operating at -40 to 85°C, it has a max on-state resistance of 60 ohm and switching voltage of ±5V. Ideal for audio/video switches, this IC offers industrial-grade performance in a small outline package.
ADG619BRMZ-REEL7
ADG619BRMZ-REEL7 by Analog Devices is a CMOS SPDT switch with 8 terminals, operating at -40 to 85°C. It has a max on-state resistance of 6.5 ohm and switching time of 120 ns. Ideal for industrial applications requiring common output signal switching in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Harris Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved