Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MULTIPLEXER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
$2.052
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Freelance Electronics
1+ parts
100+ parts
$2.155
1k+ parts
$2.032
10k+ parts
-
Vyrian
Anansix
Digiode
ECAB
Microfarads
ComSIT Distribution GmbH
LWI Electronics Inc
Prism Electronics
Holdelec - ElecDif-Pro
EMSNET
ACDS - Activité Composants Distribution Service
Bristol Electronics
Pegasus Components GmbH
Electronic Expediters
Inventory MP
Component Electronics Inc.
GES GmbH
Extreme Components
PC Components Company LLC
Corel Iberica Componentes, S.L.
Mil-Aero Solutions, Inc.
AZTECH Wire
$8.717
Parana Technologies
$13.169
$13.674
DigiPath Technology Company
$14.501
ChromeModa Solutions
$14.797
$12.134
IDEA Electronic Components Group
$14.057
$13.317
One Stop Electronics
$48.000
Corphita
Supply Digital
Perfect Parts
Cyclops Electronics Ltd (Excess)
Assy Fe
Multiplexer & Demultiplexer MM74HC153N attributes and parameters. Explore more Multiplexer & Demultiplexer devices from Fairchild Semiconductor
JESD-30 Code:
JESD-609 Code:
Load Capacitance (CL):
Logic IC Type:
Maximum I (ol):
No. of Functions:
No. of Inputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Propagation Delay At Nominal Supply:
Qualification:
Sub-Category:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
MM74HC153N Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-426-1595, 5962014261595, 5962-99-075-1353, 5962990751353
NIIN
014261595, 990751353
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Promax-johnton
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
CD74HC153ME4
Texas Instruments
CD74HC153ME4 by Texas Instruments is a CMOS multiplexer/demultiplexer with 2 functions and 4 inputs. It has a propagation delay of 44 ns at 4.5V, operates b/w -55 to 125°C, and supports a max supply voltage of 6V. Ideal for military-grade applications requiring fast signal switching in compact designs.
SN54AS253FK
SN54AS253FK by Texas Instruments is a TTL technology multiplexer with 2 functions, 4 inputs, and 20 terminals. It has a propagation delay of 18ns, operates b/w -55 to 125°C, and supports a max power supply current of 14mA. Ideal for military-grade applications requiring high-speed signal switching in a compact chip carrier package.
SN74LVC157AQDRG4Q1
SN74LVC157AQDRG4Q1 by Texas Instruments is a CMOS multiplexer with 4 functions, 2 inputs, and 2 bits. It has a propagation delay of 5.4 ns at 3.3V supply voltage, suitable for automotive applications due to AEC-Q100 screening level. The package is small outline with dual terminals and nickel palladium gold finish, making it ideal for space-constrained designs in automotive electronics.
SN74HC151DR
SN74HC151DR by Texas Instruments is an 8-input multiplexer with a propagation delay of 63ns. Operating at a supply voltage of 5V, it has a max power supply current of 0.08mA. Ideal for industrial applications requiring high-speed data selection in compact designs.
SN74CBT3251DBR
SN74CBT3251DBR by Texas Instruments is a 16-terminal CMOS multiplexer with 0.24 ns propagation delay, 50 pF load capacitance, and 3-STATE output characteristics. Ideal for industrial applications requiring fast signal switching in a compact package with surface mount capability.
PCA9547BS,118
NXP Semiconductors' PCA9547BS,118 is an 8-input multiplexer with a propagation delay of 0.3 ns and operates in industrial temperature range (-40 to 85°C). It features a package style of CHIP CARRIER, VERY THIN PROFILE and is suitable for applications requiring precise signal routing in compact spaces.
JM38510/30906BEA
Motorola
MULTIPLEXER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SN74ALS251DG4
SN74ALS251DG4 by Texas Instruments is a TTL multiplexer with 8 inputs, 3-STATE output, and 24 ns propagation delay at 5V. It comes in a small outline package suitable for commercial applications requiring fast signal switching and low power consumption.
SN74F157ADG4
SN74F157ADG4 by Texas Instruments is a TTL multiplexer with 4 functions and 2 inputs. It has a propagation delay of 8 ns at 5V, making it ideal for high-speed applications. With a small outline package style and surface mount capability, it is suitable for commercial temperature grade environments.
MC74HC151ADG
MC74HC151ADG by Onsemi is an 8-input multiplexer with a propagation delay of 56ns at 4.5V supply, suitable for military-grade applications. It features a max operating temperature of 125°C and offers a small outline package style for surface mount assembly. With a load capacitance of 50pF and complementary output polarity, it is ideal for high-speed signal routing in electronic systems.
SN74HC158N-00
SN74HC158N-00 by Texas Instruments is a CMOS multiplexer with 4 functions and 2 inputs. It operates at a supply voltage range of 2V to 6V, with a propagation delay of 52ns. Ideal for industrial applications requiring inverted output polarity in an inline package style.
SN74ALS157FN-00
SN74ALS157FN-00 by Texas Instruments is a 4:1 multiplexer with 2 inputs, operating at 5V. It comes in a square chip carrier package style, suitable for commercial temperature grades. This TTL technology device has J bend terminals and is ideal for signal routing applications.
5962-8968801FA
Qp Semiconductor
MULTIPLEXER; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 16; Package Code: DFP; Package Shape: RECTANGULAR;
PCA9545APW
PCA9545APW by Texas Instruments is a 4-input multiplexer with 1ns propagation delay. Operating temperature ranges from -40 to 85°C, suitable for industrial applications. It has a small outline package with dimensions of 6.5mm x 4.4mm and supports supply voltage range of 2.3V to 5.5V, making it ideal for compact electronic designs.
SN54AS251FH-00
SN54AS251FH-00 by Texas Instruments is an 8-input multiplexer with a 5V supply voltage, operating b/w -55 to 125°C. It features a ceramic-metal package, 3-state output, and is ideal for military-grade applications requiring TTL technology in a square chip carrier package.
SN74CB3T3253DRG4
SN74CB3T3253DRG4 by Texas Instruments is a 2-function multiplexer/demultiplexer with 16 terminals. It operates at a nominal voltage of 2.5V and has a propagation delay of 0.25ns. Ideal for industrial applications requiring true output polarity and 3-STATE output characteristics.
MAX14724EWP+
Analog Devices
MULTIPLEXER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN SILVER COPPER NICKEL; JESD-609 Code: e2; Peak Reflow Temperature (C): 260;
SN74AHC157DRG4
SN74AHC157DRG4 by Texas Instruments is a 4-function multiplexer with 2 inputs and 1 output. It has a propagation delay of 9.5 ns and operates at a nominal voltage of 3.3V. This IC is commonly used in automotive applications due to its small size, low power consumption, and high temperature tolerance.
SN74LS158NSRG4
SN74LS158NSRG4 by Texas Instruments is a TTL multiplexer with 2 inputs and 4 functions. It has a propagation delay of 15 ns at 5V, making it suitable for high-speed applications. This small outline package with surface mount capability is ideal for commercial temperature grade environments.
74LVC257ADB-T
NXP Semiconductors' 74LVC257ADB-T is a CMOS multiplexer with 4 functions, 2 inputs, and 16 terminals. It operates b/w -40 to 125 °C with a propagation delay of 7 ns. Ideal for automotive applications due to its small outline package and output polarity.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved