Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; VDE; Rating (Primary): SINGLE 230V; Length: 50.7 mm; Packing Method: BULK;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Power & Mains Transformers BVEI4811312 attributes and parameters. Explore more Power & Mains Transformers devices from Hahn And Kg
Approvals (V):
Center Tap Feature-1:
Height:
Nominal Input Voltage (V):
Length:
Mounting Feature:
No. of Winding (Secondary):
Maximum Operating Temperature:
Output Current-1:
Output Voltage-1:
Packing Method:
Rating (Primary):
Transformer Type:
Volt-Ampere Rating (VA):
Width:
BVEI4811312 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.31.40.35
SB
HAHN QUALITY - Performance that inspires confidence. This guiding principle has been a common thread through our entire corporate concept since the company was founded. Right from the start, HAHN relies on the highest product quality and willingness to provide services in the interest of our customers. The expansion is dynamic and solid, we continuously invest in expansion and new developments. Today, several hundred employees work for international customers from many industries. Our goal is to continue to make a contribution to the market success of our customers through quality and customer-friendly service. In addition to our large selection of series components, we also develop your individual componentsand offer you the service of our cooperation for the required ENEC or UL component approvals. We would be happy to support you with our technicians at your site with the design-in and the layout of the components.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
1552200253
Molex
WIRE AND CABLE;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Good-ark Electronics
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
FD7-36
Triad Magnetics
The Triad Magnetics FD7-36 transformer is a 56 VA power transformer with dual 115V primary rating and 36V output voltage. It features an isolation voltage of 2500 V, center tap functionality, and UL approval. Ideal for power applications, this split bobbin transformer has dimensions of L68.25xB46.02xH57.15 mm and can be chassis mounted.
F-45X
Magnetek
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Approvals (V): UL; Width: 57.15 mm; Volt-Ampere Rating (VA): 24 VA; Center Tap Feature-2: NO;
1061
Amecon
TOROIDAL POWER TRANSFORMER; No. of Winding (Secondary): 1; Output Current-1: 2.78 A; Volt-Ampere Rating (VA): 25 VA; Nominal Operating Frequency: 60 HZ;
10-4
Bel Fuse
Bel Fuse's 10-4 Power Transformer has a Center Tap Feature, Isolation Voltage of 1500V, and Output Current of 4A. With dimensions L90.5xB60.3xH77.7 (mm), it is ideal for chassis mount applications requiring dual winding and 5V output at a nominal frequency of 50/60Hz.
1193
TOROIDAL POWER TRANSFORMER; Volt-Ampere Rating (VA): 150 VA; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1; Output Current-1: 2.68 A;
45018
Myrra Sas
45018 by Myrra Sas is a Power Transformer with dual 115V primary rating and 24V output voltage. It features CSA, UL, VDE approvals and isolation voltage of 4000V. With a VA rating of 3VA, it is ideal for applications requiring reliable power conversion in compact spaces.
16-1
Bel Fuse's 16-1 Power Transformer features dual 1A output currents, 8V output voltages, and a center tap design with isolation voltage of 1500V. Ideal for chassis mounting applications, this transformer is compact at 73mm x 50.8mm x 58.7mm, making it suitable for various power supply needs in electronics.
74942300
Wuerth Elektronik & Kg
74942300 by Wurth Elektronik is a Power Transformer with 2 secondary windings, Center Tap Feature-1 & -2, and AEC-Q200 approval. It offers an Isolation Voltage of 4300V, operates b/w -40°C to 125°C, and has a Nominal Input Voltage of 1000V. Ideal for surface mount applications requiring compact dimensions (15.1mm x 14.2mm x 4.75mm).
1088
TOROIDAL POWER TRANSFORMER; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 30 VA; Output Current-1: 1.25 A;
F-46X
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Approvals (V): UL; Nominal Operating Frequency: 50/60 HZ; Application: POWER; No. of Winding (Secondary): 1;
VPP10-1000
POWER TRANSFORMER; Approvals (V): UL; CSA; TUV/VDE; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 10 VA; Additional Features: PCB MOUNTABLE; No. of Winding (Secondary): 1;
76904
Pico Electronics
Pico Electronics 76904 power transformer with VA rating of 2.4VA, output voltage of 8V, and center tap feature is ideal for military applications due to MIL-PRF-27 approval. It has a single primary winding at 26V and operates at a frequency of 400Hz in compact dimensions of L17.02xB13.97xH10.54 mm for surface mount installation.
68-2
Signal Transformer
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: 68; Nominal Operating Frequency: 50/60 HZ; Rating (Primary): SINGLE 115V; Center Tap Feature-2: YES;
1046
TOROIDAL POWER TRANSFORMER; Volt-Ampere Rating (VA): 15 VA; Output Current-1: .54 A; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ;
VPS28-900
Triad Magnetics VPS28-900 is a 25 VA power transformer with dual 115V primary rating. It offers 4000V isolation voltage, 1.8A output current, and 14V output voltage for POWER applications. This split bobbin transformer has CE, CSA, CUL, TUV, UL approvals and dimensions of L71.42xB49.2xH58.72 mm for chassis mounting.
1050
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: 10; Output Voltage-2: 5 V; Nominal Operating Frequency: 50/60 HZ; Rating (Primary): SINGLE 105/115/125V;
1049
TOROIDAL POWER TRANSFORMER; Output Current-1: .5 A; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 15 VA; Nominal Operating Frequency: 60 HZ;
36-50
Bel Fuse's 36-50 is a power transformer with a center tap feature and an isolation voltage of 1500 V. It has an output current of 50 A and dimensions of 162mm X 184.2mm X 134.9mm. This transformer is suitable for chassis mount applications requiring dual 115V rating and operates at a nominal frequency of 50/60 HZ.
1S1F
Schneider Electric Sa
1S1F by Schneider Electric Sa is a Power Transformer with dual 240V primary rating and 1000 VA Volt-Ampere. It has two secondary windings, each providing 120V output voltage. Ideal for chassis mounting applications, this transformer operates at a nominal frequency of 60 HZ.
712A
Hammond Manufacturing
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Approvals (V): CSA; Rating (Primary): SINGLE 117/234V; Volt-Ampere Rating (VA): 293 VA; Center Tap Feature-2: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Hahn And Kg
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved