Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Glenair 500T010M25H08 backshell is MIL-DTL-83513 compliant, made of aluminum alloy, and fits shell size D connectors. It can operate in temperatures ranging from -65°C to 200°C. Ideal for military applications requiring durable and high-temperature resistant connector accessories.
Median Price
$570.657
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$404.586
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
$522.234
Powell Electronics
$619.080
Mouser Electronics
$1,007.410
Newark
$1,070.280
$429.190
DigiKey
$2,196.400
$1,126.042
Verical
$429.872
Air Electro
$397.030
$340.670
DigiKey Marketplace
$1,228.410
Vyrian
Nova Conductors
VNN
Ampacity Inc.
$134.520
Argo Parts USA
Aranea Global
Continental Prestige Electronics
The close proximity of contacts allows for efficient signal transmission and compact design.
High insulation resistance ensures reliable and stable electrical connections.
The connector can withstand high temperatures, making it suitable for various environments.
Capable of carrying a high amount of current, ideal for signal transmission applications.
Withstands repeated connections and disconnections, ensuring long-term reliability.
Crimping provides secure and stable wire connections, reducing the chances of signal interference.
Mil-Spec Backshells and Connector Accessories 500T010M25H08 attributes and parameters. Explore more Mil-Spec Backshells and Connector Accessories devices from Glenair
Assembly Item Name:
Associated Backshell Military - Specifications:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
MIL-Connector Accessory Name:
Mounting Option-2:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shell Sizes:
Glenair manufactures high-reliability connectors and cables for mission-critical land, sea, air, and space applications. The company began operations in 1956 producing electrical connector backshells and accessories. Building on that foundation, we now offer dozens of full-spectrum connector product lines designed to meet every electrical and optical interconnect requirement, including a broad range of military qualified and signature connector designs such as the MIL-DTL-38999 Series III and our micro miniature Series 80 Mighty Mouse. Glenair is a privately-held company whose strengths include ISO 9001 process quality, full-spectrum product lines, fast "turnaround" on quotes and custom orders, unsurpassed sales and technical support in every major market in the world, and the industry's largest standing inventory of commercial and Mil-Spec electrical and optical connector components.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
M39029/88-484
Esterline Technologies
CONNECTOR ACCESSORY; Mating Contacts: M39029/87-472; Alternate Contact Functions: SIGNAL 22-28AWG, ALUMEL, CONSTANTAN, IRON; National Stock Number (NSN): 5999012399735; Contact Gender: FEMALE; Contact Type: CRIMP REAR RELEASE;
M39029/57-357
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-C-24308, MIL-C-55302/68, MIL-C-55302/71, MIL-C-55302/75, MIL-C-83733; Alternate Contacts: 316-2020-106-L; IEC Conformity: NO;
D38999/32W11N
Glenair
CONNECTOR ACCESSORY; DIN Conformity: NO; Material: ALUMINUM ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: COVER ITEM; Associated Military - Specifications: MIL-DTL-38999 SERIES III;
557B316M530TBH
CONNECTOR ACCESSORY;
M85049/88-17W03
Amphenol
CIRCULAR CONN ACCESSORY; IEC Conformity: NO; Material: ALUMINIUM ALLOY; MIL Conformity: YES; Shell Sizes: 17; E; Backshell Clamping: BAND;
M39029/91530
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; MIL Conformity: YES; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; Contact Gender: FEMALE;
M39029/56352
Souriau-sunbank Connection Technologies
CONNECTOR ACCESSORY; Contact Type: CRIMP; Contact Gender: FEMALE; DIN Conformity: NO; MIL Conformity: YES; MIL-Connector Accessory Name: CONTACT;
M39029/30-222
TE Connectivity
TE Connectivity's M39029/30-222 is a Mil-Spec Backshell with CRIMP terminals. It supports wire sizes from 2 AWG to 0 AWG, with a cross-section area of 55 mm² and a rated current of 150 A. Ideal for applications requiring FEMALE contact gender in high-power environments.
M39029/58365
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; Contact Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
D38999/33W15N
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Shell Sizes: 15, D; MIL-Connector Accessory: S943; MIL-Connector Accessory Name: PROTECTIVE COVER; Associated Military - Specifications: MIL-C-38999;
D38999/32F23N
Spacecraft Components
CONNECTOR ACCESSORY; Material: ALUMINUM ALLOY; MIL-Connector Accessory Name: CAP ITEM; Shell Sizes: 23; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO;
M85049/88-15N03
CIRCULAR CONN ACCESSORY; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999 SERIES III & IV; MIL-Connector Accessory Name: BACKSHELL; MIL Conformity: YES; DIN Conformity: NO;
M85049/38-11N
CONNECTOR ACCESSORY; Material: ALUMINUM; IEC Conformity: NO; MIL Conformity: YES; MIL-Connector Accessory Name: CABLE CLAMP; DIN Conformity: NO;
M39029/87-471
CONNECTOR ACCESSORY; MIL Conformity: YES; Removal Tools: M81969/8-02, M81969/14-01; Removal Tool Sources: MILITARY; National Stock Number (NSN): 5999012478993; Manufacturer Series: M39029/87-471;
MS3181-12CAL
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL-Connector Accessory Name: PROTECTIVE COVER; DIN Conformity: NO; Shell Sizes: 12; MIL Conformity: YES;
D38999/33Z13N
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CAP ITEM; Shell Sizes: 13; Associated Military - Specifications: MIL-DTL-38999; MIL Conformity: YES; DIN Conformity: NO;
M85049/88-11Z03
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: BACKSHELL; IEC Conformity: NO; DIN Conformity: NO; Material: ALUMINUM; Associated Backshell Military - Specifications: MIL-DTL-38999;
M39029/64-369
CONNECTOR ACCESSORY; Contact Gender: MALE; Removal Tool Sources: MILITARY; Terminal Type: CRIMP; MIL Conformity: YES; Material: COPPER ALLOY;
M85049/85-12W02
CONNECTOR ACCESSORY; DIN Conformity: NO; Backshell Clamping: BAND; Shell Sizes: 12; MIL-Connector Accessory Name: BACKSHELL; MIL Conformity: YES;
M39029/58-363
CONNECTOR ACCESSORY; Contact Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory: CONTACT; MIL-Connector Accessory Name: CONTACT; IEC Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
500T010M09E07B
CONNECTOR ACCESSORY; Shell Sizes: A; IEC Conformity: NO; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory Name: BACKSHELL; MIL Conformity: YES;
500T010M69H10
CONNECTOR ACCESSORY; Maximum Cable Entry: .312 inch; Material: ALUMINUM ALLOY; MIL-Connector Accessory Name: BACKSHELL; Assembly Item Name: BACKSHELL; Mounting Option-2: JACK SCREW;
500T010M51-2H09
The Glenair 500T010M51-2H09 is a Mil-Spec Backshell and Connector Accessory made of aluminum alloy. It has a MIL-DTL-83513 military specification and can operate in temperatures ranging from -65°C to 200°C. This accessory is designed for use with connectors.
500T010M09B08S
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Backshell Military - Specifications: MIL-DTL-83513; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory Name: BACKSHELL; Mounting Option-2: FILLISTER HEAD;
500T010M09H07
The Glenair 500T010M09H07 backshell is a Mil-Spec accessory made of aluminum alloy for MIL connectors, conforming to MIL-DTL-83513. It has a shell size of A and can operate in temperatures ranging from -65°C to 200°C. The backshell features a hex head mounting option and is ideal for military applications requiring reliable connector accessories.
500T010M51E10
CONNECTOR ACCESSORY; Assembly Item Name: BACKSHELL; Shell Sizes: G; Minimum Operating Temperature: -65 Cel; IEC Conformity: NO; Maximum Operating Temperature: 200 Cel;
500T010M25E08
CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Mounting Option-2: JACKSCREW; Minimum Operating Temperature: -65 Cel; MIL-Connector Accessory Name: BACKSHELL;
500T010M37F09
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Maximum Operating Temperature: 200 Cel; Mounting Option-2: JACKPOST; Material: ALUMINUM ALLOY;
500T010M51B06
CONNECTOR ACCESSORY; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory Name: BACKSHELL; Shell Sizes: G; DIN Conformity: NO; MIL Conformity: YES;
500T010M51B08
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Shell Sizes: G; Maximum Operating Temperature: 200 Cel; DIN Conformity: NO; MIL Conformity: YES;
500T010M51H10
CONNECTOR ACCESSORY; DIN Conformity: NO; Maximum Operating Temperature: 200 Cel; IEC Conformity: NO; MIL Conformity: YES; Mounting Option-2: HEX HEAD;
500T010J15F08M
CONNECTOR ACCESSORY; IEC Conformity: NO; Mounting Option-2: JACKPOST; Maximum Operating Temperature: 175 Cel; Associated Backshell Military - Specifications: MIL-DTL-83513; Minimum Operating Temperature: -65 Cel;
500T010M09H08
The Glenair 500T010M09H08 backshell is a Mil-Spec accessory with shell size A, MIL-DTL-83513 conformity, and aluminum alloy construction. It operates in temperatures ranging from -65°C to 200°C and features a hex head mounting option. Ideal for military connectors, this backshell ensures secure connections in harsh environments.
500T010M15H08
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: BACKSHELL; Mounting Option-2: HEX HEAD; MIL Conformity: YES; Shell Sizes: B; Minimum Operating Temperature: -65 Cel;
500T010M15B06
CONNECTOR ACCESSORY; Shell Sizes: B; Material: ALUMINUM ALLOY; DIN Conformity: NO; Assembly Item Name: BACKSHELL; Mounting Option-2: FILLISTER HEAD;
500T010M25FB05L
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Associated Backshell Military - Specifications: MIL-DTL-83513; MIL Conformity: YES; Material: ALUMINUM ALLOY;
500T010M25H05S
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-83513; IEC Conformity: NO; Shell Sizes: D; DIN Conformity: NO; Maximum Operating Temperature: 200 Cel;
500T010M25BJ04
CONNECTOR ACCESSORY; Maximum Operating Temperature: 200 Cel; Material: ALUMINUM ALLOY; DIN Conformity: NO; IEC Conformity: NO; Associated Backshell Military - Specifications: MIL-DTL-83513;
500T010M25F06L
CONNECTOR ACCESSORY; Maximum Operating Temperature: 200 Cel; IEC Conformity: NO; Shell Sizes: D; DIN Conformity: NO; Material: ALUMINUM ALLOY;
500T010M25N07M
CONNECTOR ACCESSORY; Material: ALUMINUM ALLOY; MIL Conformity: YES; DIN Conformity: NO; Minimum Operating Temperature: -65 Cel; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved