Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FET OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; No. of Elements: 1; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .06 A;
Median Price
$0.860
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.550
100+ parts
$0.827
1k+ parts
$0.606
10k+ parts
$0.535
Rochester
-
$0.684
$0.568
$0.506
DigiKey
Flip Electronics (Authorized)
Digiode
Nova Conductors
$1.857
Chip Stock
DigiKey Marketplace
Vyrian
Flip Electronics
A&K Electronics
Bristol Electronics
Corphita
$0.480
Corohmni
$0.533
Ampacity Inc.
$0.990
Continental Prestige Electronics
$1.820
Argo Parts USA
Component Stockers USA
$1.970
$1.860
$1.680
Andel Nordic
$2.353
$2.259
SupplyDigital Components
Kulean Microsystems
Supply Digital
Problanco Electronics
TANS Electronics
UHIMA Technologies
Optocoupler Transistor Outputs H11F3VM attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Fairchild Semiconductor
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Isolation Voltage:
JESD-609 Code:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Terminal Finish:
H11F3VM Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.80.00
SB
PCN Design/Specification - Logo 17/Aug/2017
PCN Assembly/Origin - Mult DEV Mold/Die/Mat 18/Dec/2023
PCN Packaging - Mult Devices 24/Oct/2017
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Sensitron Semiconductor
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
STMicroelectronics
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Shenzhen Socay Electronics
Lite-on Semiconductor
World Products
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TLP291(GRH-TP,SE(T
Toshiba
Toshiba's TLP291(GRH-TP,SE(T optocoupler has a max forward current of 0.05A and isolation voltage of 3750V. Ideal for applications requiring high collector-emitter breakdown voltage (80V) and surface mounting feature. Operating temp ranges from -55 to 110°C, with a min current transfer ratio of 150%.
MCT62
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum On State Current: .03 A; Maximum Forward Voltage: 1.5 V; JESD-609 Code: e0;
PC357N3J000F
Sharp Corporation
Sharp Corporation's PC357N3J000F is a SINGLE optocoupler with max. forward current of 0.05A, operating temp. range -30 to 100°C, and collector-emitter breakdown voltage of 80V. With a transfer ratio of 200%, it offers isolation voltage up to 3750V making it ideal for applications requiring high electrical isolation like industrial control systems.
H11G2M
DARLINGTON OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Dark Current: 100 nA; Maximum Forward Current: .06 A; Maximum Operating Temperature: 100 Cel;
4N25M
4N25M by Onsemi is a single optocoupler with max forward current of 0.06A and max operating temp of 100°C. Ideal for applications requiring transistor output optocouplers, it offers high isolation voltage of 7500V and low dark current of 50nA.
FODM121R2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 3750 V; Maximum Forward Current: .05 A;
4N35
Aborn Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 100 %; Maximum Isolation Voltage: 2500 V; Minimum Collector-emitter Breakdown Voltage: 30 V; Configuration: SINGLE; No. of Elements: 1;
TCMT4100
Vishay Telefunken
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -40 Cel; Configuration: SEPARATE, 4 CHANNELS; Maximum Isolation Voltage: 3750 V; Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED;
SFH6156-3
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Maximum Operating Temperature: 100 Cel; No. of Elements: 1; Configuration: SINGLE;
Marktech Optoelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Response Time: .00001 s; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 3500 V;
TLP185(GR,TPL,SE(T
TLP185(GR,TPL,SE(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has an isolation voltage of 3750 V. It is commonly used for surface mount applications requiring high voltage breakdown and low dark current.
Lite-on Technology
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 30 V; Additional Features: UL RECOGNIZED; No. of Elements: 1; Maximum Isolation Voltage: 2500 V; Minimum Operating Temperature: -55 Cel;
HMHA281R2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Configuration: SINGLE; Nominal Current Transfer Ratio: 50 %; Minimum Collector-emitter Breakdown Voltage: 80 V; JESD-609 Code: e3;
FOD817DSD
FOD817DSD by Onsemi is a SINGLE optocoupler with max. forward current of 0.05A, min. transfer ratio of 300%, and max. isolation voltage of 5000V. Ideal for applications requiring high voltage isolation such as industrial controls, power supplies, and motor drives due to its surface mounting feature and fast response time of 18μs.
SFH6156-2T
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 45 %; Maximum Dark Current: 50 nA; Maximum Isolation Voltage: 5300 V; Additional Features: UL RECOGNIZED, VDE APPROVED;
TLP521-4GR
Isocom Components
TLP521-4GR by Isocom Components is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and min current transfer ratio of 100%. Ideal for applications requiring high isolation voltage up to 5300V, such as in industrial control systems.
CNY74-2H
TRANSISTOR OUTPUT OPTOCOUPLER; Additional Features: UL RECOGNIZED; Maximum Forward Current: .06 A; Minimum Operating Temperature: -40 Cel; Nominal Current Transfer Ratio: 120 %; Maximum Isolation Voltage: 5000 V;
PS2801C-4-F3-A
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Isolation Voltage: 2500 V; Additional Features: UL RECOGNIZED; Maximum Dark Current: 100 nA; Maximum Forward Current: .03 A;
SFH6186-3T
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Dark Current: 200 nA; Minimum Collector-emitter Breakdown Voltage: 55 V; Configuration: SINGLE; Maximum Forward Current: .05 A; Minimum Operating Temperature: -55 Cel;
FOD817B300W
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 110 Cel; Minimum Current Transfer Ratio: 130 %; Minimum Collector-emitter Breakdown Voltage: 70 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
H11F1SM
The Onsemi H11F1SM is a FET output optocoupler with a max forward current of 0.06A and isolation voltage of 7500V. It operates b/w -40 to 100°C, has a response time of 25ns, and can handle up to 1A on-state current. Ideal for applications requiring high voltage isolation in surface mount configurations.
FET OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; Configuration: SINGLE; Maximum Isolation Voltage: 7500 V;
FET OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 5300 V; JESD-609 Code: e0; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Dark Current: 50 nA;
Harris Semiconductor
FET OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .06 A; No. of Elements: 1; Maximum Forward Voltage: 1.7 V;
H11F1M
H11F1M by Onsemi is a SINGLE optocoupler with FET OUTPUT. It has a max forward current of 0.06A, isolation voltage of 7500V, and response time of 25ns. Ideal for applications requiring high-speed signal transmission and electrical isolation in temperature range -40 to 100°C.
FET OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Configuration: SINGLE; Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -40 Cel;
H11F1SR2M
FET OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED; Configuration: SINGLE;
The Onsemi H11F1SR2M is a single optocoupler with FET output. It has a max forward current of 0.06A, isolation voltage of 7500V, and response time of 25ns. Ideal for applications requiring high-speed signal transmission in temperature range -40 to 100°C.
H11F3M
The Onsemi H11F3M is a single optocoupler with FET output, ideal for applications requiring high isolation voltage up to 7500V. It features a max forward current of 0.06A and response time of 25ns, making it suitable for through-hole mounting in temperature ranges from -40°C to 100°C.
FET OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .06 A; Configuration: SINGLE; JESD-609 Code: e3;
H11F3SVM
FET OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum On State Current: 1 A; No. of Elements: 1; Maximum Power Dissipation: .1 W;
FET OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 7500 V; Additional Features: UL RECOGNIZED, VDE APPROVED; Configuration: SINGLE;
H11F1TVM
FET OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Configuration: SINGLE; Maximum Operating Temperature: 100 Cel;
The Onsemi H11F1TVM is a FET output optocoupler with max forward current of 0.06A and isolation voltage of 7500V. Ideal for applications requiring high-speed response, it operates b/w -40 to 100°C, making it suitable for various industrial and electronic systems. With a through-hole mount feature, it offers reliable performance in demanding environments.
H11F1VM
FET OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 7500 V; Maximum Operating Temperature: 100 Cel;
FET OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum On State Current: 1 A; Maximum Isolation Voltage: 7500 V; Maximum Forward Current: .06 A;
H11F3SR2VM
FET OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Isolation Voltage: 7500 V; Maximum Forward Current: .06 A; Configuration: SINGLE;
FET OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .06 A; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3; No. of Elements: 1;
H11F3VM
H11F3VM by Onsemi is a single optocoupler with FET output. It has a max forward current of 0.06A, isolation voltage of 7500V, and response time of 25ns. Ideal for applications requiring high voltage isolation and fast switching speeds in temperatures ranging from -40°C to 100°C.
H11F3TVM
FET OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 7500 V; No. of Elements: 1; Maximum Forward Current: .06 A; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved