Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; Assembly Item Name: RING ITEM; MIL Conformity: NO; Maximum Cable Entry: .38 inch; Material: COMPOSITE; DIN Conformity: NO;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Air Electro
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Nova Conductors
Flame Enterprises
Ampacity Inc.
$0.500
Argo Parts USA
Aranea Global
Continental Prestige Electronics
Assembly Products 687-749XB06 attributes and parameters. Explore more Assembly Products devices from Glenair
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Glenair manufactures high-reliability connectors and cables for mission-critical land, sea, air, and space applications. The company began operations in 1956 producing electrical connector backshells and accessories. Building on that foundation, we now offer dozens of full-spectrum connector product lines designed to meet every electrical and optical interconnect requirement, including a broad range of military qualified and signature connector designs such as the MIL-DTL-38999 Series III and our micro miniature Series 80 Mighty Mouse. Glenair is a privately-held company whose strengths include ISO 9001 process quality, full-spectrum product lines, fast "turnaround" on quotes and custom orders, unsurpassed sales and technical support in every major market in the world, and the industry's largest standing inventory of commercial and Mil-Spec electrical and optical connector components.
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
General Semiconductor
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS06-32.768KHZ-T
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
EU2B-YS3203C
Idec
ROTARY SWITCH;
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
LM358D-T
Philips Semiconductors
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
43030-0002
Molex
Molex 43030-0002 contact features crimp terminal type, 15 finish thickness, and 105 °C max operating temp. Ideal for use with 43025/43645/44133 applications requiring female chain contact design.
0462-203-04141
TE Connectivity
TE Connectivity's 0462-203-04141 is a female crimp contact with machined design for power applications. It has a rated current of 100A, suitable for wire gauge up to 6 AWG. With operating temperatures ranging from -55°C to 125°C, it is ideal for straight mounting in assembly products.
1SNK708911R0000
Abb
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel; Insulator Material: POLYAMIDE;
TXR76AU00-1206AI
CONNECTOR ACCESSORY;
1-968849-1
TE Connectivity's 1-968849-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 15A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.051 to 0.083 inch.
C01600U00001012
Amphenol
CONNECTOR ACCESSORY; Manufacturer Series: C016;
WM-2SA
CONNECTOR ACCESSORY; Design: POWER AND SIGNAL; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Material: POLYBUTYLENE TEREPHTHALATE; Wire Gauge (AWG): 0;
08-56-0110
Molex 08-56-0110 CONTACT features CRIMP terminals for 30-22 AWG wires. Made of BRASS, it has a 0.186" length and 0.062" cable entry. Ideal for STRAIGHT mounting in Assembly Products applications.
SSHL-002T-P0.2
J S T Mfg
SSHL-002T-P0.2 by J S T Mfg is a CRIMP terminal with UL approval, rated for 50V AC/DC and 1A current. Featuring bellowed contact style, made of phosphor bronze, suitable for wire sizes 30-26 AWG. Ideal for applications requiring reliable electrical connections in temperatures ranging from -25 to 85°C.
249-116
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: END PLATE; IEC Conformity: NO; Usage: TERMINAL BLOCK;
WM4P
The TE Connectivity WM4P is an assembly product designed for DTM SERIES applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG. Made of PBT material, it's ideal for power and signal connections in various industries.
M83513/05-07
CONNECTOR ACCESSORY; Manufacturer Series: M83513/05-07; DIN Conformity: NO; MIL Conformity: YES; IEC Conformity: NO; Assembly Item Name: JACKPOST KIT;
830009502
39-00-0048
Molex 39-00-0048 is a male contact assembly item with square pin-socket contact design. It supports wire sizes from 28 AWG to 22 AWG and has a finish thickness of 35. Ideal for use with 5559, 30068, and 42475 series housing applications.
12124075
Delphi Connection Systems
CONNECTOR ACCESSORY; Terminal Length: .224 inch; IEC Conformity: NO; Mounting Style: STRAIGHT; MIL Conformity: NO; DIN Conformity: NO;
13697415
Aptiv
Aptiv 13697415 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has FEMALE contact gender with 0.0748" to 0.0945" cable entry. Ideal for automotive wiring harness assembly due to its precise crimping and compatibility with specified cable types.
10757690
1534809-1
TE Connectivity 1534809-1 backshell has 3 shell sizes, shielding, and 0.189" min cable entry. Ideal for applications requiring steel material, it accommodates up to 0 AWG wire size with 0.433" max cable entry. Mounting options include screw and 14702 for secure installation.
64
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 64;
WM-4P
TE Connectivity's WM-4P is a power and signal assembly item designed for DTM SERIES. With a max operating temp of 125°C and min of -55°C, it supports wires up to 0 AWG. Made of PBT, it's ideal for various applications requiring reliable connections in extreme temperature conditions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
687-749XB16K
Glenair
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Maximum Cable Entry: 1 inch; Assembly Item Name: RING ITEM; DIN Conformity: NO;
687-749XB16
CONNECTOR ACCESSORY; Maximum Cable Entry: 1 inch; MIL Conformity: NO; Material: COMPOSITE; IEC Conformity: NO; Assembly Item Name: RING ITEM;
6-87756-2
TE Connectivity 6-87756-2 CONTACT is a FEMALE BLADE PIN-SKT designed for POWER AND SIGNAL applications. With a rated current of 3A and rated voltage of 250V, it supports wire gauge from 26 to 22 AWG. Operating b/w -65°C to 105°C, it is suitable for DISCRETE WIRE assemblies.
6-87756-7
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 3 A; Mounting Style: STRAIGHT; MIL Conformity: NO; Wire Gauge (AWG): 22;
687-749XB12
CONNECTOR ACCESSORY; IEC Conformity: NO; Material: COMPOSITE; Assembly Item Name: RING ITEM; DIN Conformity: NO; Maximum Cable Entry: .75 inch;
687-748NF-1
CONNECTOR ACCESSORY; Manufacturer Series: 687-748;
687-749XB10
CONNECTOR ACCESSORY; Material: COMPOSITE; Maximum Cable Entry: .63 inch; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: RING ITEM;
687-749XB20
CONNECTOR ACCESSORY; MIL Conformity: NO; Material: COMPOSITE; Assembly Item Name: RING ITEM; Maximum Cable Entry: 1.25 inch; IEC Conformity: NO;
687-749XB28
CONNECTOR ACCESSORY; Maximum Cable Entry: 1.75 inch; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO; Material: COMPOSITE;
6-87756-8
TE Connectivity's 6-87756-8 wire-to-board connector has approvals from CSA and UL, rated for 250V AC/DC with a max operating temp of 105°C. It features crimp terminals, suitable for discrete wire applications with a contact gender of female.
687-749XB22
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Maximum Cable Entry: 1.38 inch; IEC Conformity: NO; Assembly Item Name: RING ITEM;
687-749XB24
CONNECTOR ACCESSORY; Maximum Cable Entry: 1.5 inch; MIL Conformity: NO; Assembly Item Name: RING ITEM; IEC Conformity: NO; Material: COMPOSITE;
687-749XB26
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Material: COMPOSITE; Maximum Cable Entry: 1.63 inch; IEC Conformity: NO;
687-749XB12K
CONNECTOR ACCESSORY; Assembly Item Name: RING ITEM; MIL Conformity: NO; DIN Conformity: NO; Maximum Cable Entry: .75 inch; Material: COMPOSITE;
687-749XB24K
CONNECTOR ACCESSORY; Maximum Cable Entry: 1.5 inch; IEC Conformity: NO; Material: COMPOSITE; MIL Conformity: NO; Assembly Item Name: RING ITEM;
687-749XB32
CONNECTOR ACCESSORY; IEC Conformity: NO; Maximum Cable Entry: 2 inch; MIL Conformity: NO; Assembly Item Name: RING ITEM; Material: COMPOSITE;
687-749XB36
CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: RING ITEM; Maximum Cable Entry: 2.25 inch; DIN Conformity: NO; Material: COMPOSITE;
687-749XB36K
CONNECTOR ACCESSORY; Material: COMPOSITE; Maximum Cable Entry: 2.25 inch; Assembly Item Name: RING ITEM; MIL Conformity: NO; IEC Conformity: NO;
687-749XB22K
CONNECTOR ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Material: COMPOSITE; DIN Conformity: NO; Maximum Cable Entry: 1.38 inch;
687-749XB30K
CONNECTOR ACCESSORY; Material: COMPOSITE; MIL Conformity: NO; Assembly Item Name: RING ITEM; Maximum Cable Entry: 1.88 inch; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved