Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Supply Digital
Glotronic Ltd.
Corphita
Multiplexers & Switches MM74HC4066MX_NL attributes and parameters. Explore more Multiplexers & Switches devices from Fairchild Semiconductor
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Normal Position (V):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
MM74HC4066MX_NL Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
1552200168
Molex
WIRE AND CABLE;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
TC4066BP
Toshiba
TC4066BP by Toshiba is a CMOS SPST switch with 4 functions, 14 terminals, and 5V nominal voltage. It operates in industrial temperature range (-40 to 85 °C) and has a max on-state resistance of 950 ohm. Ideal for applications requiring low power consumption and precise signal switching.
74HC4052PW-Q100,11
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG601BRTZ-REEL7
Analog Devices
ADG601BRTZ-REEL7 by Analog Devices is a SPST switch with 6 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 2.5 ohm and switching type BREAK-BEFORE-MAKE. Ideal for industrial applications requiring low-profile, small-outline switches with high isolation levels.
7705201EA
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ADG1408YCPZ-REEL7
ADG1408YCPZ-REEL7 by Analog Devices is an 8-channel CMOS multiplexer with a max on-state resistance of 9 ohm and switching voltage of +-15/+12/+-5 V. Ideal for automotive applications, it operates in temperatures ranging from -40 to 125 °C, with a fast switch-on time of 330 ns.
DG212CJ
Calogic
SPST; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
74HC4067D,653
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
HEF4066BT
NXP Semiconductors
HEF4066BT by NXP Semiconductors is a CMOS SPST switch with 4 functions, 365 ohm Ron, and 80 ns switch-on time. It operates at -40 to 85 °C and has a supply voltage range of 3-15 V. Ideal for industrial applications requiring separate outputs in a compact package.
TS5A23159DGSRE4
TS5A23159DGSRE4 by Texas Instruments is a 2-function SPDT switch with 1.8/5V power supplies, 2.5 ohm max on-state resistance, and 64dB nominal off-state isolation. Ideal for industrial applications, it operates b/w -40 to 85°C with a compact design of 3x3mm and 0.5mm terminal pitch for space-constrained PCBs.
CD4066BCM
National Semiconductor
MAX313LEUE+T
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG884BRMZ-REEL7
ADG884BRMZ-REEL7 by Analog Devices is a CMOS audio/video switch with 2 functions, 0.5 ohm max on-state resistance, and 60 dB nominal off-state isolation. It operates b/w -40 to 85 °C and has a supply voltage range of 1.8V to 5.5V. Ideal for industrial applications requiring fast switching times and high isolation levels.
TS5A21366DCUR
TS5A21366DCUR by Texas Instruments is a CMOS SPST switch with 2 channels, 1.8/5 V power supplies, and 260 kHz nominal bandwidth. With a small outline package style, it's ideal for industrial applications requiring low on-state resistance and high off-state isolation.
ADG819BRTZ-500RL7
ADG819BRTZ-500RL7 by Analog Devices is a SPDT switch with 6 terminals, operating at temperatures from -40 to 125°C. It has a max on-state resistance of 1.4 ohm and switching time of 70 ns, suitable for automotive applications requiring low-profile components with high isolation levels.
74HC4067PW,118
NXP Semiconductors' 74HC4067PW,118 is a CMOS multiplexer with 16 channels and a max supply voltage of 10V. It features a peak reflow temperature of 260°C, on-state resistance of 130 ohm, and switching behavior as break-before-make. Ideal for automotive applications due to its wide operating temperature range (-40 to 125°C) and small outline package style (7.8mm x 4.4mm).
ADG709BRUZ
ADG709BRUZ by Analog Devices is a 16-terminal CMOS multiplexer with a max operating temperature of 125°C. It features a common output, differential multiplexer type, and small outline thin profile package style. Ideal for automotive applications due to its break-before-make switching and high off-state isolation of 60 dB.
CD74HCT4067M
Rca Solid State
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG408DY-T1
Temic Semiconductors
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
TS5A23157DGSRG4
TS5A23157DGSRG4 by Texas Instruments is a 2-function SPDT switch with 10 terminals, operating at -40 to 85°C. It features a max on-state resistance of 140 ohm, peak reflow temp of 260°C, and nominal bandwidth of 220 kHz. Ideal for industrial applications requiring low power consumption and high isolation levels.
ADG411BRZ-REEL7
ADG411BRZ-REEL7 by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and on-state resistance of 35 ohm. It operates in industrial temperature range (-40 to 85 °C) and has separate outputs. Ideal for applications requiring high isolation (68 dB) and fast switching times (175 ns).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved